E90 ERROR ON EPSON RX520

Question

HELLO I bought a multifunction printer RX520  EPSON and I have an error that appears during the initialization of the printer E90 Could you help me? Thank you, see you soon.

Jann31 · Accepted Answer

Hello,  Here are some tips to troubleshoot this error on this site: http://imprimante-en-question.blogspot.com/2009/02/erreur-e-90-imprimantes-epson.html  Good luck,

sterke.christian · Answer

Hello,

I also bought an Epson RX 520 printer; it was the demo one, so I do not have the corresponding manual. Would it be possible for you to send me a copy of this book? (Of course, I will pay whatever is needed.) Did you manage to fix the E90 error, and if so, how?
Thank you in advance.
Best regards.
Chris.

sterke.christian@neuf.fr or 06 64 93 46 69

tcn · Answer

Hello Have you found a solution I have the same problem as well. You can contact me at: 06.19.42.45.17

cinghina irinel · Answer

HELLO I bought a multifunction printer RX520 EPSON and I have an error that appears during the initialization of the printer E90 Could you help me? Thank you, see you soon.

bekos77 · Answer

Hello,

I also had the same problem as you. The issue is that there is an object in your machine. Look for something inside the machine because I searched and found something in there, and I restarted my machine and everything worked perfectly!

More info? bekos77@hotmail.fr

madison · Answer

J'ai cherché et il y avait bien un objet mais je l'ai enlevé et ça ne marche toujours pas ? :s

sussi · Answer

Hello everyone, this is about a problem with a rous to replace. (tire)

Post to this thread

Error message RX520 by Onkel (10/18/07 12:08 AM) reply + / -
Hi,

I have an Epson RX520. If I turn it on, it says "E-90" and there is a picture with three wheels on it.

Does anybody know what error this could be?

Thanks.

Re: Error message RX520 by Anonymous (12/25/07 9:40 AM) reply + / -
yes
the wheels means that the printer needs a new tire, just take off the old tire and replace it with a new one, then you'll see the printer run off...

Re: Error message RX520 by Anonymous (5/18/08 2:19 PM) reply + / -
I've got the same problem. I assume the cogs mean it's a mechanical failure but I don't have a clue how to fix it.

Good luck
Best regards

SUSSI

printing · Answer

Hello
I am a printer technician and I just got the error code E 90
For my printer, it was just a black adhesive film that is applied to the vertical back of the frame in front of which the print head moves that had come off the frame and stuck to the translucent and flexible gray strip
that can be seen just above the yellow notched belt that allows the print block to move.
You just need to peel off the black film, which is mainly there for aesthetic reasons, and your printer will work again
That's all
Another possibility
Following a paper jam, you might have a piece of paper that has been pushed to one side of the printer by the print head and that prevents either the rotation of a gear on the left or the repositioning of the cleaning unit for the head on the right
There you go

pergain · Answer

I had the same problem, error E90, there were two pens that had fallen into the printer near the paper feed system. Problem solved.

martine · Answer

I simply had the paper rolled up in the drawer.

Major Fatal · Answer

Well, I had this code. No matter how much I searched, nada: no paper, no thing hanging... So, just to be sure, I slowly turned the yellow belt. Restarting: hop! Good as new... until next time? o:)

E90 ERROR ON EPSON RX520

11 answers

Unrefreshed usb drive on android interface

Erreur de captcha

How to delete quarantine files in defender?

Issue with accents

Https://www.youtube.com/@topblazo

Unable to type the at-sign

Reinstallation of w11 impossible after pc crash...

Download impossible for visual petanque

Connect external dvd player to samsung tablet

Phone not receiving certain sms