Solution to install Epson SX400 via WIFI

Hello,

I finally managed to set up my printer via Wi-Fi with my Neuf Box on Windows Vista.
Here is the solution hoping not to have missed anything.
If I made any mistakes in describing the solution, please excuse me in advance.
Sorry for the length of the post, but it was necessary.

1- Install the printer without Wi-Fi
2- MFP Manager: uncheck automatic release
3- Connect the Edimax box to the PC with an ethernet cable (the WLAN light should be blinking)
4- Use Server Manager in the Edimax directory to recognize the print server
5- Select it
6- Click on the gear icon
7- Click on TCP/IP and choose static IP and save
8- Click on Wireless and manually assign the wireless network
9- Choose the security mode identical to your Box, as well as the algorithm and the key
10- Click Next
11- Choose to configure IP manually
12- Click Next
13- Save
14- Unplug the ethernet cable and the server should remain in memory in MFP Manager
15- In Windows, open Control Panel
16- Then networks
17- Set up a wireless connection
18- Connect manually to a wireless network
19- Give it any name
20- Choose the security mode identical to your Box, the encryption (=algorithm above) and the key
21- The network appears in Manage wireless networks
22- Move it down (blue arrow) to place it below the box
23- Connect the Edimax box to the printer with the USB cable and turn on the printer
24- Then select Add Printer
25- Network, wireless
26- Select The printer I want isn't listed
27- Select Add by TCP/IP address
28- Enter the IP address displayed in MFP manager
29- Click Next
30- Choose your printer
31- Click Next then test page

There you go, I hope this solution helps more than one, because I've been trying for 2 weeks and I truly believed I was going to give up.

Phil