Taille de bloc illégale

Bonjour a tous,avant d'ecrire ce post j'ai regarder s' il y avait déja la réponse à mon probleme mais non,alors je vous éxplique,lorsque je décide de graver un cd de donné sur cd rw avec nero à 42% ça plante et le message suivant s'affiche"la taille du bloc est illégale,impossible d'effectuer la commande disc at once ".Il y a 2 jours le S.A.V de boulanger est venu me changer le graveur et biensure avant de partir il a graver un cd devant moi et avec succé,alors je ne comprend pas,mon graveur est un LG HL-DT-ST DVDRAM GSA-4082b,je vien de mettre a jour le firmware,j'ai désinstaller nero et tous les autres logiciels de gravure de mon pc puis j'ai réinstaller nero6.13,j'ai aussi installer la derniere version des driver aspi,je formate entierement mes cd avant de graver,je vous écris le rapport de nero si ça peu aider:

Boomscud
Boomscud
1A23-0009-9030-2439-2688-2747

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 11:03:20
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c

Recorder: <HL-DT-ST DVDRAM GSA-4082B>Version: A208 - HA 1 TA 0 - 6.6.0.13
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <LITE-ON DVD SOHD-167T >Version: 9RS1 - HA 1 TA 1 - 6.6.0.13
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600BB-00GUA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST340016A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4082B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVD SOHD-167T atapi Port 1 ID 1 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d344prt Port 2 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d344prt Port 2 ID 1 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4082B F: CDRom0
LITE-ON DVD SOHD-167T H: CDRom1
Generic DVD-ROM L: CDRom2
Generic DVD-ROM J: CDRom3
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 144MB (148076kB)
Memory in use : 71 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

9.6.2005
CD-ROM (ISO)
10:50:18 #1 Text 0 File Isodoc.cpp, Line 6194
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

10:50:18 #2 Text 0 File Burncd.cpp, Line 2882
HL-DT-ST DVDRAM GSA-4082B
Protection contre les ruptures activés

10:50:18 #3 Text 0 File Reader.cpp, Line 127
Reader running

10:50:18 #4 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4082B running

10:50:18 #5 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

10:50:19 #6 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using CD-R/RW media

10:51:21 #7 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 358819 ( 79:46.19)

10:51:21 #8 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)

10:51:21 #9 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: HL-DT-ST DVDRAM GSA-4082B;
CDRW code: 00 97 25 30; OSJ entry from: INFODISC Technology Co., Ltd.
ATIP Data:
Special Info [hex] 1: D1 40 C6, 2: 61 19 1E (LI 97:25.30), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 02 4C D0, 2: 4A D8 5A, 3: 00 00 00 (invalid)

10:51:21 #10 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
This disc is not empty.
(Medium in drive: CD-RW. Medium required by compilation: CD-R/RW.)
Disc was erased successfully.
Accessing disc...
(Medium in drive: CD-RW. Medium required by compilation: CD-R/RW.)

10:51:21 #11 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 358820 (358820) = #358820/79:44.20
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 358820 blocks [HL-DT-ST DVDRAM GSA-4082B]
--------------------------------------------------------------

10:51:21 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [HL-DT-ST DVDRAM GSA-4082B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 735170560, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
358820 | lead-out | 1 | 0x41 | 0x00

10:51:21 #13 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

10:51:24 #14 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.

10:51:24 #15 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

10:51:24 #16 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (600 Ko/s)

10:51:24 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

10:51:24 #18 Text 0 File Mmc.cpp, Line 16691
StartDAO : CD-Text - Off

10:51:24 #19 Text 0 File Mmc.cpp, Line 21469
Set BUFE: Buffer underrun protection -> ON

10:51:24 #20 Text 0 File Mmc.cpp, Line 16978
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 4f 2e 14

10:51:40 #21 Text 0 File Cdrdrv.cpp, Line 1288
10:51:39.968 - HL-DT-ST DVDRAM GSA-4082B\H1 T0 : Queue again later

10:59:47 #22 SCSI -1040 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03E60000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x10
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x01 0xFA 0xA0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x10
0x34 0x0D 0x04 0x90 0x10 0x00

10:59:47 #23 CDR -1040 File Writer.cpp, Line 311
Illegal block size for command

10:59:47 #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

10:59:48 #25 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

10:59:48 #26 SCSI -1040 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x10
Sense Qual: 0x00
CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x10
0x34 0x0D 0x04 0x90 0x10 0x00

10:59:48 #27 CDR -1040 File WriterStatus.cpp, Line 167
Illegal block size for command

10:59:48 #28 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

10:59:48 #29 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (600 Ko/s)

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 17/07/2002 10:05:10
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 00:59:44 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Voila,le probleme est exposer et bien rédiger,j'espere que vous pourrais me venir en aide,sinon merci quand même d'avoir lu mon message.