View original (French)

Put Oceanic TV in standby without a remote

Solved
Chabada -  
 Anonymous user -
Hello, I lost the original remote control and so I bought a universal one that works very well but can only be programmed with the TV in standby. However, manually, it is either off or on... :-((
How can I put it in standby to program the remote control? I tried using the codes with the TV on without success. I also unplugged the power while it was on, pressed both channel buttons at the same time, still no luck.
Thanks in advance

Configuration: Windows Vista / Safari 535.19

1 réponse

Réponse 1 / 1
regcal
 
and by pressing and holding the standby button on the remote until it goes into standby?
0
Chabada
 
Well no, precisely because the remote control is not yet recognized by the TV.
There is a blinking but nothing happens.
Thanks anyway.
0
regcal
 
Normally, pressing the standby button scans the frequency and can turn off the TV; check with the remote control's manual.
0
Anonymous user
 
Hello, normally your TV just needs to be turned on, when searching for the codes with the remote control or if you enter one directly on the remote, after validating the code, your remote will change the TV channel or turn it off, that will be the sign that the remote is set to the infrared code of the TV.
0
Chabada > Anonymous user
 
Indeed, you just had to believe... I followed the procedure with the TV on. I entered the Océanic brand code on the remote, then I changed the channel and... it worked. Everything's good.
Thank you all very much. I still don't know how to put it on standby without the remote, but thanks to you, I no longer need it. ;-)
0
Anonymous user > Chabada
 
You simply can't put your TV to sleep without the remote control
You can only operate the TV without the remote in two ways: turn it on or off
Happy channel surfing to you
Have a good evening and a great weekend
0