Appuyez sur une touche pour démarrer à partir du disque flexible.
morelia68
Posted messages
8
Status
Member
-
nathan 60 Posted messages 2329 Status Contributor -
nathan 60 Posted messages 2329 Status Contributor -
Hello,
Configuration: Windows 7 / Internet Explorer 9.0
I came back from work and I encountered this message when restarting my PC.
I did some research online, but none of it addresses my issue.
I haven't installed anything recently, nor unplugged anything...
Could you please help me?
Best regards.
Configuration: Windows 7 / Internet Explorer 9.0
I came back from work and I encountered this message when restarting my PC.
I did some research online, but none of it addresses my issue.
I haven't installed anything recently, nor unplugged anything...
Could you please help me?
Best regards.
2 answers
-
Are you talking about floppy disks from back in the day?
My computer isn't even a year old... :s
I don't have a floppy disk drive on it.
Could you please be kind enough to explain to me, the novice, how to set the main hard drive as the first one?
Thank you very much.-
If I believe the displayed message, although your PC is recent, it still supports floppy disk drives, and the BIOS is set to boot from any connected drive.
At startup, enter the BIOS setup. The key is indicated right at the start of the PC, before Windows boots (where the manufacturer's logo is usually displayed).
Look in the different categories for an option called "Boot sequence," or something similar. Then, following the indicated commands, move your hard drive to the top of the displayed list.
It's difficult for me to help you find where and how to modify the boot sequence, as each BIOS is different...
-