Suse10 driver ati
Fermé
Joey
-
13 déc. 2005 à 23:25
philtrain Messages postés 169 Date d'inscription lundi 7 novembre 2005 Statut Membre Dernière intervention 25 juillet 2010 - 16 déc. 2005 à 15:57
philtrain Messages postés 169 Date d'inscription lundi 7 novembre 2005 Statut Membre Dernière intervention 25 juillet 2010 - 16 déc. 2005 à 15:57
A voir également:
- Suse10 driver ati
- Realtek audio driver - Télécharger - Pilotes & Matériel
- Driver cloud - Télécharger - Pilotes & Matériel
- Tous les driver - Télécharger - Pilotes & Matériel
- Driver ati - Télécharger - Pilotes & Matériel
- Telecharger driver canon lbp 2900 - Télécharger - Pilotes & Matériel
15 réponses
mamiemando
Messages postés
33451
Date d'inscription
jeudi 12 mai 2005
Statut
Modérateur
Dernière intervention
6 janvier 2025
7 812
14 déc. 2005 à 00:56
14 déc. 2005 à 00:56
Normalement tu es sensé régénérer ton fichier /etc/X11/xorg.conf. Passe en root, fais en une sauvegarde au cas où, et tape :
Laisse toi guider et si tu as un doute consulte la sauvegarde que tu as faites de ce fichier (notamment pour les fréquences horizontales et verticales de l'écran), et dans le doute suis les réponses apr défaut (en majuscule).
Redémarre ton serveur x (serveur graphique) en appuyant sur ctrl alt backspace. Loggue toi en utilisateur en graphique, ouvre une console, et tape :
Si l'accélération 3d est active tu dois obtenir plusieurs milliers de FPS.
Bonne chance
fglrxconfig
Laisse toi guider et si tu as un doute consulte la sauvegarde que tu as faites de ce fichier (notamment pour les fréquences horizontales et verticales de l'écran), et dans le doute suis les réponses apr défaut (en majuscule).
Redémarre ton serveur x (serveur graphique) en appuyant sur ctrl alt backspace. Loggue toi en utilisateur en graphique, ouvre une console, et tape :
glxgears
Si l'accélération 3d est active tu dois obtenir plusieurs milliers de FPS.
Bonne chance
Bon, j'ai fait ce que tu m'a dis dans la console, j'ai répondu aux questions qui m'étaient posés, j'ai redémaré mon pc et j'ai fait le glxgears:
Je me tiens autour de 120.000 FPS
De plus, le 3d n'est toujours pas pris en charge.
Je ne comprends vraiment pas. Y'a surement qq chose que je ne fais pas bien quelque part.
Je me tiens autour de 120.000 FPS
De plus, le 3d n'est toujours pas pris en charge.
Je ne comprends vraiment pas. Y'a surement qq chose que je ne fais pas bien quelque part.
jipicy
Messages postés
40842
Date d'inscription
jeudi 28 août 2003
Statut
Modérateur
Dernière intervention
10 août 2020
4 897
14 déc. 2005 à 07:36
14 déc. 2005 à 07:36
Salut,
Affiche-nous ton fichier de conf (/etc/X11/xorg.conf), histoire qu'on y voit un peu mieux ;-))
Fais un tour là aussi : http://www.trustonme.net/categorie.php?id=39
http://lea-linux.org/cached/index/Hardware-hard_image-atifglrxrpm.html
Affiche-nous ton fichier de conf (/etc/X11/xorg.conf), histoire qu'on y voit un peu mieux ;-))
Fais un tour là aussi : http://www.trustonme.net/categorie.php?id=39
http://lea-linux.org/cached/index/Hardware-hard_image-atifglrxrpm.html
philtrain
Messages postés
169
Date d'inscription
lundi 7 novembre 2005
Statut
Membre
Dernière intervention
25 juillet 2010
73
14 déc. 2005 à 08:58
14 déc. 2005 à 08:58
Bonjour,
L'accélération 3D se configure sur Suse au moyen de l'utilitaire Sax2
Philippe.
L'accélération 3D se configure sur Suse au moyen de l'utilitaire Sax2
Philippe.
Vous n’avez pas trouvé la réponse que vous recherchez ?
Posez votre question
Salut:)
Voila mon fichier xorg.conf:
# File: xorg.conf
# File generated by fglrxconfig (C) ATI Technologies, a substitute for xf86config.
# Note by ATI: the below copyright notice is there for servicing possibly
# pending third party rights on the file format and the instance of this file.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# DRI Section
# **********************************************************************
Section "dri"
# Access to OpenGL ICD is allowed for all users:
Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
# Group 100 # users
# Mode 0660
EndSection
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
# This loads the GLX module
Load "glx" # libglx.a
Load "dri" # libdri.a
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
# FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
# FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc101"
Option "XkbLayout" "ca"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/input/mice"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Monitor0"
# === mode lines based on GTF ===
# VGA @ 100Hz
# Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
# SVGA @ 100Hz
# Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync
# XVGA @ 100Hz
# Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
# 1152x864 @ 60Hz
# Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync
# 1152x864 @ 85Hz
# Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync
# 1152x864 @ 100Hz
# Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync
# 1280x960 @ 75Hz
# Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync
# 1280x960 @ 100Hz
# Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017 +hsync +vsync
# SXGA @ 100Hz
# Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
# SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz
# Modeline "GDM-1950" 109.62 1280 1336 1472 1720 1024 1024 1026 1062 -hsync -vsync
# 1600x1000 @ 60Hz
# Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync
# 1600x1000 @ 75Hz
# Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync
# 1600x1000 @ 85Hz
# Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync
# 1600x1000 @ 100Hz
# Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync
# 1600x1024 @ 60Hz
# Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync
# 1600x1024 @ 75Hz
# Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync
# 1600x1024 @ 76Hz
# Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync
# 1600x1024 @ 85Hz
# Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync
# 1920x1080 @ 60Hz
# Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync
# 1920x1080 @ 75Hz
# Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync
# 1920x1200 @ 60Hz
# Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync
# 1920x1200 @ 75Hz
# Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 1400x1050 @ 60Hz M9 Laptop mode
# ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
# 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync
# 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# installed.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# === ATI device section ===
Section "Device"
Identifier "ATI Graphics Adapter"
Driver "fglrx"
# ### generic DRI settings ###
# === disable PnP Monitor ===
#Option "NoDDC"
# === disable/enable XAA/DRI ===
Option "no_accel" "no"
Option "no_dri" "no"
# === misc DRI settings ===
Option "mtrr" "off" # disable DRI mtrr mapper, driver has its own code for mtrr
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
Option "DesktopSetup" "(null)"
Option "ScreenOverlap" "0"
Option "GammaCorrectionI" "0x00000000"
Option "GammaCorrectionII" "0x00000000"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000000"
Option "CapabilitiesEx" "0x00000000"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
Option "OpenGLOverlay" "off"
# === Center Mode (Laptops only) ===
Option "CenterMode" "off"
# === Pseudo Color Visuals (8-bit visuals) ===
Option "PseudoColorVisuals" "off"
# === QBS Management ===
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
# === FSAA Management ===
Option "FSAAEnable" "no"
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
# === Misc Options ===
Option "UseFastTLS" "0"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "yes"
Option "ForceGenericCPU" "no"
BusID "PCI:1:0:0" # vendor=1002, device=4e45
Screen 0
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen0"
Device "ATI Graphics Adapter"
Monitor "Monitor0"
DefaultDepth 24
#Option "backingstore"
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0 # initial origin if mode is smaller than desktop
# Virtual 1280 1024
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Server Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.
Screen "Screen0"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
### EOF ###
Voila mon fichier xorg.conf:
# File: xorg.conf
# File generated by fglrxconfig (C) ATI Technologies, a substitute for xf86config.
# Note by ATI: the below copyright notice is there for servicing possibly
# pending third party rights on the file format and the instance of this file.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# DRI Section
# **********************************************************************
Section "dri"
# Access to OpenGL ICD is allowed for all users:
Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
# Group 100 # users
# Mode 0660
EndSection
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
# This loads the GLX module
Load "glx" # libglx.a
Load "dri" # libdri.a
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
# FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
# FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc101"
Option "XkbLayout" "ca"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/input/mice"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Monitor0"
# === mode lines based on GTF ===
# VGA @ 100Hz
# Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
# SVGA @ 100Hz
# Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync
# XVGA @ 100Hz
# Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
# 1152x864 @ 60Hz
# Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync
# 1152x864 @ 85Hz
# Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync
# 1152x864 @ 100Hz
# Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync
# 1280x960 @ 75Hz
# Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync
# 1280x960 @ 100Hz
# Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017 +hsync +vsync
# SXGA @ 100Hz
# Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
# SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz
# Modeline "GDM-1950" 109.62 1280 1336 1472 1720 1024 1024 1026 1062 -hsync -vsync
# 1600x1000 @ 60Hz
# Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync
# 1600x1000 @ 75Hz
# Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync
# 1600x1000 @ 85Hz
# Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync
# 1600x1000 @ 100Hz
# Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync
# 1600x1024 @ 60Hz
# Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync
# 1600x1024 @ 75Hz
# Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync
# 1600x1024 @ 76Hz
# Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync
# 1600x1024 @ 85Hz
# Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync
# 1920x1080 @ 60Hz
# Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync
# 1920x1080 @ 75Hz
# Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync
# 1920x1200 @ 60Hz
# Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync
# 1920x1200 @ 75Hz
# Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 1400x1050 @ 60Hz M9 Laptop mode
# ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
# 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync
# 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# installed.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# === ATI device section ===
Section "Device"
Identifier "ATI Graphics Adapter"
Driver "fglrx"
# ### generic DRI settings ###
# === disable PnP Monitor ===
#Option "NoDDC"
# === disable/enable XAA/DRI ===
Option "no_accel" "no"
Option "no_dri" "no"
# === misc DRI settings ===
Option "mtrr" "off" # disable DRI mtrr mapper, driver has its own code for mtrr
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
Option "DesktopSetup" "(null)"
Option "ScreenOverlap" "0"
Option "GammaCorrectionI" "0x00000000"
Option "GammaCorrectionII" "0x00000000"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000000"
Option "CapabilitiesEx" "0x00000000"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
Option "OpenGLOverlay" "off"
# === Center Mode (Laptops only) ===
Option "CenterMode" "off"
# === Pseudo Color Visuals (8-bit visuals) ===
Option "PseudoColorVisuals" "off"
# === QBS Management ===
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
# === FSAA Management ===
Option "FSAAEnable" "no"
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
# === Misc Options ===
Option "UseFastTLS" "0"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "yes"
Option "ForceGenericCPU" "no"
BusID "PCI:1:0:0" # vendor=1002, device=4e45
Screen 0
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen0"
Device "ATI Graphics Adapter"
Monitor "Monitor0"
DefaultDepth 24
#Option "backingstore"
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0 # initial origin if mode is smaller than desktop
# Virtual 1280 1024
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Server Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.
Screen "Screen0"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
### EOF ###
Oui j'ai essayé avec sax2 aussi, il m'ouvre une fenêtre de propriété d'écran et carte graphique, mais rien dans cette fenêtre pour configurer la 3D
philtrain
Messages postés
169
Date d'inscription
lundi 7 novembre 2005
Statut
Membre
Dernière intervention
25 juillet 2010
73
14 déc. 2005 à 20:46
14 déc. 2005 à 20:46
Avec Sax2:
La partie Bureau comprend:
- Ecran
- Carte graphique
- Couleurs/Résolution
- Résolution virtuelle
- Accélération 3D
- Géométrie
Philippe
La partie Bureau comprend:
- Ecran
- Carte graphique
- Couleurs/Résolution
- Résolution virtuelle
- Accélération 3D
- Géométrie
Philippe
joey
>
philtrain
Messages postés
169
Date d'inscription
lundi 7 novembre 2005
Statut
Membre
Dernière intervention
25 juillet 2010
14 déc. 2005 à 20:57
14 déc. 2005 à 20:57
Oui je sais de quoi tu parle, mais il n'y a pas ces options, par exemple, acceleration 3D, je la vois en bas de cette fenetre, mais elle est gris pale, je ne peux la changer malheureusement. j'ai l'impression que les drivers ne sont pas installé correctement, je crois que cest a cause de l'erreur que j'obtiens dans mes lignes de comandes, voici ce que j'ai écris dans mon dernier post, peut etre y voiras tu plus claire que moi hehehe:
Super, jai installé gcc sans probleme:) Maintenant ca fonctionne, jai installé le xorg 6.8 qui m'était demandé pour installer mon driver.
Maintenant, jai installé les driver en utilisant cette comande:
sh /home/noldhor/Documents/ati-driver-installer-8.20.8-i386.run
ca fonctionne, je vois la fenetre de Ati et je suis la démarche pour installer le driver, tout semble ok, je quite l'installation, tout semble correct.
Cependant, sur la page il me demande de faire un controle de l'installation: Rendez-vous ensuite dans le dossier /lib/modules/fglrx et verifiez que le fichier fglrx.ko a bien été généré.
ce n'est pas le cas, je ne le trouve pas du tout...
Alors, je vais dans /lib/modules/fglrx/build_mod et je fais ces commandes:
# sh make.sh
# cd ..
# sh make_install.sh
mais ca ne fonctionne pas, voici le message d'erreur:
linux:/lib/modules/fglrx/build_mod # sh make.sh
ATI module generator V 2.0
==========================
initializing...
kernel includes at /usr/src/linux/include not found or incomplete
file: /usr/src/linux/include/linux/version.h
Super, jai installé gcc sans probleme:) Maintenant ca fonctionne, jai installé le xorg 6.8 qui m'était demandé pour installer mon driver.
Maintenant, jai installé les driver en utilisant cette comande:
sh /home/noldhor/Documents/ati-driver-installer-8.20.8-i386.run
ca fonctionne, je vois la fenetre de Ati et je suis la démarche pour installer le driver, tout semble ok, je quite l'installation, tout semble correct.
Cependant, sur la page il me demande de faire un controle de l'installation: Rendez-vous ensuite dans le dossier /lib/modules/fglrx et verifiez que le fichier fglrx.ko a bien été généré.
ce n'est pas le cas, je ne le trouve pas du tout...
Alors, je vais dans /lib/modules/fglrx/build_mod et je fais ces commandes:
# sh make.sh
# cd ..
# sh make_install.sh
mais ca ne fonctionne pas, voici le message d'erreur:
linux:/lib/modules/fglrx/build_mod # sh make.sh
ATI module generator V 2.0
==========================
initializing...
kernel includes at /usr/src/linux/include not found or incomplete
file: /usr/src/linux/include/linux/version.h
Salut, j'ai suivis les indications de cet addresse:
http://lea-linux.org/cached/index/Hardware-hard_image-atifglrxrpm.html
Et après quelques lignes de comandes, je recois une erreur, voici ce que j'ai fais, l'erreur se situe en bas completement:
Je me demandais comment régler ce problème car je ne peux poursuivre correctement l'installation de mes drivers de ma radeon. Merci beaucoup!
linux:~ # uname -r
2.6.13-15.7-smp
linux:~ # ls -l /usr/src
total 0
drwxr-xr-x 6 root root 168 Dec 12 13:12 .
drwxr-xr-x 12 root root 344 Dec 10 17:14 ..
drwxr-xr-x 2 root root 128 Dec 14 13:09 ATI
drwxr-xr-x 3 root root 80 Dec 10 17:09 kernel-modules
drwxr-xr-x 3 root root 72 Dec 10 17:39 linux-2.6.13-15.7-obj
drwxr-xr-x 7 root root 168 Dec 10 17:16 packages
linux:~ # X -version
X Window System Version 6.8.2
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: SuSE Linux [ELF] SuSE
Current Operating System: Linux linux 2.6.13-15.7-smp #1 SMP Tue Nov 29 14:32:29 UTC 2005 i686
Build Date: 07 October 2005
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
linux:~ # rpm -Uh --force /home/noldhor/Documents/fglrx_6_8_0-8.20.8-1.i386.rpm
########################################### [100%]
########################################### [100%]
make.sh: line 40: gcc: command not found
make.sh: line 46: [: !=: unary operator expected
linux:~ #
http://lea-linux.org/cached/index/Hardware-hard_image-atifglrxrpm.html
Et après quelques lignes de comandes, je recois une erreur, voici ce que j'ai fais, l'erreur se situe en bas completement:
Je me demandais comment régler ce problème car je ne peux poursuivre correctement l'installation de mes drivers de ma radeon. Merci beaucoup!
linux:~ # uname -r
2.6.13-15.7-smp
linux:~ # ls -l /usr/src
total 0
drwxr-xr-x 6 root root 168 Dec 12 13:12 .
drwxr-xr-x 12 root root 344 Dec 10 17:14 ..
drwxr-xr-x 2 root root 128 Dec 14 13:09 ATI
drwxr-xr-x 3 root root 80 Dec 10 17:09 kernel-modules
drwxr-xr-x 3 root root 72 Dec 10 17:39 linux-2.6.13-15.7-obj
drwxr-xr-x 7 root root 168 Dec 10 17:16 packages
linux:~ # X -version
X Window System Version 6.8.2
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: SuSE Linux [ELF] SuSE
Current Operating System: Linux linux 2.6.13-15.7-smp #1 SMP Tue Nov 29 14:32:29 UTC 2005 i686
Build Date: 07 October 2005
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
linux:~ # rpm -Uh --force /home/noldhor/Documents/fglrx_6_8_0-8.20.8-1.i386.rpm
########################################### [100%]
########################################### [100%]
make.sh: line 40: gcc: command not found
make.sh: line 46: [: !=: unary operator expected
linux:~ #
mamiemando
Messages postés
33451
Date d'inscription
jeudi 12 mai 2005
Statut
Modérateur
Dernière intervention
6 janvier 2025
7 812
14 déc. 2005 à 19:44
14 déc. 2005 à 19:44
make.sh: line 40: gcc: command not found
Faut installer gcc :-)
Super, jai installé gcc sans probleme:) Maintenant ca fonctionne, jai installé le xorg 6.8 qui m'était demandé pour installer mon driver.
Maintenant, jai installé les driver en utilisant cette comande:
sh /home/noldhor/Documents/ati-driver-installer-8.20.8-i386.run
ca fonctionne, je vois la fenetre de Ati et je suis la démarche pour installer le driver, tout semble ok, je quite l'installation, tout semble correct.
Cependant, sur la page il me demande de faire un controle de l'installation: Rendez-vous ensuite dans le dossier /lib/modules/fglrx et verifiez que le fichier fglrx.ko a bien été généré.
ce n'est pas le cas, je ne le trouve pas du tout...
Alors, je vais dans /lib/modules/fglrx/build_mod et je fais ces commandes:
# sh make.sh
# cd ..
# sh make_install.sh
mais ca ne fonctionne pas, voici le message d'erreur:
linux:/lib/modules/fglrx/build_mod # sh make.sh
ATI module generator V 2.0
==========================
initializing...
kernel includes at /usr/src/linux/include not found or incomplete
file: /usr/src/linux/include/linux/version.h
Super, jai installé gcc sans probleme:) Maintenant ca fonctionne, jai installé le xorg 6.8 qui m'était demandé pour installer mon driver.
Maintenant, jai installé les driver en utilisant cette comande:
sh /home/noldhor/Documents/ati-driver-installer-8.20.8-i386.run
ca fonctionne, je vois la fenetre de Ati et je suis la démarche pour installer le driver, tout semble ok, je quite l'installation, tout semble correct.
Cependant, sur la page il me demande de faire un controle de l'installation: Rendez-vous ensuite dans le dossier /lib/modules/fglrx et verifiez que le fichier fglrx.ko a bien été généré.
ce n'est pas le cas, je ne le trouve pas du tout...
Alors, je vais dans /lib/modules/fglrx/build_mod et je fais ces commandes:
# sh make.sh
# cd ..
# sh make_install.sh
mais ca ne fonctionne pas, voici le message d'erreur:
linux:/lib/modules/fglrx/build_mod # sh make.sh
ATI module generator V 2.0
==========================
initializing...
kernel includes at /usr/src/linux/include not found or incomplete
file: /usr/src/linux/include/linux/version.h
Maintenant, jai installé les driver en utilisant cette comande:
sh /home/noldhor/Documents/ati-driver-installer-8.20.8-i386.run
ca fonctionne, je vois la fenetre de Ati et je suis la démarche pour installer le driver, tout semble ok, je quite l'installation, tout semble correct.
Cependant, sur la page il me demande de faire un controle de l'installation: Rendez-vous ensuite dans le dossier /lib/modules/fglrx et verifiez que le fichier fglrx.ko a bien été généré.
ce n'est pas le cas, je ne le trouve pas du tout...
Alors, je vais dans /lib/modules/fglrx/build_mod et je fais ces commandes:
# sh make.sh
# cd ..
# sh make_install.sh
mais ca ne fonctionne pas, voici le message d'erreur:
linux:/lib/modules/fglrx/build_mod # sh make.sh
ATI module generator V 2.0
==========================
initializing...
kernel includes at /usr/src/linux/include not found or incomplete
file: /usr/src/linux/include/linux/version.h
Super, jai installé gcc sans probleme:) Maintenant ca fonctionne, jai installé le xorg 6.8 qui m'était demandé pour installer mon driver.
Maintenant, jai installé les driver en utilisant cette comande:
sh /home/noldhor/Documents/ati-driver-installer-8.20.8-i386.run
ca fonctionne, je vois la fenetre de Ati et je suis la démarche pour installer le driver, tout semble ok, je quite l'installation, tout semble correct.
Cependant, sur la page il me demande de faire un controle de l'installation: Rendez-vous ensuite dans le dossier /lib/modules/fglrx et verifiez que le fichier fglrx.ko a bien été généré.
ce n'est pas le cas, je ne le trouve pas du tout...
Alors, je vais dans /lib/modules/fglrx/build_mod et je fais ces commandes:
# sh make.sh
# cd ..
# sh make_install.sh
mais ca ne fonctionne pas, voici le message d'erreur:
linux:/lib/modules/fglrx/build_mod # sh make.sh
ATI module generator V 2.0
==========================
initializing...
kernel includes at /usr/src/linux/include not found or incomplete
file: /usr/src/linux/include/linux/version.h
Opsss! désolé le message s'est dupliqué, jai du acrocher une touche hehehe:) Revoici le message, de facon plus claire j'espère:)
Super, jai installé gcc sans probleme:) Maintenant ca fonctionne, jai installé le xorg 6.8 qui m'était demandé pour installer mon driver.
Maintenant, jai installé les driver en utilisant cette comande:
sh /home/noldhor/Documents/ati-driver-installer-8.20.8-i386.run
ca fonctionne, je vois la fenetre de Ati et je suis la démarche pour installer le driver, tout semble ok, je quite l'installation, tout semble correct.
Cependant, sur la page il me demande de faire un controle de l'installation: Rendez-vous ensuite dans le dossier /lib/modules/fglrx et verifiez que le fichier fglrx.ko a bien été généré.
ce n'est pas le cas, je ne le trouve pas du tout...
Alors, je vais dans /lib/modules/fglrx/build_mod et je fais ces commandes:
# sh make.sh
# cd ..
# sh make_install.sh
mais ca ne fonctionne pas, voici le message d'erreur:
linux:/lib/modules/fglrx/build_mod # sh make.sh
ATI module generator V 2.0
==========================
initializing...
kernel includes at /usr/src/linux/include not found or incomplete
file: /usr/src/linux/include/linux/version.h
Super, jai installé gcc sans probleme:) Maintenant ca fonctionne, jai installé le xorg 6.8 qui m'était demandé pour installer mon driver.
Maintenant, jai installé les driver en utilisant cette comande:
sh /home/noldhor/Documents/ati-driver-installer-8.20.8-i386.run
ca fonctionne, je vois la fenetre de Ati et je suis la démarche pour installer le driver, tout semble ok, je quite l'installation, tout semble correct.
Cependant, sur la page il me demande de faire un controle de l'installation: Rendez-vous ensuite dans le dossier /lib/modules/fglrx et verifiez que le fichier fglrx.ko a bien été généré.
ce n'est pas le cas, je ne le trouve pas du tout...
Alors, je vais dans /lib/modules/fglrx/build_mod et je fais ces commandes:
# sh make.sh
# cd ..
# sh make_install.sh
mais ca ne fonctionne pas, voici le message d'erreur:
linux:/lib/modules/fglrx/build_mod # sh make.sh
ATI module generator V 2.0
==========================
initializing...
kernel includes at /usr/src/linux/include not found or incomplete
file: /usr/src/linux/include/linux/version.h
philtrain
Messages postés
169
Date d'inscription
lundi 7 novembre 2005
Statut
Membre
Dernière intervention
25 juillet 2010
73
14 déc. 2005 à 21:06
14 déc. 2005 à 21:06
Il faut créer un lien symbolique dans /usr/src:
par exemple (à adapter):
ln -s /usr/src/linux-2.6.11.7 linux/
Philippe.
par exemple (à adapter):
ln -s /usr/src/linux-2.6.11.7 linux/
Philippe.
Okay, j'ai effectué le lien symbolique, ca me dit que le lien a été créé et que le file exists.
Mais la après je me perds je crois, dois-je retourner dans mon dossier et refaire:
# sh make.sh
# cd ..
# sh make_install.sh
Si oui ca ne fonctionne pas, jai la même erreure.
Mais la après je me perds je crois, dois-je retourner dans mon dossier et refaire:
# sh make.sh
# cd ..
# sh make_install.sh
Si oui ca ne fonctionne pas, jai la même erreure.
mamiemando
Messages postés
33451
Date d'inscription
jeudi 12 mai 2005
Statut
Modérateur
Dernière intervention
6 janvier 2025
7 812
16 déc. 2005 à 00:05
16 déc. 2005 à 00:05
Je pense que tu n'as pas créé le lien dans le bon répertoire : en root :
car visiblement il ne trouve pas le fichier :
En particulier, il faut que tu vois (entre autres) version.h en tapant :
Bonne chance
cd /usr/src/linux ln -s /usr/src/linux-2.6.11.7 linux
car visiblement il ne trouve pas le fichier :
/usr/src/linux/include/linux/version.h
En particulier, il faut que tu vois (entre autres) version.h en tapant :
ls /usr/src/linux/include
Bonne chance
philtrain
Messages postés
169
Date d'inscription
lundi 7 novembre 2005
Statut
Membre
Dernière intervention
25 juillet 2010
73
16 déc. 2005 à 15:57
16 déc. 2005 à 15:57
Désolé, j'ai commis une erreur dans l'écriture du lien symbolique, voici la correction:
où il faut adapter linux-2.6.11.7 par le libellé exact du dossier
Philippe.
ln -s /usr/src/linux-2.6.11.7 /usr/src/linux
où il faut adapter linux-2.6.11.7 par le libellé exact du dossier
Philippe.
