RCA cable/Speaker cable

I already looked at Conrad this morning, and I only found stuff like this:

http://www.conrad.fr/fiches_rca_males_dorees_reperees_p_48674_49531_853206_790417_FAS

But we have to solder...

Hello
What do you want to connect?
Speakers to an amplifier?
What surprises me is the use of the RCA standard, which is rarely used for speakers.
In the US, they sometimes used - or rather: used to - this:
http://ecx.images-amazon.com/images/I/214TSAQ16SL._SL500_AA300_.jpg ???
(In this case, what would you want on the other end? bare wires? terminals?...)
Linux Mandriva 2010.0 Firefox 3.6.6

I could only see the last photo (the other links don't work).
But I believe we understood each other well.
Why not make these cords with male RCA plugs?
Linux Mandriva 2010.0 Firefox 3.6.6

I understood why the links are not working: you "stuck" punctuation on them without leaving the proper "space" on each side.
http://img594.imageshack.us/img594/3425/imag0002x.jpg
http://img293.imageshack.us/img293/1610/imag0003c.jpg
Linux Mandriva 2010.0 Firefox 3.6.6

Yes, I saw, I just corrected it

But you said: "Why not make these cords with male RCA plugs?"

How to do that?

Male RCA connectors cost a few cents. One must know how to solder without melting the plug and, of course, without creating a short circuit (but we can insulate the solder).
--
Linux Mandriva 2010.0 Firefox 3.6.6

First, I’m not saying that such cords don’t exist.
Try this very comprehensive mail order catalog (they're near my place):
https://www.conrad.fr/
I’ll let you search, it’s a real jungle...
Then, you can "sacrifice" an existing cord (for HP, of course)...
Or, if you have the means, here’s a shop, also near my place, that does custom work:
http://www.derotronic.net/down_for_maintenance.php
The two addresses I’m giving you are trustworthy, I’ve known the first one for 35 years (they had a different name) and the second for 15 years.
Linux Mandriva 2010.0 Firefox 3.6.6

Very well.
Last option: getting it done by a serious and equipped buddy. You really need to be careful about short circuits on speaker outputs.
The soldering isn’t fine, but a fairly thick gauge multistrand wire has to fit into a rather cramped space.
Linux Mandriva 2010.0 Firefox 3.6.6

"But how is it that this type of cable is impossible to find?"

"You buy an RCA cable, cut it, and strip it, it's as simple as that."

Yes, I want to connect a pair of Sony SS-SR55 Surround Speakers to my Sony MHC-7710D:
And I have to use RCA/speaker cable

If you want, I summarized all my issue here (with photos): https://forums.commentcamarche.net/forum/affich-18616400-probleme-rachat-de-cable-pour-sony-mhc-7710d#newanswer

Thank you in advance for your help.

Unfortunately, I do not have a soldering iron!

Is there no other solution?

There really is no other solution, because I really don't see who could do something like that for me!
And I don't really see how to connect my surround speakers any other way...

But how is it possible that this type of cable is impossible to find?

So, there!! I don't know. I'm an "old school" guy. There is a profusion of stuff that I am not. I have a good stereo system that is enough for me.
Note that in the 75/80s, it was a hassle too, but in a different way. Still with fewer "things."
Linux Mandriva 2010.0 Firefox 3.6.6

Well, the problem is that I'm not going to buy a soldering iron just to make one solder, that's not very reasonable!
I might ask Derotronic for a custom quote; but I hope it won't cost too much...

Attention:
If it's a cable for HP, yes. (1)
If it's a cable for amplified HP, no. (2)
The first carries currents of several amps. (1)
The second carries very low currents. (2)
I haven't had a good look yet.

I have to leave you, sorry.
I will check back on the site this afternoon.
Linux Mandriva 2010.0 Firefox 3.6.6

Okay, I'm still going to request a quote for custom cables, but if it's too expensive, I'll get some stripped cables instead:

But you told me that the 4 cables I showed you would work, but are there any that are better than others (because the price differences are huge) and should I get analog cables (https://www.materiel.net/) or digital ones (https://www.materiel.net/) or should I just go for the more expensive cables?

Up