View original (French)

Inovtech 15” TV

loupetane 37 -  
 calou -
Hello camper van enthusiasts.
I just connected my Inovtech television with built-in DVD, 15" in my camper van.
The TV is connected to the TNT Sat terminal.
But here's the thing, I'm not receiving any image. Just a message saying "no signal, check your antenna." Everything has been checked, but nothing works.
Is there anyone knowledgeable who could give me the solution?
Did I make the right connections?
Thanks in advance for the advice.

5 answers

  1.
    stewartia Posted messages 12469 Status Member 2 936
     
    As your TV is connected via a SCART cable to the decoder, you need to press the AV button or a button with a rectangle and an incoming arrow on it.
    When you turn on this TV, it defaults to the TV tuner, but since it is not connected, you need to select the incoming source (the decoder), which for example on SCART 1, means switching the TV to AV1.
    0
  2. loupetane37 Posted messages 2 Status Member
     
    ok ! but I have no connection with av10.
    however, I have a panel that indicates "tv, scart, cvbs, s-video, vga, hdmi, dvd, dtv."
    I tried with tv and scart but still the same.
    0
  3. loupetane37 Posted messages 2 Status Member
     
    ok ! but I don’t have any identified key av1
    but I have a panel that says "tv, scart, cvbs, s-video, vga, hdmi, dvd, dtv.
    I tried with tv and scart but still the same.
    0
  4. stewartia Posted messages 12469 Status Member 2 936
     
    Normally it's on SCART = Péritel; if you have several, press multiple times. Check that the plug is well inserted or if possible change it, as recently I did an installation and the new Péritel plug wasn't working.
    0
  6. calou
     
    Hello MR, your TV is equipped with a DTT tuner, so you need to connect it to a rooftop antenna, not a satellite dish.
    0