View original (French)

Coupling 2 sound reinforcement amplifiers

mouvet jeremy Posted messages 253 Status Member -  
 Michel -
Hello, can we connect 2 sound amplifiers together?

One amplifier from Pioneer with 2 x 150 Watts at 6 ohms or 16 ohms
One amplifier from a German brand with 2 x 150 watts at 8 ohms
A Gemini mixing console with only the master output for the amplifier, so stereo
2 JB System speakers of 300 watts at 8 ohms

And I saw on other forums that it is necessary to respect the impedance in relation to the amplifiers and the mixing console, and that we can do parallel wiring from the master output to the amplifiers?

Configuration: Windows 7 / Firefox 5.0.1

Fairground party in the North and Belgium

7 answers

  1.
    vieu bison boiteu Posted messages 44334 Registration date   Status Contributor Last intervention   Ambassadeur 3 591
     
    Hi Mouvet Jérémy,

    at output, you don't have the same impedance

    I'll put an amplifier on the right channel
    and the other amplifier on the left channel
    the amplifiers in mono

    see you +
    --
    no link on the webpage in English, I'm already flying solo enough
    4
    1. sawsix Posted messages 4824 Registration date   Status Member Last intervention   1 035
       
      Hmm, telling him that without knowing if his amplifiers support bridging isn't very smart.
      0
    2. Michel
       
      Hello,
      Personally, my problem is simple:
      My home cinema amplifier is a YAMAHA RX-V 440 RDS, which has no pre-out output, and I need to connect it to another home cinema amplifier, but I don't know how to do that.
      How can I connect two home cinema amplifiers together, please??
      Thank you very much in advance for your response.
      Best regards

      Michel
      0