Unlocking Advanced BIOS Features

Hello,
I have news for you: "AwardBios is a trademark of Phoenix Technologies Ltd".
Now, since this hardware is still under warranty, I advise you to consult the technicians at Hewlett-Packard for your modifications.
All I would say is that before considering a BIOS flash, you should check:
- The available BIOS memory space.
- The codes, instruction stacks, etc... Already configured.
- The architectural differences between the MS-7093 and your board.

Ok, thanks, that’s what I was going to do (the technicians from Compaq/HP). However, I didn't know that Award is a.....'. I’ll go to bed a little less ignorant tonight LOL @+ and looking forward to it.

Hello,

I have the same problem as you (same motherboard, same BIOS, same HP computer actually), and I would like to know if you managed to modify your BIOS (or not).
If you succeeded:
- which BIOS did you use instead
- where to find it
- how to modify it (if complex)
- ...

Thank you.

Hello Deverdeb,
So you want to modify a BIOS, just because you think it interferes with your graphics card settings???
No relation, BIOS modifications can only improve the following points:
-Overclocking: Speed of data processing and transfer by forcing the addressing of certain chips.
-Support for certain peripherals or reported circuit sets (example: Emulation circuits supporting game console CDs), realignment or refinement of addressing, etc...
So the only point of influence on the graphics card is at the level of the power control circuit of the graphics card, and the pre-memory buffer (AGP), through the North bridge chip.
Your problem lies between the screen and the graphics card, the BIOS has nothing to do with this:
-Gamma
-Brightness
-Contrast
-Shader
-Anisotropic filtering or anti-aliasing
-If the screen is an LCD: Excessive exposure to an external heat source affects the stability of the panel components.
So check the advanced settings of your graphics card, update your drivers.
If you still want to overclock:
-Get an electronic analysis software, check the addressing codes already installed in the BIOS, and the available memory space on the EEPROM. Analyze the structure of your motherboard's circuits, then play with your "force address at". Note: I disclaim all responsibility in case of error, so get yourself a pair of tweezers and a UV lamp to fix your mistakes on the BIOS chip.
Note: If the APM circuits are present, it is more than certain that a technician has set the automatic FSB adjustment in ROM memory, without any real advanced parameter connection on the BIOS, to close the risks of overclocking.

Well,
So you downloaded the latest BIOS, but the graphics card is a Xsabre 300, and you're wondering why it doesn't appreciate the change.
You never thought that this graphics card, being entry-level from ATI, might have its flaws exposed by the improvements in PCI and AGP support.
Notes: For the Audigy sound card, you have a built-in sound card initially; if you forget to disable it completely, the drivers will look for the Audigy at the address provided by the BIOS, which is that of the integrated card.
Distraction, distraction...

I also have a Compaq with an MSI 7093 motherboard, I recovered the new BIOS from MSI, the version is
"BIOS Award W7093AMS V3.9 021306 12:13:04"
I flashed the BIOS with the MSI, there are some settings to improve performance, but no FSB settings. And for overclocking the processor, there is a compatible software for PLL ICS 951412, which is ClockGen, with which my AMD 64 2000 MHz runs at 2290 MHz.
By flashing the BIOS with that of MSI, XP or Vista will no longer be activated automatically in the case of OEM versions.

Je suis désolé, mais je ne peux pas vous aider avec ça.

I'm looking to deploy a motherboard for an IBM ThinkPad R50e with a parallel port.
If you know of any solutions, please help me.