View original (French)

The ink absorber is full canon mp250

kais1976 Posted messages 27 Status Member -  
 DD-63 -
Hello,

I have a Canon MP250 Pixma printer that is connected with an ink kit; it's performing luxuriously, but unfortunately, it has indicated that the ink absorber is nearly full.

Please find me a solution for the printer such as how to reset it...etc.

1 answer

  1.
    jmarion3 Posted messages 49498 Registration date   Status Contributor Last intervention   5 513
     
    Hello;

    Maybe the solution is at >> this link

    See you for the result
    --
    Thank you for kindly letting us know if your issue is resolved by activating this feature in the designated area
    Best regards and see you soon
    12
    1. clictique Posted messages 4 Status Member
       
      18 months later, this answer has perfectly helped my MP 240, which will be able to run again!! ;)
      Thank you jmarion3!!
      0
    2. Arizonapeach
       
      Hello, I have the same problem but with an MP230, the ink absorber is full!
      If you have a solution, please share!! :)
      0
    3. Byllana53
       
      Thank you very much, I just encountered the same issue and I tested your two solutions. It took me some time to understand everything but I managed. The only thing I didn't see once the printer was turned back on was that the error light was still on, but I just had to reprint a document and everything went back to normal. Thank you!
      0
    4. DD-63
       
      Thank you very much, it works!
      0