View original (French)

SOS, connect DJX750 DJ mixer to PC

malek.stefan Posted messages 13 Status Member -  
steve89 Posted messages 4 Status Member -
Hello, I would like to know please how I can connect a Behringer DJX-750 mixer (not containing a USB port) to a PC, I have a Logitech 5.1 audio system and a Hercules MK2 console that I could also connect, to Virtual DJ or Tracktor.

PS: do I need an audio interface like the UCA 202 or the Audacity software in addition?

1 answer

  1.
    malek.stefan Posted messages 13 Status Member 1
     
    It's good, I solved my problem myself: you just need to buy a Behringer UCA202 sound card, connect one channel to it, and the other channel to the computer's jack, then finally connect the mixer's master to the amplifier, and that's it.
    ps: you can also use the Hercules console by only connecting the USB ;)
    1
    1. steve89 Posted messages 4 Status Member
       
      I have the same problem as you!
      So would I just need to buy that sound card? and some jack plugs?

      Thanks in advance
      0
    2. malek.stefan Posted messages 13 Status Member 1
       
      Hi Steve
      Recently I bought better than that! a Catre Son Audio 2 DJ from Native Instruments; it’s a thousand times better (you get two jack cables with it) and it costs 100 euros. Go for it ;)
      ps; use Traktor with it!
      0
    3. steve89 Posted messages 4 Status Member
       
      I already bought the MIDI keyboard before seeing your email, no problem :)
      but tell me, I don’t see how to hook up my PC with the table, because I connect the jack output from the table to the sound card and then the USB plug from the sound card to the PC but the sound comes out of the PC and not from the speakers connected to the table!
      That might seem complicated but the wiring is simple..
      Could you tell me every connection I need to make please?

      Thanks in advance
      0
    4. steve89 Posted messages 4 Status Member
       
      Aren't you using the USB port?
      0
    5. malek.stefan Posted messages 13 Status Member 1
       
      I’m using the USB port correctly … make sure you’ve connected two channels from the table to your sound card and then verify that the sound card driver is installed on your PC … then select your (external) sound card as the audio input in the mixing software you’re using … also I would recommend Traktor!
      ps; YouTube could also be of help for setting up the equipment! ;)
      0