support proposé : samsung sh-893 Solved

Question

Hello,  Since I struggled a lot and now I think I really have a good grasp of the thing, I offer you a bit of help for using this DVD recorder whose manual is completely incomprehensible even though it's so easy to use!  Good luck!

DOMI5940 · Accepted Answer

Hi, I have the same Samsung SH-893 device as you, and I can't replay the programs stored on the hard drive. Every time I press LIST, LIBRARY/TITLE, a message appears: This message is:  DATA SYSTEM TRANSFER FAILURE  PLEASE TRY AGAIN AFTER TURNING OFF THE POWER.   What should I do? I'm completely lost   Thank you in advance

FM · Answer

Hello it would be nice to have some help because I just bought this device but it’s very complicated! After trying to record using the timer function, it doesn't display anything. I get messages like load-setup returning to the clock on the DVD recorder but there’s no grid on the Samsung TV to access the recording.

npb · Answer

I didn't quite understand where your problem was situated. Here are some clarifications:  There are 2 ways to program a delayed recording:  - either through the program guide (the channels recognized by the DVD and correctly captured, or the free TNT captured) in this case, go to MENU/GUIDE, select the program and record. A small red clock appears. The programs recorded this way are visible in "recording by minute," recorded list.  - or through programming go to MENU/RECORDING by Minute/, enter the first line, fill in the fields and confirm Be careful: only the captured channels can be recorded. If you want to record a channel from a decoder, select AV (for me it's AV2) and don't forget to also program the decoder to switch to the right channel at the specified time. The programs recorded this way are visible in "recording by minute," scheduled list.  IN BOTH CASES, you must not forget to TURN OFF THE DEVICE COMPLETELY otherwise it will not record!  If this did not resolve your issue, try to be clearer about what you are struggling to do.

npb · Answer

I have Canal+/Canasat and the sound is very good.  Keep checking the audio options, your problem likely comes from a bad setting (look at DGS, Dolby, etc...) It would be helpful to check right away if it’s not the SCART connection by trying another one.  You should also be able to control the free TNT channels via the recorder. Did you do the auto search?

FM · Answer

I also have the channels via the DVD  but to access Canal + I need to use the Canal + decoder channel  I disabled Dolby which slightly reduced the background noise then in the sound menu of the Samsung TV by adjusting the equalizer myself but still, I have to turn up the volume all the way and I also adjusted the volume of the decoder  but it's true that professionals are more accustomed to it and they know exactly what level it should be at to get the best sound

FM · Answer

The troubles are over....  thank you again for your help

apache · Answer

Hello, Thank you already for this offer, because this notice is totally incomprehensible! Here is my problem: I can't set up the channels on the player/recorder; I have the Alice box, so I connected it as shown in the diagram "connect to an external device (VCR or satellite receiver)." But I have tried several times to do the auto scan and nothing happens, the player/recorder detects nothing... Just a small clarification: I don't have a wall socket for the antenna, my only way to access TV channels is through the Alice box. Thanks in advance!

npb · Answer

Hi,   It's normal that it doesn't detect the channels via the Alice box. It can only detect the channels through its TNT tuner. So, at home, it doesn't detect certain multiplexes, and therefore, it doesn't have France 2, for example, which I have to record on AV and not directly on the DVD tuner.  For the rest, I think it's like with the CanalSat decoder. To watch via the player (I don't know what that's for), you need to select AV2 (maybe AV1 or 3 depending on the connection) by pressing the source button, and change the channels on the Alice box as you did before. To record, select AVn° as the channel and program the box as well.  I hope I have helped you.

apache · Answer

Okay, noted! Thank you for your help and the quick response!

Anne31 · Answer

Hello,  I just bought this device and I can't adjust the channels of the channels. I connected the player with an HDMI cable to my SONY LCD TV KDL40W5500. The device works because I can play DVDs, but I can't record the TV.  If anyone has a tip or has encountered this problem before? Thank you very much

edja · Answer

Hello, I would like to ask for your help because I connected my new device without too much trouble, but I am surprised that I can only record the channel I am watching. Is this normal, or is there an additional connection I need to make? Thank you in advance for your help.

npb · Answer

the answer is in message n°2

npb · Answer

Indeed, there is no dual tuner, so you cannot record from the decoder and watch another channel from the decoder at the same time (that's what the paid option "recording" from CanalSat is for, for example).  However, for certain channels, you can work around the issue:  - record the decoder by setting the recording to AV, then on the TV, watch through the TNT source or TV of the TV  - record the TNT detected by the DVD and watch the decoder normally  I hope I was clear enough.

Cathie · Answer

Hello, I also bought a Samsung SH-893. The seller told me that I could record a show and start watching that recording while the hard drive continued to record, but I can't find this function in the manual. If anyone could help me, thank you in advance.

npb · Answer

p78 of the manual for a direct or scheduled recording Just go to menu/title/choose the program currently being recorded (recording) and confirm or play as for any recording; the STOP button only stops playback  (or timeshift function p79 on the remote control timeshift button (if I understood correctly, it's a kind of 30-minute buffer) The difference with the normal REC recording is so subtle that it escaped me...)  Overall, using this device is very intuitive. When you're trying to do something, be as logical as possible and you'll find the solution very simply just like it was the case here!  also remember to read note p79, on the possible formats for simultaneous playback with a recording, I missed it on the first read.

npb · Answer

A Anne 31  For issues with simultaneous playback with recording: see compatibility p79  It is said that you can read a DVD (understanding vob files) or directly from the hard drive but not divx while recording at the same time.  If you try to read a divX burned on a DVD, you cannot, according to the manual, record at the same time on the hard drive.  However, you can read a divX from the hard drive and record on DVD at the same time.  So the trick is to always have a DVD + RW on hand and to do the necessary operations!  I hope I have helped you.  P.S.: I never use DVDs but a USB stick (no burning required, just drag and drop on the PC). I will soon test the playback of a divX on USB while recording from the TV on the hard drive. I will let you know if it worked.

Germain72 · Answer

Hello, I just finished installing the DVD player but in TV mode, I can't change the channel. To do that, I have to go into the menu and then the channel list. I can't do it using the PR+ / PR- buttons.  How can I change them?  Thank you

luis · Answer

Hello, The transfer/reading/recording with a USB key works very well. But it's impossible with my external hard drive (Western Digital My Passport, not to name it) which is not recognized (USB NOT CONNECTED). Is there a way to update the drivers for the Samsung? Thank you.

npb · Answer

A Germain ...  Weird.. but what's the point of watching TV through the recorder?  A Luis  I did an update thanks to a file on the Samsung site. You have to burn the file onto a disc and insert it. The USB key update doesn’t work.

noguy · Answer

Hello again,  I have some sort of understanding issue and I'm going to try it tonight, but is it really not possible to record (or rather my recording is already scheduled) while watching a DVD???  Actually, I've set a delayed recording for 9:00 PM and I just want to watch a DVD in the meantime....  Thanks.

npb · Answer

1) I haven't looked at the different qualities yet.  2) Remember to read the note on p79 about the possible formats for simultaneous reading with a recording; I missed it on the first reading.

npb · Answer

To Luis,  Have you tried changing the USB cable? The manual states that a slightly damaged cable can hinder the recognition of the USB device.  To Noguy and Morfalou 17  Regarding the recording quality in manual programming, I have no problem selecting it....I modify it with the up and down arrows, just like selecting the channel... If you use DVB automatic programming, you cannot choose the quality. It automatically defaults to FR (flexible recording = Flexible Recording), see p81 footnote  To Morfalou17,  No lies from Samsung (but I admit they do confuse us well!!), you can only transfer from HDD to USB JPEG, MP3, and DivX files (see p13). TV recordings are not part of this, so it's not possible. The recording section of the manual only mentions transfers to HDD or DVD as well.  My article did not clarify this, I will update it gradually based on my tests to make it clear.  As for the seller, I think he was mistaken in good faith and reasonably assumed that all transfers were possible.  Besides, I believed it too, but...  It's the same for simultaneous playback and recording: not all combinations are possible. Example: play a TV recording on HDD and record TV on HDD at the same time: possible play a DivX from HDD or USB and record on HDD at the same time: not possible play a DivX from HDD (USB not tested) and record on DVD at the same time: possible  BUT, in message 21, Luis says he transferred to USB.....it would be good for him to join the discussion because since it's impossible, he must have made a mistake or misspoken... ;-)

Marc69 · Answer

Hello, I've had the sh-893 since yesterday. I struggled a bit to connect my external hard drive via USB due to it being formatted in NTFS rather than FAT32. That problem is sorted, but I have a quick question. Is there a way to read vob files from this external hard drive via the USB connection? It only reads divx. Do I need to transfer the vob files to the internal hard drive?  Thanks in advance

npb · Answer

I didn't try to read the vob files directly, neither via USB nor through the hard drive because I think it's not possible. However, with Nero, after creating a DVD from these files, there was obviously no problem.

jma22 · Answer

Hello,  I got the Samsung SH-893 yesterday. Everything is fine, except for Timeshift. Indeed, when I try to use it while watching CanalSat (av2), it doesn't work, whereas it works perfectly with the TNT channels on the SH-893. Is this normal? Have you noticed this issue in your setup? Thank you

Carhat · Answer

Hello, I also have a problem with this player. I wanted to record the VHS onto DVD. So far, so good. However, the finished DVD is unreadable on any other device: PC, standard DVD player, Xbox360. Only the SH893 can read it, and even then, one of the finalized DVDs cannot even be read by this same player. HELP!!

Carhat · Answer

I used regular DVDs on the PC and it even crashes. Do I need to activate or deactivate the V-Mode or something else to make this damn DVD play everywhere?

laetarel · Answer

Hello, I also have an issue with my Samsung SH893. I schedule a recording on the hard drive and it works. The problem occurs during playback: when I try to view my recordings via menu<library<title, the page displays for 1 second (but I have time to see that my recordings worked) and then it disappears and it goes back to the channel I was watching before. The same happens whether I go through Disc menu or Title menu. So I can't watch my successful recordings, and I'm starting to pull my hair out... Please help me Thank you.

noguy · Answer

Thank you for your help npb...  However, I find it unreasonable to sell a device with integrated TNT and not be able to use all the features of the device to their full potential....  It's such a shame....  A quick question, but the test will be running starting tonight: I'm going to try to make 2 recordings at the same time... Has anyone tried it before??

jma22 · Answer

When I watch a canalsat channel (av2), (canalsat => scart => [/contents/unix/unix-shell.php3 sh]-893 => scart => TV), the [/contents/video/affich.php3 image] is much less sharp than when I watch canalsat via TV. How is it at your place? Would the image be sharper if I install an HDMI socket (canalsat => scart => sh-893 => HDMI => TV)? It's a pity that sh-893 doesn't have an HDMI input.

Stéph · Answer

Hello npb, I don't know if you still respond to questions, maybe someone else will have an answer, but I'm giving it a try anyway ^^  My setup consists of the following elements: Orange satellite decoder on AVv2 of the SH893 SCART AV1 from the SH893 to AV1 of the TV Antenna cable, digital signal only (no analog channels received or very poor quality) connected to "input from antenna socket" (output 9 from the manual to the non-connected television, apparently it doesn't do anything if there are no analog channels)  When I cycle through the different sources on the SH-893 I do receive TNT on DVB-T (PR Number), nothing on DV and AV3 is normal The satellite channels on AV2 But on AV1, I have no signal? Can you tell me why?  When I turn off the SH893, I no longer receive anything on AV1 of the TV, is that normal? In TV mode on the SH893, I only receive the AV2 signal In summary, I cannot watch TNT channels if the SH893 is off I read your message that to start a recording, the SH893 must be off, so I can't watch TV if I want to start a program.  I don't know if I was clear However, all your clarifications will be welcome Thank you in advance

Mathbzh · Answer

Hello everyone,  I have a little problem. I just got the recorder, I programmed it, etc. When I want to make a delayed recording, I set everything up, but at the moment of recording, the little clock blinks and... I have nothing recorded, I don't know why. Does anyone know why?

audrey--29 · Answer

Hello, I really think I'm not good at this.. I bought a Samsung SH893 DVD recorder yesterday.. and .. I can't seem to do anything I first did all the initial settings without too many problems. Now, when I get to page 56.. I can't even play a disc: when I press the OPEN/CLOSE button, whether on the remote or in most cases, absolutely nothing happens (except my player shows OPEN) or in some cases it displays LOAD and a "no disc" message...  If you could help me, Thank you in advance!

scalaire57 · Answer

Hello everyone,  I have a problem:  I have a recording that was stopped due to a mistake on my part; since then in "my library" "my tracks" I have a file named "RECOVERY" that I can't delete, every time I try it tells me: "no track list found"! Does anyone have any idea?

scalaire57970 · Answer

Hello everyone, I have a small problem with my sh-893:  Following an accidental stop of a current recording, in "MY LIBRARY" "MY TITLES" I have a folder called "RECOVERY", I can't delete this file, every time it says: "no title list found"! Can you help me? Thank you Francis

scalaire57970 · Answer

First of all, sorry for posting the same message here 3 times! Username error!  New question:  Last night I recorded a TV movie======> perfect DVD, but I can't play it on another DVD player or even on my PC! Is that normal???

CAMJEZA · Answer

Hello npb I bought a Samsung SH893 recorder and I'm having some issues using it:  - I have a Canal+/satellite decoder with a satellite dish (no VHS/TNT antenna). The cable coming in is a screw cable that connects to the decoder. However, I need to connect the antenna to the Samsung recorder. - Is it true that you cannot record satellite channels like Canal+? - Is it true that you can only record TNT channels? - It's a mess with the Anynet function (I also have a Samsung HD TV compatible with Anynet). Which one controls? The TV remote or the recorder remote? The TV remote is less advanced than the recorder remote?  Looking forward to hearing from you Thanks in advance

CAMJEZA · Answer

thank you npb I did a manipulation:  - bought a satellite antenna/coaxial adapter and connected my satellite antenna to the Samsung SH893 HD recorder. - Now the recorder does not recognize the satellite channels. - I will therefore follow your advice and buy an indoor TNT antenna  See you and thanks again

npb · Answer

- The recorder does not recognize satellite channels.   Be careful, it will never do that! It only recognizes the channels it can receive by itself.   I repeat: we watch CanalSat on the TV like before (by connecting the satellite antenna to the decoder)  and when we want to record CanalSat, we set it to AV2 on the DVD, select the channel on the decoder (or program it) and watch another channel on the TV (I forgot to mention that you need a TV with TNT, which you normally have with your HD TV)   You have to juggle the sources on the DVD and the TV, it's a bit hard the first few days, but afterwards, we get it, it works!

Anonymous user · Answer

Hello,  I have two problems:  - 1/ I can't create chapters even though the chapter creation is supposed to work (page 49 of the user manual). I want to specify that I only record digitally, no analog channels.  - 2/ My recent Samsung TV connected to the recorder turns on by itself every morning at 8 AM while the recorder itself does not turn on. Before the installation of the recorder, this did not happen.  Thank you for your responses.

mimi94320 · Answer

Hello.  I just purchased a Samsung 46B6000 TV. I would like to buy this DVD recorder, but I have a doubt first. Is it possible to record one channel while watching another?  Thank you in advance.

Eric · Answer

Hello,  I just read all the topics but found no answers to my issue:  I recorded a 3h50 movie last night on the hard drive of the sh893, and I want to copy it to a DVD, but every time it says "copy impossible, insufficient space."  I recorded it in XP on the hard drive, and I want to copy it in LP to the DVD (which should allow for 4 hours of recording). Is this possible? (without splitting it into multiple parts, of course)  I'm lost here!  Thanks in advance and happy holidays!

spirou145 · Answer

Hello everyone like you, I bought this recorder I read your messages but I don't think I found a solution for my case I recently subscribed to Canal + TNT xxx I want to connect it and record (even if it's just live viewing, so be it) I have a Panasonic plasma screen and for now my setup is Canal + connected to the TV via HDMI recorder also connected to the TV via HDMI and collective antenna: connected to the input of Canal +, output to the recorder and output to the TV  I tried dozens of times to connect everything via SCART ............I have pulled my hair out, I don't know what connections to make. The player tells me every time that the channel is scrambled and a small euro appears in the list of channels on the recorder.  I don't know what to do, please help me I don't know if I'm connecting everything correctly I did a lot of searches for digital channels and I always get the same message!   thank you all

spirou145 · Answer

Hello again  I received a clear response from Samsung's customer service and my connections are working  I regret the fact that I have to stay on channel 2 to record the viewed channel   However, does anyone have a solution for the Canal + sn problem?

tibolafaute · Answer

Hello,  I just bought this player for my mother. I chose it for one essential feature: time-shifting. (to answer the phone among other things)  I am surprised by the complexity of using the time shift: Press: - 1: the HDD button - 2: press time-shift (to activate the live control function) - 3: select 'on' with the arrows. - 4: press 'ok' - 5: hit pause.  By the time I do all this, the phone has stopped ringing... especially for my mother!  I am used to using TNT players/decoders with live control function (9 HDD decoder, Club-internet decoder, HDD Phillips recorder): you can just hit 'pause' during a show to trigger the system.  Is this function accessible directly with a single button? Do I have other options?  Thanks for your answers.

cat70 · Answer

Until now, to read my TV recordings, I would go to menu, library, title, then select. But since yesterday, I don't have time to select as the list of titles disappears immediately. What should I do?

isa541 · Answer

Hello, I have a Samsung SH-893 and I can't install the channels on the DVD, so I have a recording issue. I have a Philips television (cathode ray tube). Can someone help me...? Thank you  Isa

FABRIZIO · Answer

I would like to know how to read a DVD format folder (movie folder = audio_ts folder, video_ts) from the USB port?? I copied a DVD movie to my external hard drive, and I can't access it. When I'm in the hard drive through the USB port, I go to "libraries - title" and it says no titles found.

ag13 · Answer

When I schedule a recording in the "scheduled list," I can't play it. I mean, I can't find it... It no longer appears in the "scheduled list," nor does it show up in the "recorded list," or in the "library."  I should specify that my player is connected to the TV via an HDMI cable and that my Numericable decoder is connected to the TV and the player via a SCART plug.  I don't understand what is not working; your help would be welcome.

rodoudou · Answer

Hello! I just bought this home recorder, everything is connected to my setup as follows: Samsung LCD TV + TNT-SAT decoder (no antenna) and the recorder  The decoder is connected to AV2 of the recorder via SCART, then the HDMI from the recorder is connected to the TV. I didn't have a TNT-SAT, so I put the SCART between the recorder and the TV, and now when it's off, I can see the TNT channel from the decoder. But I have a problem on how to switch to AV2 on the recorder in order to record a TNT channel while watching something else on my TV (without TNT), I don't understand! I'm not clueless, but here... If I press source, it changes the source of my TV and not the recorder. If I turn off the recorder and turn on the decoder, I can see the channel from it, but I can't start a recording. I find the manual not very clear on this point, or at least it's not that simple.  Thank you in advance!   *Oh! Another question, why is the image and sound different between receiving through the recorder or just through my TV? Let me explain, from the TV I only have the 6 channels (satellite) and I have a slight noise which I don't know what it's from... (the depths of the galaxy lol) but through the recorder, it's worse! It's more high-pitched and the image is clearer too.

rodoudou · Answer

Hey!  Damn, I just found out! I need to press the TV/DVD button to select the one I control, and then only once I'm on DVD, press source to set it to AV2. (It's not quite explained this way in the manual)   Uh, silly question, can I schedule a recording at the times I want and select source AV2? (Well yeah, I will only be recording from AV2 (TNTsat decoder) because without it, it's not great.)  And I can't display the guide (TV program) on the recorder, only on my TV I can!

excalibur46 · Answer

Hello  I have a recording duration problem for broadcasting on DVD for digital channels Indeed, for this type of channel, the quality automatically sets to FR so as to supposedly adjust best according to the size of the media  However, for recordings of shows like series where there are several episodes in a row (approx. 2h50), I never get the end because the device chooses a quality that does not allow fitting on a DVD  It’s as if it calculates the quality only based on the first episode, resulting in not enough space for the rest I do not schedule the recording via the guide but manually, but the device still must take some information at the beginning of the recording regardless of the programmed recording duration  I called customer service who couldn't provide a solution.........................  I’m fed up with this recorder with its huge mechanical noises and its incredibly long initialization time, unadjustable copy quality on DVD, etc., etc.  I compare it to my previous Sony and there’s no comparison!!

clydeb62 · Answer

Hello, well I have another type of problem. First of all, thank you for all the help with this player because indeed the manual is completely incomprehensible.  I am recording directly onto Memorex DVD+RW, and when I try to play them on another DVD player, the image is all choppy and so is the sound??? I thought it might be due to the type of recording like in the past with VHS recordings SP (standard play) or LP (long play), but I can't figure out how to adjust this setting on my recorder. Has anyone else had this problem or could help me?  Thanks in advance.

beb · Answer

Hello,  I just bought this model of recorder and I have a problem. I have a Canalsat decoder that I connected to the recorder, and for the channels that I pay for, such as Canal+ or TF6, it shows as scrambled channel. So I cannot watch or record them via the recorder.  Can someone help me?  Thank you in advance.

npb · Answer

see complete answer above ...  canal+ --> go through AV not DTV!

ryuma · Answer

Hello,  two questions:  if I press REC, it records a file of 8 hours, then moves to the next one. If I stop, I have to fast forward for a long time. How can I create blocks of 30 minutes or chapters?  I placed MP3s in directories, but when I play, it only reads the contents of the directory. Can we create a playlist to play music continuously, or do I have to put all the MP3s in the "root"?  thank you

andromede · Answer

Hello, my problem is that when I record with the REC button on the remote control, I can find what I have recorded. However, when I want to record from the guide or schedule a recording by minute, I set it up correctly, the little clock blinks fine but nothing records. I can't find what I recorded; it tells me that the recorded list is empty, even though I had programmed it well.  I don't understand how to solve this problem, and I thank you a thousand times in advance.  Oliver

andromede · Answer

Thank you very much for your help, it indeed works! Thank you However, can we watch a different channel than the one we're recording, and if so, how?  Thanks again really, sincerely  Olivier

rod · Answer

yes you can, directly through your TV if it has a TNT decoder, otherwise only non-TNT channels. just like with the VCR, actually it’s exactly the same! remember when we record and we change the channel via the VCR, of course not! we switch to the TV and well it’s still the same.

kptain · Answer

Hello,  I've been tearing my hair out for the past two days, I don't know what to do anymore, so I'm turning to people more competent than me... Let me explain my problem: I simply can't display any menu from my recorder on my TV, nor play a DVD.  I have a DVD SH 893 connected to a Samsung LCD TV as follows: Antenna cable to the recorder Recorder antenna connection to TV HDMI cable between recorder and TV.  I activated the Anynet function  Everything worked perfectly for a month, and now for two days, without having touched the connections, it no longer works; I can't display any images from my recorder. Whenever I try to switch to the recorder, the HDMI connection symbol appears, then the message "no signal" appears. If I try with a Scart cable instead of the HDMI, it works. So I first thought there was a failure in my HDMI cable, but I tested with another cable and I have the same problem! I unplugged everything and plugged it back in, nothing works  I also tried the recorder on another TV, and it works, no problem...  I don't know what else to test, please help!!! Thank you in advance...  kptain

blueskin · Answer

Hello,  First of all, thank you for this offer of help and all the tips shared in this forum. It has solved quite a few of my issues! However, there is still one that I haven't yet seen mentioned in this discussion.  My setup: TV: an old Phillips cathode ray tube (yes, it still works!) TNT decoder by Sagem Samsung SH 893 DVD/Recorder  Everything is connected via SCART to each other, so I can easily switch from one to the other.  My problem is as follows: My connections must be correct since I managed to make scheduled recordings on the hard drive. However, there have been several occasions where recordings stop well before the expected end (the recording is only... 17 seconds instead of 3 hours). I should clarify that, of course, my hard drive is empty initially (so there's plenty of space available) and that all conditions were met for it to work (recorder off, no manual stopping, and moreover, the recordings took place in the middle of the night, so without watching other channels). I would like to point out that these recordings were for programs from the TNT channels via the internal decoder of the recorder.  What would be the possible leads to understand where these interruptions are coming from?  Thank you for your help! Pierre

ryuma · Answer

Up : two questions :  if I press REC, it records a file for 8 hours, then moves on to the next one. If I stop, I have to fast forward for a long time. How can I create 30' blocks or chapters?  I put some mp3s in directories, if I play, it only plays the content of the directory. Can we create a playlist to play music continuously, or do we absolutely need to put all the mp3s in the "root"?  thank you  => I found that by pressing record multiple times, we can record for 30', 1h etc... but we need to confirm that we want to continue recording once that time limit has expired!

bricosoft · Answer

Hello, is there a topic explaining how this forum works? I would like to ask a question about the sh-893 but want to make sure the answer hasn't already been given. However, on my PC, the posts are displayed in random order: it jumps from 100 to 24, then to 72 for example. It's hard to keep track.

Philippe · Answer

Hello, I read with interest the discussions above. I recently got a Samsung UE40B6000 TV I thought that a Samsung DVDSH895 recorder would nicely complement my setup, but reading your questions/responses makes me anxious: 1. Does Anynet work well? Has everyone encountered problems with the TV turning on by itself at 8:00 AM during the time update? 2. Will my external hard drive, WESTERN DIGITAL My Passport, be recognized properly? Thank you very much for your responses!

denischti59 · Answer

Thank you for your response. No, I didn't get a loading screen, I stayed on the Samsung interface. I will format the DVD (if that's all it is...) and try everything again!

ryuma · Answer

What does the new firmware bring?

denischti59 · Answer

Well, it's written on Samsung's website ;) So, I formatted my DVD, burned it, I put the DVD in, loading icon in the top right, 20 seconds later the DVD comes out and I don’t know if there was an update. It's impossible to see the firmware version in the menus...  Do you have the same procedure on your side?

denischti59 · Answer

It should be good then, I have a firmware that dates from 10/2009 while the one on the Samsung site is from 09/2009! Thank you ;)

fab115 · Answer

Hello,  It's true that the manual is poorly done; you have to figure out how it works more by yourself than by using the manual. My problem is as follows: I recorded a program with parental controls enabled. Now that I want to watch it, it's impossible. However, I have turned off that lock. Do you have a solution? Thanks in advance. Fabrice

COXY · Answer

Hello,  First of all, thank you for all these explanations that are much clearer than the manual!!  Just a small clarification, when I try to copy a title from the hard drive library to USB, the recorder only gives me the option to copy to a DVD - I couldn't find the option to directly record to USB or an external hard drive (FAT 16 or 32 and even NTFS)  However, I have no problem transferring or playing DIVX from USB to the hard drive or a DVD  I noticed there’s a notion of PTP for USB - Is it important?  Can anyone help me because now I need to get TV recordings out of the recorder onto an external medium and I can't find a way (except DVD, but the files are too large) Has anyone managed to transfer and/or record to USB or external hard drive???  Thank you very much in advance for your help  Corine

Mr K · Answer

Hello, I have a 897, and I want to burn recorded shows from the hard drive to a DVD. Everything works well when I use DVD-Rs. When I use DVD+RWs, the player cannot read the DVD it just burned once it has been ejected. If I finalize the DVD before ejecting it, I still can't read it on the player, but the DVD is fine as I can read it on my computer. Has anyone experienced this issue? Should I return my player while it's still under warranty? Thanks.

KIKISPORTY83 · Answer

Hello, can you tell me if we can change the format (SP, LP) of the DVD when copying from the hard drive to a DVD? THANK YOU

GIVIGI · Answer

I couldn't find the answer to my silly question: I can't read a show recorded on the "Enfoirés" even though the recording was done correctly and it appears in the recorded list.

bonjour · Answer

Hi, Where can I find the showview function?? Thank you for your help.

Adri'38 · Answer

Hello,  I would like to know how to change the image format when I play a DVD, a recording, etc. Because every time, I have black bars on the sides, and I would like to be able to watch it in full screen.  Thank you in advance.

bonjour · Answer

Enlarging it may decrease the image quality, it depends, are there black bars at the top and bottom? If so, that's normal, the film is like that, you can't do anything about it. No idea about my problem?

bonjour · Answer

Hi, Where can I find the showview function?? Thank you for your help. (P.S.: neither TNT nor box, I have a BIS card)

ff49 · Answer

Hello, I would like to know how to record in original version on a channel that offers multiple languages. Which button should I press? Does it have to be the one on the set-top box or the one on the TV?

rere05 · Answer

Hello, can you tell me if we can record on both the DVD and the hard drive at the same time?  Thank you, best regards.

bonjour · Answer

Impossible.  Where can I find the showview function?? Thank you for your help. (PS: neither TNT, nor box, I have a BIS card)

jacques · Answer

I can't connect the DSL channels, thank you.

ubahia · Answer

Hello, I recorded shows on the hard drive but I can't watch them even though it says that the recording was successful. What should I do?

lecods · Answer

Hi,  I have a connection issue with this Samsung SH893 player. I have a Canalsat decoder, a Samsung TV, and this player. My connection is as follows:  Canalsat to SH893 player via SCART, then from the player to the TV via SCART on my ext1.  My problem is that when the player is off and Canalsat is on, I have no signal on ext1. If I turn on the player, I then get the Canalsat channels on my TV. Where could the problem come from?  I should mention that I used to have another Samsung DVD player, and with the same connections, with the player off, I had the Canalsat channels on the TV.  Thank you.

dimitri · Answer

Hello,  I wanted to know if it was possible to schedule 1 series per week instead of doing the recordings one by one.  Thank you.

bonjour · Answer

Yes, instead of going down, you have to go up and choose (every day, every Tuesday, every Monday...)

ludodu85 · Answer

Good evening everyone,  So, I just bought this DVD recorder, and like many others, I'm completely lost after reading the installation guide.  My equipment is as follows:  Samsung TV with built-in DTT tuner Orange decoder, with whom I have an internet subscription The famous DVD recorder in question  I don't know where to start; it's total panic. I assume questions have already been asked about this, but I really need some help, please!!  Thank you in advance.

dim · Answer

Hello,  I can't change the recording mode (XP - SP - LP - EP - FR) during a manual programming on the hard drive.  What should I do? Thank you.

excalibur · Answer

You cannot change the recording mode when recording a digital channel (DTT). It's one of the many issues with this device.

BM92 · Answer

Hello everyone, Could you please provide me with the latest version of the firmware? Currently, I have version 20100210.23.SH895A/EU on my DVD-SH893. I found on the Samsung website version: sh895_100526_21 dated 2010-06-25. I think that's the last update. This firmware is also for the DVD-SH895. http://www.samsung.com/fr/consumer/detail/detail.do?tab=support&group=tv-audio-video&dType=D&type=dvd&menu2=detail&menu=download&cttID=2228064&disp_nm=DVD-SH893&model_nm=DVD-SH893&model_cd=DVD-SH893/XEF&language=&subtype=hdd-dvd-recorder&mType=FM&prd_ia_cd=03010900&vType=&cate_type=all

geeby · Answer

Hello, I recorded a TV show on the hard drive that I would like to burn onto a DVD, but when I start the copying process (onto a DVD+RW), I get this message: DVD capacity too small (4.4GB and the hard drive recording is 5.5GB) Is there any way to reduce the size of the hard drive file in order to copy it onto the DVD? Because when recording TNT channels, you can't change the recording mode (it's FR by default)? Thank you for your responses.

jv · Answer

I am interested in your offer for help; I don't even know how to record a show that is currently on, I don't know how to watch it, let alone how to program it, plus I have Canal+... Thank you.

pascal · Answer

Hello  I just bought a Samsung SH 893 DVD recorder, could you please explain to me how to record TNT since I can't get beyond channel six?  Thank you

Pitoche · Answer

Good evening, We have a Samsung SH-893 but cannot get any image on the television when we turn on the player and press the menu button on the DVD screen, the word setup appears. We have a SAMSUNG TV. Thank you for your help. Best regards.

Flaneur · Answer

Hello,  Thank you for sharing your knowledge; I found some very interesting things.  My immediate recording works very well. My programming activates, records, but I have nothing on my hard drive. I often lose all my files; my hard drive ends up empty.  After trying the advice from the manual, I am asking for your help.  PS: DVD SH 895

biloubilou · Answer

Hello, I just got a DVD SH893. I'm very happy with it, except that when I schedule a delayed recording, I can't watch certain channels (TF1, TMC, ...). Thank you in advance.

manuel · Answer

My DVD isn't recording.

juliette · Answer

Comment faire pour que l'heure soit affichée en permanence sur mon graveur Samsung 893.

juliette · Answer

Comment faire pour afficher l'heure en permanence sur mon graveur Samsung 893 ? Ça s'éteint quand mon enregistrement est terminé.

sylvia · Answer

Hello I just acquired one of these DVD PLAYERS and I have a problem with recording programs on the DVD. I bought +RW DVDs the recording goes well. When I try to play it, it works for 5 minutes and then it freezes, the image stays still and doesn't move anymore. Thank you for your response.

claudedan · Answer

Impossible to change XP SP LP on DVD, how to do it? Thank you.

jly · Answer

Hello, I accidentally formatted my hard drive instead of the CD Is there a trick to recover the recordings? Thank you very much for your help.

scalaire57970 · Answer

Formatted, it's all erased!

Dom · Answer

Hello,  I just read all the very interesting messages about this Samsung that I'm also interested in.  Quick question: can you play a video file (Divx) from an external hard drive connected via USB while recording a CanalSat/+ channel at the same time?  Thank you for your answers. Dom

telpette · Answer

Hello, I would like to know if I can copy VHS tapes to DVD in order to back them up? Thank you for your help.

bpm · Answer

Hello! I'm having trouble creating chapters in my recordings, even though I've enabled chapter creation in the settings... :/ Can someone help me?!

Jessica · Answer

Hello, I have a device that's similar, except I can read VHS transferred to DVD in the player where I burned it, but on my computer, it bugs out and says it's blank when it's actually burned, and it doesn't work in any DVD player either. :( What can I do? It's really frustrating to waste my time on this!

Marion · Answer

Hello, I have the same issue as Jessica, I think we need to finalize the DVD but even once finalized, I still can't play it on my regular DVD player.

jeamick · Answer

how to make a forward jump while playing a recording,

Sevlaura · Answer

Hello,  When I schedule a recording, it starts and, after at least 40 minutes, the picture freezes, the recorder bugs and doesn’t want to respond anymore, the same happens during direct recording. Can someone help me? My setup: TV with Built-in TNT Decoder and Samsung Recorder. Thanks

scalaire57970 · Answer

Simply a bad reception: check the antenna; The DVD's TNT decoder is much less powerful than that of the screens. Be careful not to schedule a recording on TF1HD or any other HD channel! It doesn't work!

scalaire57970 · Answer

Not surprising! You need to install a "Difficult Reception" TNT antenna (3 stacked antennas).

Sevlaura · Answer

Last question (before I thank you for your very, very valuable help):  Where can I find this type of antenna and at what price? (approximately). Thank you

emmada · Answer

Hello  I have a problem. I have a DVD recorder SH 893 connected to the antenna's antenna, my Samsung TV LE40C630 is connected to the recorder via an HDMI cable. My issue is that I can't watch HD channels on my TV through the SH 893, whereas if I connect the antenna directly to the TV I can watch them. I get the incompatible format message... does anyone have an idea? Thank you

Banga 28 · Answer

Hello, can we transfer a recording from the hard drive to a USB stick?  If yes, how to do it? Thank you.

ljess8 · Answer

Hello,  I just acquired a Samsung DVD recorder DVD-SH895. I transferred old camcorder tapes to the recorder's hard drive, then I made a copy of the file onto a DVD+R. So far, no problem ... When I tried to finalize the DVD, at the end of the 100% it gives me the following message: "Unable to finalize the disc. Please try again after cutting the power," and then the DVD ejects ... When I put it back into the player, it tries to read it without success since it is not finalized ... I can't access any menus to retry the finalization ... I've also unplugged it several times but nothing works ... Please help me. Thank you  Jessica

lbar012001 · Answer

Hello, I just went through these 6 super interesting pages but they don't address my little issue, which is quite simple. My Samsung recorder is connected to my TV via the HDMI output of the recorder and the HDMI1 input of the TV. I can't access the recorder's menu (library...) without first selecting the HDMI1 input on my TV, it's not a big deal but I think the activation of the recorder's menu should take control over the TV, right? I have another TV with a Panasonic recorder and it works very well; activating the menu takes control of the TV without having to change the source beforehand. Thank you, Laurent

scalaire57970 · Answer

The plasma has nothing to do with it! The digital signal coming from the antenna is probably not good!

LM14 · Answer

What is the software version? To see it, you need to open the drawer and press the info button on the remote for 5 seconds. I returned my player in repair and apparently they replaced the hard drive!!!

DOMI5940 · Answer

I don't know anything about it at all.

marie · Answer

I can't figure out how to make a scheduled recording... thank you for your help.

fanny762 · Answer

Hello,  I recently bought a SAMSUNG set:  - the UE32C6740 TV;  - the HDD/DVD recorder SH895.  The installation went perfectly. No recording issues.  My only problem (for now): Initially, I scanned for channels on the TV ==> received all the channels. Then, I connected my recorder and scanned for channels again ==> it found all the channels!  Unfortunately, I went back to my TV and now many channels are not working anymore. So, I started a channel scan on the TV again. And this time, the TV cannot find TMC, NRJ12, and Direct Star.  Do you have any idea if there’s a way to recover these channels?  It’s important for me to get these channels back since if I record with my recorder, I can only watch the channels through the TV, not through the recorder.  Thanks @ you

kalaghan · Answer

Hello, thanks for your help!  My question is going to be super basic, but it has been driving me crazy for several days despite all my tests...  I transferred some divx files to the hard drive of the dvd-sh893, but now I would like to organize them a bit.... I've been searching everywhere, but I can't find anything that allows me to move files to another directory... The only other solution (I haven't tried it, I'm afraid it might be that...) ? - copy to another drive - delete from the hdd of the dvd - copy from the other drive to the hdd of the dvd, possibly creating a new folder...  Do you see another solution??

kalaghan · Answer

Hello again...  I'm desperately trying to disable the control of my television using the remote of the 893.  Any ideas?  Thanks in advance  Seb

K78700 · Answer

I'm not sure this works.  To be honest, it's better to return this recorder and buy another brand. This device is very limited. No option to record to DVD any signal coming from AV1 or 2 No option to change the recording format when using the DTT (FR mandatory) Limitation for recording on USB (not all formats) DVD playback issues on PC (not always, I admit)  Samsung's customer service is awful and narrow-minded.  Personally, I am very disappointed with this equipment and regret realizing it too late to return it within the legal timeframe.  K

fafane84 · Answer

Hi everyone!  Could you tell me what changes the new firmware brings? (version 20100914.14 from Sep 20, 2010)  Thanks in advance.  -- Gigabyte EP45-UD3 / C2D E7400 2.80GHz@3.50GHz / Scythe Mugen 2 / Crucial Ballistix DDRII 2 x 2GB PC6400 CAS 4-4-4-12 / MSI Radeon HD 5770 HAWK (875/1200 MHz) / Corsair VX450W / Antec Three Hundred / Samsung Spinpoint F1 S-ATA 640GB

fafane84 · Answer

Has no one updated this burner?   -- Gigabyte EP45-UD3 / C2D E7400 2.80GHz@3.50GHz / Scythe Mugen 2 / Crucial Ballistix DDRII 2 x 2 Go PC6400 CAS 4-4-4-12 / MSI Radeon HD 5770 HAWK (875/1200 MHz) / Corsair VX450W / Antec Three Hundred / Samsung Spinpoint F1 S-ATA 640 Go

fafane84 · Answer

I'm absolutely unable to update this burner.  I tried with a Verbatim CD-R, a CD-RW, and a DVD-RW. They were all finalized.  It's not working. I'm still on version 20100210.23.   -- Gigabyte EP45-UD3 / C2D E7400 2.80GHz@3.50GHz / Scythe Mugen 2 / Crucial Ballistix DDRII 2 x 2GB PC6400 CAS 4-4-4-12 / MSI Radeon HD 5770 HAWK (875/1200 MHz) / Corsair VX450W / Antec Three Hundred / Samsung Spinpoint F1 S-ATA 640GB

lillyrose14 · Answer

Hello, How do I record a program from the hard drive to a DVD??? I've tried following the instructions in the manual but it's not working!! If someone could help me... Thanks for any answers.

gismo · Answer

Once the recording is done on the scheduled list, you need to press OK to exit and close the DVD... wait for the DVD to restart automatically.

freefree12 · Answer

Good evening, I also have a Samsung SH893 that I bought because it records, burns, and acts as a TNT decoder  The device serves as a TNT decoder for an old TV (via a SCART socket), I would like to know if I can record one program while watching another at the same time? (for example: I'm recording channel 3 while at the same time I want to watch channel 1)

fab115 · Answer

Good evening,  Unfortunately, it is impossible to watch anything other than what we are currently watching. To do that, you need a device with a dual tuner.

Cattman · Answer

Good evening,  I can't find what format to save my personal video edits in so that I can play them on my home player (sh 895). I've found a lot of information on various websites, I've tried many things but nothing has worked. If it's not in .avi container, the file doesn't show up, and in avi format, no matter the encoding format, I always get "unsupported file format." I don't understand ... Can someone enlighten me?  Thank you.

Seven7 · Answer

Hello everyone!  As for me, I haven't bought the "SH 893" yet because I want to make sure I can record CanalSat or Canal+ channels on DVD? I prefer a "Samsung" recorder since I already have a TV of the same brand (LE32D550ZF). At first, I turned to the "Samsung Blu-ray 3D Recorder BD-D8200." I'm not sure, but from what I understood, it doesn't record those channels? My girlfriend has the "SH 893," but she doesn't live in the same department and doesn't have CanalSat or Canal+. So if someone could confirm this for me or has tried it, that would be great to let me know. If so, I'll buy it tomorrow, lol!  ps: Ah, it was so much easier with VHS. We were told that technology would take us into the 21st century. Of course, the quality of images and sound is amazing. But I say that too much technology kills technology.

jamesuh · Answer

Hello,  I personally bought an SH-893 on http://www.e-fidelite.net/comparateur-disque-dur-multimedia and I can't figure out how to make a delayed recording...  Apparently, I’m not the only one in this situation. Is it possible to create a little tutorial on the procedure to follow?  Thanks in advance!

nanaga · Answer

Hello,  I’m reaching out for help after everything I’ve read; I’m a bit worried about having purchased this Samsung SH893 recorder. Our home is wired with Numericable network. When programming the DVD, it distinguishes between digital channels (which is okay) and other channels in analog (channels with static and non-existent or crackling sound), which I obviously cannot record. Is there a solution? Help! Thank you for your assistance.

aristochat · Answer

Hello, I bought this product two years ago and today it refuses to read certain DVDs that are from the correct region... apparently, it's an optical block issue! Two of us have this problem in my circle with the same product, but I've seen that other people on forums have the same issue. I plan to take it to the workshop with a request for support from Samsung, which would be the least they could do...

CHAMAXFOOT · Answer

I just inherited this Samsung SH893 DVD burner and I'm struggling to use it I've already given up on the idea of using it (it's so confusing that I can't understand the manual) However, I would still like to be able to burn the mini video cassettes from my camcorder (memories of the kids when they were babies) using this burner. I've tried but the message on the screen stays the same: DV player not connected Maybe you could explain to me in simpler terms than the manufacturer's language how I could manage? In the manual, they mention a DV cable Is it the cable with 3 colored connectors (yellow, white, and red) on both ends? Thanks in advance for your help Best regards

egn42 · Answer

Can someone give me the exact procedure to read a scheduled recording in my list because I can't do it  thank you for your help kind regards

egn42 · Answer

OUI, I WOULD LIKE TO, tell me how to listen to a programmed recording because I can't do it.

Anto314 · Answer

Hello, I removed the internal hard drive from the DVD, and I would like to know what the file system type is (FAT 16, FAT 32, NTFS). I retrieved the data from it, then replaced it without success, so I reformatted it to FAT 16.

guillermalain · Answer

Hello,
I would like to update my Samsung SH893A DVD player/recorder, but the file offered on the Samsung website is for the SH895, so it's impossible to update!
Does anyone have the correct update file?
alain <email removed by moderation>

Support proposé : samsung sh-893 - Page 8

Black screen on my windows security

How to recover photos from whatsapp please

Fan spinning continuously

Mosaic+pixels tv image by waves, fransat all programmes

Orange and sosh push up internet cancellation costs

Calendar

Youtube adopts a sleeker, more pleasant-to-use interface

Application note does not stay open on my iphone

Texture issues in enshrouded

Incomplete video