PC to Sony Bravia TV issue "out of standard"

Hello,

I found a simple and unexplained solution to the Bravia problem that shows a black screen with "out of standard":

On the TV remote, press the "i-MANUAL" button, then the "RETURN" button, then the "i+" button.

That's it!

See you!

M@rc

Hi,
I jumped on my remote but it seems to be different :-(
I've been having this display issue since yesterday, it suddenly came up when everything had always worked really well before...
IMPOSSIBLE TO FIX THIS :-(

On the remote control. We can't change the photo here. So I will describe the one I see: Above the "digital/analog" button to the left of the "scene" button, below the "sync menu" button, there is the "i-manual" button. It is used to display the TV manual on the TV screen. On the button itself, there is a "?".

A+

M@rc

PC screen to TV

First, connect the powered television to the graphics card of the PC (s/VHS composite VGA plus audio) or HDMI
Classic method "Vista"
Control Panel; Appearance and Personalization; Personalization; Display Settings click on Screen 2; check extend the desktop to this display; set the resolution to the smaller of the two screens; apply
Second method (XP)
Go to Control Panel; double-click on the Control Panel of your graphics card (Nvidia or GeForce)
Configure multiple displays
Select: clone and if the TV is not detected, turn it on and restart the computer
Click on the link "my display is not listed"
Advanced display detection and if no television is detected click yes on the message and restart the PC
Retrieve audio signal: connect the audio cable to the headphone or SPDIF output (depending) of your sound card right-click on the volume icon in the Windows notification bar
and choose, Playback devices select the connected output and click on default
and restart the software to take the changes into account
To switch to all digital (see HDI HDMI)
Connect the television to the PC in the window select the type of display: mirror, extend or only on external screen check: enable presentation settings
PAL, SECAM 420p or 1080i?
See step 1 and go to your sound card in the section: change the HD signal or format of the driver select the type of connector you are using then click on the signal format that suits (e.g., THD1080x2) click apply to see the result and save the settings
For sound choose SPDIF as default

Also explained by CCM:
https://www.commentcamarche.net/faq/24-diffuser-la-video-de-l-ordinateur-sur-un-ecran-de-television