View original (French)

Analyse structurelle par robot professionnel 2010

kiminig -  
H@biba Posted messages 3 Status Member -
Hello,
I just installed "Autodesk Robot Structural Analysis" but it crashes on launch. The first window appears, then nothing. It's as if I hadn't done anything.
PS. I am on Vista Ultimate 32 bit, so the service pack
Any help is welcome
Configuration: Windows Vista / Safari 532.5

7 answers

  1. allouti
     
    I think you installed a 64 bit, you need a 32 bit
    hello
    5
  2. Newmark
     
    Hello,

    Try this manipulation:

    Delete the file "cascadeinfo.cas" located in the directory "C:\Documents and Settings\All Users\Application Data\Autodesk\AdLM" (or equivalent directory under Windows Vista).

    Then try to relaunch Robot Structural Analysis 2010. Normally, this should work.

    Regards.
    1
    1. kitikou
       
      Hello,
      I am working on Windows XP and I have the same issue as kiming. I followed your instructions but there is no file named "cascadeinfo.cas". Please, if you have any other suggestions, kindly send them to me.
      0
    2. Niry
       
      Hello,
      I tried R.S.A.P 2010 on Vista Ultimate and it's true that it doesn't work very well, it crashes on certain operations, I don't know why? Maybe it's not compatible with some versions of Vista????
      Then I tried it on XP Pro SP2 and SP3 and it works very, very well! There are no problems at all.
      0
  3. ben yahia
     
    I have the same problem, what is the solution but with Windows 7?
    0
    1. H@biba Posted messages 3 Status Member
       
      Hello, if you have found the solution, please display it!
      0
  4. kremo
     
    try installing it in compatibility mode for Windows Vista.
    it worked for me! however, I only have the demo version and I'm looking for its crack!
    do you have a solution for me?
    0
  6. aldr
     
    Help me please, if someone knows how to do it.
    0
  7. djingfort
     
    My friend, it's due to the serial number you used for the installation; it's incorrect. Use 000 000000 first, then during activation, you can use another number of your choice!

    DJINGFORT
    0
    1. pysof
       
      thank you I tried this
      it works well (y)
      0
  8. Franck NT
     
    I also had this problem on Windows 7. I solved it by installing Autodesk Concrete Building Structure from the same year.
    I hope it works for you too.
    0
    1. sarah
       
      Thank you, that's the right solution.
      0
    2. H@biba Posted messages 3 Status Member
       
      I tried but it doesn't work for me. If you have another solution, please let me know.
      0