PB affichage sur la TV avec carte ATI radeon

Question

bonjour,

J'ai une carte ati radeon 9550  j'essaie sans succès de mettre ubuntu sur ma télé. Lors du démarrage du PC, les images du logo de mon pC apparaissent et dès que gdm doit se lancer, l'image se deforme avec des rayures partout, par contre il y a du son. La definition est en 800x600. J'ai essayé avec le live CD, idem.

Y at-il quelquechose de particulier à modifier dans /etc/X11/xorg.conf ?

Avant ubuntu, j'avais mandriva sur la télé avec l'option "fdev" et ça marchait.

merci d'avance pour votre aide

Ps: le branchement entre le PC et la télé est en S-VIDEO via un adaptateur péritel.

pristella · Answer

Salut,

j'ai reussi à afficher ubuntu sur ma télé. Pour ça il a fallu que je fasse un "dpkg-reconfigure xserver-xorg" et que je choisisse le driver "vesa" dans xorg.conf.

Hier, j'avais fait exactememnt la même chose sans succès et j'ai compris que le problème venait de l'affichage du démarrage graphique de ubuntu. j'ai donc supprimé dans grub "quiet splash" pour avoir le detail du démarrage en mode texte. Ensuite pas de problème le bureau s'affiche normalement. 
Il faut donc très certainement faire un réglage de définition du démarrage graphique d'ubuntu mais je ne sais pas comment faire ça ??

Ensuite j'ai installé l'accélération 3D en utilisant les driver propriétaire d'ATI. Tout s'est bien passé et le resultat est honorable :

12101 frames in 5.0 seconds = 2420.176 FPS
13002 frames in 5.0 seconds = 2600.245 FPS
13003 frames in 5.0 seconds = 2600.476 FPS
13003 frames in 5.0 seconds = 2600.560 FPS

néanmoins, j'ai un petit soucis, j'ai l'impression que l'ecran siffle, c'est léger mais on l'entends. Si je fais une action (ouverture d'un programmeou autre) le sifflement augmente puis diminue??

Pour info voilà mon xorg.conf :

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
	Identifier     "Default Layout"
	Screen      0  "aticonfig-Screen[0]" 0 0
	InputDevice    "Generic Keyboard"
	InputDevice    "Configured Mouse"
	InputDevice    "stylus" "SendCoreEvents"
	InputDevice    "cursor" "SendCoreEvents"
	InputDevice    "eraser" "SendCoreEvents"
EndSection

Section "Files"

	# path to defoma fonts
	FontPath     "/usr/share/X11/fonts/misc"
	FontPath     "/usr/share/X11/fonts/cyrillic"
	FontPath     "/usr/share/X11/fonts/100dpi/:unscaled"
	FontPath     "/usr/share/X11/fonts/75dpi/:unscaled"
	FontPath     "/usr/share/X11/fonts/Type1"
	FontPath     "/usr/share/X11/fonts/100dpi"
	FontPath     "/usr/share/X11/fonts/75dpi"
	FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load  "bitmap"
	Load  "ddc"
	Load  "dri"
	Load  "extmod"
	Load  "freetype"
	Load  "glx"
	Load  "int10"
	Load  "type1"
	Load  "vbe"
EndSection

Section "InputDevice"
	Identifier  "Generic Keyboard"
	Driver      "kbd"
	Option	    "CoreKeyboard"
	Option	    "XkbRules" "xorg"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "fr"
	Option	    "XkbVariant" "latin9"
EndSection

Section "InputDevice"
	Identifier  "Configured Mouse"
	Driver      "mouse"
	Option	    "CorePointer"
	Option	    "Device" "/dev/input/mice"
	Option	    "Protocol" "ExplorerPS/2"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "true"
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "stylus"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "stylus"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "eraser"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "eraser"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
	Identifier  "cursor"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"          # Change to 
	Option	    "Type" "cursor"
	Option	    "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "Monitor"
	Identifier   "Generic Monitor"
	HorizSync    28.0 - 38.0
	VertRefresh  43.0 - 72.0
	Option	    "DPMS"
EndSection

Section "Monitor"
	Identifier   "aticonfig-Monitor[0]"
	Option	    "VendorName" "ATI Proprietary Driver"
	Option	    "ModelName" "Generic Autodetecting Monitor"
	Option	    "DPMS" "true"
EndSection

Section "Device"
	Identifier  "ATI Technologies, Inc. RV350 AS [Radeon 9600]"
	Driver      "vesa"
	Option	    "UseFBDev" "true"
	BusID       "PCI:1:0:0"
EndSection

Section "Device"
	Identifier  "aticonfig-Device[0]"
	Driver      "fglrx"
EndSection

Section "Screen"
	Identifier "Default Screen"
	Device     "ATI Technologies, Inc. RV350 AS [Radeon 9600]"
	Monitor    "Generic Monitor"
	DefaultDepth     24
	SubSection "Display"
		Depth     1
		Modes    "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     4
		Modes    "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     8
		Modes    "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     15
		Modes    "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     16
		Modes    "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     24
		Modes    "800x600" "640x480"
	EndSubSection
EndSection

Section "Screen"
	Identifier "aticonfig-Screen[0]"
	Device     "aticonfig-Device[0]"
	Monitor    "aticonfig-Monitor[0]"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

Section "DRI"
	Mode         0666
EndSection

et glxinfo :

name of display: :0.0
display: :0  screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
    GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
    GLX_EXT_import_context, GLX_OML_swap_method, GLX_SGI_make_current_read,
    GLX_SGIS_multisample, GLX_SGIX_hyperpipe, GLX_SGIX_swap_barrier,
    GLX_SGIX_fbconfig
client glx vendor string: ATI
client glx version string: 1.3
client glx extensions:
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context,
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_ATI_pixel_format_float,
    GLX_ATI_render_texture
GLX version: 1.2
GLX extensions:
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context,
    GLX_ARB_multisample
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9550 Generic
OpenGL version string: 2.0.5814 (8.25.18)
OpenGL extensions:
    GL_ARB_multitexture, GL_EXT_texture_env_add, GL_EXT_compiled_vertex_array,
    GL_S3_s3tc, GL_ARB_depth_texture, GL_ARB_fragment_program,
    GL_ARB_fragment_program_shadow, GL_ARB_fragment_shader,
    GL_ARB_multisample, GL_ARB_occlusion_query, GL_ARB_point_parameters,
    GL_ARB_point_sprite, GL_ARB_shader_objects, GL_ARB_shading_language_100,
    GL_ARB_shadow, GL_ARB_shadow_ambient, GL_ARB_texture_border_clamp,
    GL_ARB_texture_compression, GL_ARB_texture_cube_map,
    GL_ARB_texture_env_add, GL_ARB_texture_env_combine,
    GL_ARB_texture_env_crossbar, GL_ARB_texture_env_dot3,
    GL_ARB_texture_mirrored_repeat, GL_ARB_transpose_matrix,
    GL_ARB_vertex_blend, GL_ARB_vertex_buffer_object, GL_ARB_vertex_program,
    GL_ARB_vertex_shader, GL_ARB_window_pos, GL_ARB_draw_buffers,
    GL_ATI_draw_buffers, GL_ATI_element_array, GL_ATI_envmap_bumpmap,
    GL_ATI_fragment_shader, GL_ATI_map_object_buffer, GL_ATI_separate_stencil,
    GL_ATI_texture_env_combine3, GL_ATI_texture_float,
    GL_ATI_texture_mirror_once, GL_ATI_vertex_array_object,
    GL_ATI_vertex_attrib_array_object, GL_ATI_vertex_streams,
    GL_ATIX_texture_env_combine3, GL_ATIX_texture_env_route,
    GL_ATIX_vertex_shader_output_point_size, GL_EXT_abgr, GL_EXT_bgra,
    GL_EXT_blend_color, GL_EXT_blend_func_separate, GL_EXT_blend_minmax,
    GL_EXT_blend_subtract, GL_EXT_clip_volume_hint,
    GL_EXT_draw_range_elements, GL_EXT_fog_coord, GL_EXT_framebuffer_object,
    GL_EXT_multi_draw_arrays, GL_EXT_packed_pixels, GL_EXT_point_parameters,
    GL_EXT_rescale_normal, GL_EXT_secondary_color,
    GL_EXT_separate_specular_color, GL_EXT_shadow_funcs, GL_EXT_stencil_wrap,
    GL_EXT_texgen_reflection, GL_EXT_texture3D,
    GL_EXT_texture_compression_s3tc, GL_EXT_texture_cube_map,
    GL_EXT_texture_edge_clamp, GL_EXT_texture_env_combine,
    GL_EXT_texture_env_dot3, GL_EXT_texture_filter_anisotropic,
    GL_EXT_texture_lod_bias, GL_EXT_texture_mirror_clamp,
    GL_EXT_texture_object, GL_EXT_texture_rectangle, GL_EXT_vertex_array,
    GL_EXT_vertex_shader, GL_HP_occlusion_test, GL_NV_blend_square,
    GL_NV_occlusion_query, GL_NV_texgen_reflection, GL_SGI_color_matrix,
    GL_SGIS_generate_mipmap, GL_SGIS_texture_border_clamp,
    GL_SGIS_texture_edge_clamp, GL_SGIS_texture_lod, GL_SUN_multi_draw_arrays
glu version: 1.3
glu extensions:
    GLU_EXT_nurbs_tessellator, GLU_EXT_object_space_tess

 
vous remarquerez que vesa est toujours present ??? 

peut-être que quelqu'un aurait des explications à me donner?

merci d'avance

A+

PB affichage sur la TV avec carte ATI radeon

1 réponse

Votre réponse

Discussions similaires

Newsletters