Parser view cisco

Bonjour, je cherche a configué parser view sur mon routeur 1841 mais lorsque je mets la commande il me met No view Active! Switch to View Context et voici la vérification du routeur
router#sh run
Building configuration...

Current configuration : 1155 bytes
!
! Last configuration change at 20:26:04 UTC Fri Jul 8 2011 by admin
!
version 15.0
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname nedgeps
!
boot-start-marker
boot-end-marker
!
enable secret 5 $1$v0tG$RPC/7qnQKMhYv.4euDAgc.
!
aaa new-model
!
!
aaa authentication login default group radius local
aaa authorization exec default group radius if-authenticated
!
!
aaa session-id common
!
!
dot11 syslog
ip source-route
!
!
ip cef
ip domain name nedgeps.lan
!
multilink bundle-name authenticated
!
!
license udi pid CISCO1841 sn FCZ102720RH
!
redundancy
!
!
interface FastEthernet0/0
ip address 10.10.10.30 255.255.255.128
duplex auto
speed auto
!
!
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
!
ip forward-protocol nd
no ip http server
no ip http secure-server
!
!
!
!
!
!
!
radius-server host 10.10.10.5 auth-port 1645 acct-port 1646 key cisco123
!
control-plane
!
!
!
line con 0
line aux 0
line vty 0 4
transport input telnet ssh
line vty 5 15
transport input telnet ssh
!
scheduler allocate 20000 1000
end