View original (French)

Drivers for Magicolor 5430 DL printer

Emma Morgane -  
 rashel -
Hello,
I have a Konica Minolta Magicolor 5430 DL that works perfectly with XP, but not at all with Windows 7 ...
After downloading drivers from all the sites offering them, the printer is recognized by the system, but when I start printing, it goes into error and nothing works. For the system, there isn't any problem!
Can someone help me?
Thank you very much!
Configuration: Windows 7 Internet Explorer 8.0

4 answers

  1.
    strega27 Posted messages 1 Status Member
     
    Download this driver
    http://onyxftp.mykonicaminolta.com/download/SearchResults.aspx?productname=magicolor%205430dl
    0
  2. charlie64
     
    Good evening
    I also have a 5430dl with Windows 7 and Vista PCs, and it works very, very well
    What you need to do is connect it to the network and not via USB, then you need to use the IP address
    To find the IP address, go to the printer's network menu
    For example: 168.289.1.22 with that go to the control panel, click on the printer, and set the IP address.
    0
    1. rashelooo Posted messages 7 Registration date   Status Member Last intervention  
       
      Hello Charlie,
      I have the same issue as Emma and your solution only works on the network unfortunately.
      So I'm still looking for the driver for this printer for Windows 7 (connected via USB ;)).
      If anyone finds that, please post the link here :)
      0
  3. emma
     
    I confirm that it works for me and via USB!
    You need to download the VISTA file, mine is 64 bits.
    However, it sometimes crashes, but rarely; in that case, I change the USB port and it works again!
    Good luck
    Emma
    0
  4. rashel
     
    Hi Emma,

    "search for the 64-bit vista file" ok, but where? Because it is not on the Konica driver site or on the usual driver sites.
    Does anyone have a URL please?

    Thanks in advance.
    0