Mouse pointer issue
MYTH37
Posted messages
34
Registration date
Status
Member
Last intervention
-
MYTH37 Posted messages 34 Registration date Status Member Last intervention -
MYTH37 Posted messages 34 Registration date Status Member Last intervention -
Hello,
For work, I use AutoCAD 2006 (I don't like the newer versions) LT.
I was absent for a month. Everything was fine before, but during my absence, a colleague used my PC for CAD work.
However, when I returned, the problem was as follows:
The mouse pointer (the cross with the square inside) behaves as if the PC is lagging.
I work very quickly with the software, so the pointer needs to be smooth. But when I move it quite quickly, it can't keep up... It remains visible at one point and then appears a bit further away, exactly as if the PC can't keep up with my movement. (I hope I'm clear enough)
The same goes for drawing. Whether it's a line, a polyline, a rectangle, a circle, etc.
Dynamic inputs, snap, and all that stuff are disabled, but nothing helps.
A colleague and I thought it was due to the drawing template. But eventually, that wasn't the case.
The pointer in Paint (working with the same specifications) works perfectly. The mouse arrow also works very well.
It's only when I'm in AutoCAD (model space AND layout) that it's not smooth...
So the issue is in the software.
No possibility of changing the motherboard; in fact, that's not the problem...
The light is not the issue; it worked for several years.
It's very unpleasant since I now feel like I'm working faster than the software.
If you have any solutions, I'm all ears. (No need to post comments like: use a newer version than 2006).
Thank you!
For work, I use AutoCAD 2006 (I don't like the newer versions) LT.
I was absent for a month. Everything was fine before, but during my absence, a colleague used my PC for CAD work.
However, when I returned, the problem was as follows:
The mouse pointer (the cross with the square inside) behaves as if the PC is lagging.
I work very quickly with the software, so the pointer needs to be smooth. But when I move it quite quickly, it can't keep up... It remains visible at one point and then appears a bit further away, exactly as if the PC can't keep up with my movement. (I hope I'm clear enough)
The same goes for drawing. Whether it's a line, a polyline, a rectangle, a circle, etc.
Dynamic inputs, snap, and all that stuff are disabled, but nothing helps.
A colleague and I thought it was due to the drawing template. But eventually, that wasn't the case.
The pointer in Paint (working with the same specifications) works perfectly. The mouse arrow also works very well.
It's only when I'm in AutoCAD (model space AND layout) that it's not smooth...
So the issue is in the software.
No possibility of changing the motherboard; in fact, that's not the problem...
The light is not the issue; it worked for several years.
It's very unpleasant since I now feel like I'm working faster than the software.
If you have any solutions, I'm all ears. (No need to post comments like: use a newer version than 2006).
Thank you!
3 answers
Hello,
I did have an idea, but in light of:
There's no point in posting comments like: ...
I'm not sure if it will match your list of biases. So I will refrain from doing so...
I did have an idea, but in light of:
There's no point in posting comments like: ...
I'm not sure if it will match your list of biases. So I will refrain from doing so...