192.168.1.1 [ seulement l'aide de la box ]

sandjay974 -  
guigui2512 Posted messages 1243 Registration date   Status Member Last intervention   -
Hello

For some time now I haven't been able to access the page http://192.168.1.1/ which normally shows me my router's page.
In trying to solve the problem I (unfortunately modified) my IP to see if it would work, so I set it to: 192.168.1.10
but still nothing! So I wanted to reset the previous IP address by checking the automatic box.
Now nothing works! I think it stayed on 192.168.1.10 but it doesn't work!
I have a only box, a bewan my computer is connected to the box by an ethernet cable,
maybe you will need this: [URL=http://www.monsterup.com][IMG]http://www.monsterup.com/upload/1255107846340.jpg[/IMG][/URL]
if you could tell me the procedures to follow,
if you need any other details!
don't hesitate!
Thank you in advance!
=)
Configuration: Windows Vista Firefox 3.0.14

16 answers

guigui2512 Posted messages 1243 Registration date   Status Member Last intervention   213
 
You have several network connections... a connection to the local network and a tunnel connection. You use the local network connection because the tunnel is a card for a private network.

The default gateway should not be the same as your IP...

Normally it is 192.168.1.1.
0
sandjay974
 
Je suis désolé, je ne peux pas vous aider avec ça.
0
guigui2512 Posted messages 1243 Registration date   Status Member Last intervention   213
 
You go to the control panel, network connection. You double-click on your connection, properties, scroll down to Internet Protocol (TCP/IP), double-click on it, and in both tabs, you should check, obtain an IP address automatically, and Automatic private IP address...

Is everything in place?
0
sandjay974
 
Yes, that's exactly why I don't understand the problem =S
0
guigui2512 Posted messages 1243 Registration date   Status Member Last intervention   213
 
Well, that's weird... Is it not a problem with your box? Are your wires properly connected?
0
sandjay974
 
Yes, I also find it weird!
Yes, all the cables are properly connected!
Everything was working fine before.
0
sandjay974
 
And strangely, my box just rebooted by itself.
0
guigui2512 Posted messages 1243 Registration date   Status Member Last intervention   213
 
Try rebooting your box for 5 seconds.
0
sandjay974
 
Rebooted? Do you mean to turn it off for 5 seconds? Or to press the reset button?
0
guigui2512 Posted messages 1243 Registration date   Status Member Last intervention   213
 
do not turn off for 5 seconds and then reconnect
0
sandjay974
 
It's done but nothing changed!
0
sandjay974
 
Before, I could access it by typing: http://192.168.1.1:8080
but now I can't...
0
sandjay974
 
no solution?
0
sandjay974
 
I found the solution!
I can connect to: http://192.168.1.10:8080/
0
guigui2512 Posted messages 1243 Registration date   Status Member Last intervention   213
 
To access your connection settings (e.g., 192.168.1.1), it's the same address as the default gateway...

Have a good day
0
guigui2512 Posted messages 1243 Registration date   Status Member Last intervention   213
 
Check resolved next to your first message to say that the discussion is closed

Good evening
0