View original (French)

Cannot make calls with my Logicom 250

valou7201 -  
 totson -
Hello, I bought a Logicom 250, I can receive calls but I can't make calls. Does anyone know the reason? Thank you.

Configuration: Windows XP / Internet Explorer 7.0

6 answers

  1. valou7201
     
    I have the tone when I press the phone key, it's a wireless phone, and then I dial my number, but even when I dial my number and then press the call key, it doesn't work, it rings busy, but the tone sounds normal. I hope you understand, it's not easy to explain. I will read your emails when I get home from work around 8:30 PM, thank you very much.
    7
  2. poupougne13 Posted messages 43203 Registration date   Status Member Last intervention   11 050
     
    Hello....

    What happens when you call...?
    On some phones, you dial the number first and then take the line, while on others, it's the opposite: you take the line first and at the end of dialing, the call is initiated....
    Best regards,
    @+

    "He who wants to climb a mountain begins at the bottom!"
    Signed: "Gillette" alias "nobody"! ;) (°!°)
    1
    1. totson
       
      I dial my phone number and then no sound; my calls do not get through.
      My Logicom Soly250 does not ring, I do not receive any calls, no tone;
      0
  3. valou7201
     
    Thank you very much for your information. I will take my phone to my sister's house to see if it works there. That's kind of you. I'll keep you updated. Bye.
    1
  4. valou7201
     
    Well, I pick up my phone, I hear the dial tone, I dial my number, and then it always rings busy. I'm with Alice Box and they told me my line was working fine, but I receive calls without a problem. Thank you for taking part in my issue, it's kind of you.
    0
  6. poupougne13 Posted messages 43203 Registration date   Status Member Last intervention   11 050
     
    Do you have the tone WITHOUT pressing a key or taking the line?

    --
    "Who wants to climb a mountain starts from the bottom!"
    Signed: "Gillette" alias "nobody"! ;) (°!°)
    0
  7. poupougne13 Posted messages 43203 Registration date   Status Member Last intervention   11 050
     
    I understand your response well; it is clear. However, I do not understand what is happening...
    You are connected to a box, I suppose... which operator?
    If it is a box, have you properly plugged the phone into the ANALOG socket of the box, and have you used a filter?
    I would advise you to take your phone to someone else and try it: it will narrow down the problem to either your phone or your installation (line, box...)
    Best regards,
    See you later

    "He who wants to climb a mountain begins at the bottom!"
    Signed: "Gillette" a.k.a. "nobody"! ;) (°!°)
    0