View original (French)

Mapping issues on eMule

Solved
benr75020 Posted messages 381 Status Member -  
Miura564 Posted messages 14829 Registration date   Status Member Last intervention   -
Hi everyone
I want to set eMule to high ID, so I opened the TCP and UDP ports on my Freebox, but when I try to configure them, this message appears: << port mapping failed with UPnP, please set up the mapping manually >>

Thanks in advance

Configuration: iPhone - iPhone OS 6.0.1

15 answers

  1.
    benr75020 Posted messages 381 Status Member 36
     
    Hi and thank you for your response
    Well, I went to my subscriber area on free.fr and I opened the TCP and UDP ports with the numbers that are in eMule via preferences>connection.
    4
  2. benr75020 Posted messages 381 Status Member 36
     
    Help me please.
    0
  3. oxfore Posted messages 27 Status Member 2
     
    Do you do everything properly?
    Tell us what you do so we can see.
    0
  4. benr75020 Posted messages 381 Status Member 36
     
    Please help me.
    0
  6. benr75020 Posted messages 381 Status Member 36
     
    Aidez-moi s'il vous plaît.
    0
  8. benr75020 Posted messages 381 Status Member 36
     
    Thank you, I’ll take a look and thank you again for your response.
    0
  10. benr75020 Posted messages 381 Status Member 36
     
    I’m posting this to bring the topic back up.
    0
  11. benr75020 Posted messages 381 Status Member 36
     
    Is there anyone who can help me please???
    0
  12. benr75020 Posted messages 381 Status Member 36
     
    For the New Year, can someone help me? Anyway, a beautiful and happy New Year 2013 to all those who read this message, but if you can help me, that would be really nice.
    0
  14. benr75020 Posted messages 381 Status Member 36
     
    Hi and thank you for your help
    I went to the link in the response on the forum, I did the bandwidth test on the site and I copied the parameters that were indicated to me, but it doesn't change anything, mapping failure, no search results except in kad mode, and the port test shows this << TCP test failed >> I don't understand where the problem is coming from.
    0
  15. benr75020 Posted messages 381 Status Member 36
     
    What should I do?
    0
  16. Miura564 Posted messages 14829 Registration date   Status Member Last intervention   1 560
     
    You need to open the ports on your router and configure them in eMule either during installation or in the settings after installation.
    0