Acer Aspire 5536 Black Screen

kinedimo Posted messages 26 Registration date   Status Member Last intervention   -  
 infomania -
Hello,

I'm not sure if I'm in the right forum.
Let me explain the situation.
My Acer Aspire 5536 computer won't turn on, or more precisely, the screen won't turn on.

I can't see the BIOS screen. There are no lines visible. No visible signs of life on the screen.

When I press the power button, the computer powers up, the blue LED turns on, I hear the fan and the CD drive. The battery charge LED lights up.

So I tried the common troubleshooting steps: without the battery or charger, I pressed the power button for 30 seconds to drain the electricity, but that didn't work.
I removed one RAM stick then the other, swapped the RAMs, still nothing.
I tried another external screen, still nothing.

Now I would like to try flashing the BIOS with a USB drive. I've tried to find the latest version of the BIOS for the Acer Aspire 5536 without success.

Can anyone tell me where I could find this BIOS version?

I should mention that I didn't install any new drivers, software or hardware before the problem occurred.

I know it could be the GPU, the motherboard, the CPU... that could be faulty, but I still want to give it a try.

Thank you in advance for your help.

Configuration: Windows 7 / Firefox 20.0

2 answers

  1. infomania
     
    Yes, I’d be happy to help you even if I’m two years late, lol. I hope you kept your PC; it’s easily repairable. It could either be the graphics card or a defective BIOS. If the BIOS is corrupted, it’s normal that there’s no display even externally, so you just need to flash it using a USB key with the BIOS file from the manufacturer’s site. There’s a little trick to get the PC to start the emergency flash. I have a machine that flashes the EEPROM chip that contains the BIOS, but in my case, I have to desolder the chip, flash it, and then re-solder it, which takes a bit longer. If it’s the graphics card, you can heat your motherboard in the oven for three minutes at 220°C for beginners; otherwise, you’ll need a blowtorch held 4 cm from the graphics card for two minutes with a flame height of 2 cm, not exceeding 230°C. Ideally, a reballing is the best option, but then you need to be equipped with a machine costing €1,000, lol. Well, I’ve talked to you about the graphics card and the BIOS, but it could also be your display; try using an external monitor to see if it works, and also try changing the RAM sticks before putting it in the oven. ;)
    4
  2. kinedimo Posted messages 26 Registration date   Status Member Last intervention   6
     
    Can someone help me?
    0