Bonjour, je cherche une piste a mon problème ! mon ordi se met a ralentir enormement et brutalement que ce soit a regarder des videos sur intenet, ouvrir un programme quelquoncque ! je finis par l'eteindre ! ça repars sans problème ou au bout de quelques minutes le problème recommence ! peut etre un souci materiel mais je ne sais pas quoi !

Ralentissement brutal

Réponse 1 / 35

dubcek Messages postés 18786 Date d'inscription Statut Contributeur Dernière intervention 5 641

hello
démarrer top et observer si une tâche anormale démarre et/ou la mémoire diminue rapidement

Réponse 2 / 35

kiki

Bonjour,

Pour véirifer sous Linux, il faut ouvrir une console/terminal et lancer le programme top.
Cela permet de vérifier si un process n'utilise pas le processeur à 100% ou presque. Si c'est le cas il faut trouver quel programme est incriminé.

Il peut aussi y avoir un trojan. A vérifier si cela le fait uniquemement avec une connexion au réseau.
Pour éliminer les rootkit il faut installer le paquet chkrootkit et lancer cette commande en etant root ou avec sudo (c'est selon la distri).

Il peut aussi y avoir un blocage quand la partition /var ou /tmp est pleine.
Vérifier l'occupation des disques avec "df -h"

Vérifier les process de l'utilisateur : "ps aux". En 3e et 4e colonne vous avez le taux d'occupation CPU et RAM.

Cordialement,

patoche

deja merci pour vos reponses !

j'ai vérifié le process et la ram ! pas de problèmes
occupation des disques ! pas de problème
pour le trojan j'ai installé les paquets mais n'arrive pas a lancer la commande que tu m'as dis !
j'ai lancé top ! en haut le taux de cpu tourne a environ 80% et un peu plus bas j'ai d'indiqué que firefox utilise plus de 100% cpu !

Réponse 3 / 35

bob031 Messages postés 8228 Statut Membre 473

bonjour,

est-ce un problème qui est arrivé subitement ou bien a-t-il été toujours ainsi ?

quelle est la distribution linux ?

la bureau 3D est-il activé ?

peut-on avoir un copier-coller de la commande top ?

merci.

patoche

au debut j'avais pas de problème !
puis une fois ou deux !
et puis maintenant tres frequement !
je suis sur ubuntu 8.04 hardy haeron
le bureau 3d est desactivé comme tous les effets graphiques !

top - 19:37:42 up 5:59, 2 users, load average: 2.00, 2.22, 1.99
Tasks: 131 total, 2 running, 129 sleeping, 0 stopped, 0 zombie
Cpu(s): 82.8%us, 7.7%sy, 0.0%ni, 8.2%id, 0.0%wa, 0.5%hi, 0.8%si, 0.0%st
Mem: 2985832k total, 2909364k used, 76468k free, 492972k buffers
Swap: 3229024k total, 0k used, 3229024k free, 2063664k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
23938 pat 20 0 224m 96m 25m R 119 3.3 16:56.62 firefox
18098 root 20 0 371m 66m 20m S 17 2.3 7:47.15 Xorg
23809 pat 20 0 74560 19m 11m S 9 0.7 0:47.46 gnome-terminal
18247 pat 20 0 19360 10m 7684 S 9 0.4 0:46.30 metacity
23861 pat 20 0 2308 1128 852 R 4 0.0 0:36.62 top
18252 pat 20 0 15812 2740 1744 S 2 0.1 0:31.68 gnome-screensav
50 root 15 -5 0 0 0 S 1 0.0 0:02.64 kacpid
1878 root 15 -5 0 0 0 S 1 0.0 0:10.06 scsi_eh_1
5179 root 15 -5 0 0 0 S 1 0.0 0:05.16 kondemand/0
5356 root 20 0 30192 2240 1920 S 1 0.1 0:14.12 NetworkManager
5764 root 20 0 3304 1040 908 S 1 0.0 0:11.64 hald-addon-stor
18287 pat 20 0 25864 11m 8280 S 1 0.4 0:16.10 nm-applet
5340 messageb 20 0 2908 1404 800 S 0 0.0 0:52.79 dbus-daemon
1 root 20 0 2844 1688 544 S 0 0.1 0:02.14 init
2 root 15 -5 0 0 0 S 0 0.0 0:00.00 kthreadd
3 root RT -5 0 0 0 S 0 0.0 0:00.06 migration/0
4 root 15 -5 0 0 0 S 0 0.0 0:01.60 ksoftirqd/0

dubcek Messages postés 18786 Date d'inscription Statut Contributeur Dernière intervention 5 641 > patoche

peux-tu mettre les données de top entre

pour que soit convervé l'alignement des colonnes, merci

patoche > dubcek Messages postés 18786 Date d'inscription Statut Contributeur Dernière intervention

top - 19:37:42 up 5:59, 2 users, load average: 2.00, 2.22, 1.99
Tasks: 131 total, 2 running, 129 sleeping, 0 stopped, 0 zombie
Cpu(s): 82.8%us, 7.7%sy, 0.0%ni, 8.2%id, 0.0%wa, 0.5%hi, 0.8%si, 0.0%st
Mem: 2985832k total, 2909364k used, 76468k free, 492972k buffers
Swap: 3229024k total, 0k used, 3229024k free, 2063664k cached

PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
23938 pat 20 0 224m 96m 25m R 119 3.3 16:56.62 firefox
18098 root 20 0 371m 66m 20m S 17 2.3 7:47.15 Xorg
23809 pat 20 0 74560 19m 11m S 9 0.7 0:47.46 gnome-terminal
18247 pat 20 0 19360 10m 7684 S 9 0.4 0:46.30 metacity
23861 pat 20 0 2308 1128 852 R 4 0.0 0:36.62 top
18252 pat 20 0 15812 2740 1744 S 2 0.1 0:31.68 gnome-screensav
50 root 15 -5 0 0 0 S 1 0.0 0:02.64 kacpid
1878 root 15 -5 0 0 0 S 1 0.0 0:10.06 scsi_eh_1
5179 root 15 -5 0 0 0 S 1 0.0 0:05.16 kondemand/0
5356 root 20 0 30192 2240 1920 S 1 0.1 0:14.12 NetworkManager
5764 root 20 0 3304 1040 908 S 1 0.0 0:11.64 hald-addon-stor
18287 pat 20 0 25864 11m 8280 S 1 0.4 0:16.10 nm-applet
5340 messageb 20 0 2908 1404 800 S 0 0.0 0:52.79 dbus-daemon
1 root 20 0 2844 1688 544 S 0 0.1 0:02.14 init
2 root 15 -5 0 0 0 S 0 0.0 0:00.00 kthreadd
3 root RT -5 0 0 0 S 0 0.0 0:00.06 migration/0
4 root 15 -5 0 0 0 S 0 0.0 0:01.60 ksoftirqd/0

dubcek Messages postés 18786 Date d'inscription Statut Contributeur Dernière intervention 5 641 > patoche

mon messagre a été filtré par CCM
je voulais dire entre code et /code

patoche > dubcek Messages postés 18786 Date d'inscription Statut Contributeur Dernière intervention

le tableau était avec tous les espaces et quand je poste ça donne ça !

et entre code/code je vois pas ce que tu veux dire !

Réponse 4 / 35

dubcek Messages postés 18786 Date d'inscription Statut Contributeur Dernière intervention 5 641

ca

hello
ici
  sont
    respectées
      les colonnes

patoche

tu peut etre plus clair ?

Réponse 5 / 35

dubcek Messages postés 18786 Date d'inscription Statut Contributeur Dernière intervention 5 641

en haut de la fenêtre de rédaction, tu as des boutons
G I S <>...
cliquer <>

Réponse 6 / 35

patoche

t'as besoin de tout le tableau ? vu le temps que j'ai passé a tout aligner !

Réponse 7 / 35

dubcek Messages postés 18786 Date d'inscription Statut Contributeur Dernière intervention 5 641

??
tu fais un copier coller, non ?
l

Réponse 8 / 35

patoche

top - 12:49:05 up 53 min, 2 users, load average: 2.15, 3.05, 2.14
Tasks: 124 total, 2 running, 121 sleeping, 0 stopped, 1 zombie
Cpu(s): 79.1%us, 11.7%sy, 0.0%ni, 8.6%id, 0.0%wa, 0.3%hi, 0.3%si, 0.0%st
Mem: 2985832k total, 1972916k used, 1012916k free, 11272k buffers
Swap: 3229024k total, 0k used, 3229024k free, 1606464k cached

PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
9078 pat 20 0 192m 80m 26m R 62 2.8 8:15.78 firefox
5956 root 20 0 366m 61m 21m S 62 2.1 3:01.17 Xorg
6373 pat 20 0 19400 10m 7688 S 13 0.4 0:25.44 metacity
6379 pat 20 0 42864 25m 15m S 8 0.9 0:30.58 gnome-panel
9322 pat 20 0 65488 18m 10m S 8 0.6 0:22.16 gnome-terminal
6971 pat 20 0 45300 29m 6332 S 7 1.0 1:10.69 wish8.5
9391 pat 20 0 2308 1128 852 R 4 0.0 0:16.86 top
5380 messageb 20 0 2848 1344 800 S 3 0.0 0:11.66 dbus-daemon
6380 pat 20 0 15812 2740 1744 S 3 0.1 0:16.30 gnome-screensav
5686 haldaemo 20 0 6232 4368 3608 S 1 0.1 0:08.48 hald
6424 pat 20 0 25864 12m 8320 S 1 0.4 0:08.32 nm-applet
9 root 15 -5 0 0 0 S 1 0.0 0:00.12 events/0
4226 root 15 -5 0 0 0 S 1 0.0 0:01.08 iwl3945
5220 root 15 -5 0 0 0 S 1 0.0 0:00.74 kondemand/1
5689 root 20 0 8856 2376 1608 S 1 0.1 0:00.92 console-kit-dae
5751 root 20 0 3236 1072 908 S 1 0.0 0:01.20 hald-runner
6345 pat 20 0 46212 15m 9024 S 1 0.5 0:02.82 gnome-settings-

bob031 Messages postés 8228 Statut Membre 473

l'idée était de coller ici (comme tu viens de le faire) puis de sélectionner tout le texte collé, puis cliquer sur le 4ème symbole (représenté par des brackets < > en bleu) afin que ton texte conserve la mise en page d'origine !

Réponse 9 / 35

patoche

voila le copier coller avec "conserver la mise en forme du texte" !

patoche

top - 12:49:05 up 53 min, 2 users, load average: 2.15, 3.05, 2.14
Tasks: 124 total, 2 running, 121 sleeping, 0 stopped, 1 zombie
Cpu(s): 79.1%us, 11.7%sy, 0.0%ni, 8.6%id, 0.0%wa, 0.3%hi, 0.3%si, 0.0%st
Mem: 2985832k total, 1972916k used, 1012916k free, 11272k buffers
Swap: 3229024k total, 0k used, 3229024k free, 1606464k cached

PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
9078 pat 20 0 192m 80m 26m R 62 2.8 8:15.78 firefox
5956 root 20 0 366m 61m 21m S 62 2.1 3:01.17 Xorg
6373 pat 20 0 19400 10m 7688 S 13 0.4 0:25.44 metacity
6379 pat 20 0 42864 25m 15m S 8 0.9 0:30.58 gnome-panel
9322 pat 20 0 65488 18m 10m S 8 0.6 0:22.16 gnome-terminal
6971 pat 20 0 45300 29m 6332 S 7 1.0 1:10.69 wish8.5
9391 pat 20 0 2308 1128 852 R 4 0.0 0:16.86 top
5380 messageb 20 0 2848 1344 800 S 3 0.0 0:11.66 dbus-daemon
6380 pat 20 0 15812 2740 1744 S 3 0.1 0:16.30 gnome-screensav
5686 haldaemo 20 0 6232 4368 3608 S 1 0.1 0:08.48 hald
6424 pat 20 0 25864 12m 8320 S 1 0.4 0:08.32 nm-applet
9 root 15 -5 0 0 0 S 1 0.0 0:00.12 events/0
4226 root 15 -5 0 0 0 S 1 0.0 0:01.08 iwl3945
5220 root 15 -5 0 0 0 S 1 0.0 0:00.74 kondemand/1
5689 root 20 0 8856 2376 1608 S 1 0.1 0:00.92 console-kit-dae
5751 root 20 0 3236 1072 908 S 1 0.0 0:01.20 hald-runner
6345 pat 20 0 46212 15m 9024 S 1 0.5 0:02.82 gnome-settings-

Réponse 10 / 35

patoche

bon je crois que j'ai fais ce que j'ai pu !
je l'ai meme retouché pour remettre les espaces ! appuyer sur cette putain de touche pour conserver la mise en forme maois rien n'y fait ! voila !
merci quand meme de votre aide meme si elle ne m'a pas servie a grand chose !

Réponse 11 / 35

dubcek Messages postés 18786 Date d'inscription Statut Contributeur Dernière intervention 5 641

hello
tu fais copier entre les Xcode>ici</codeX ?
remplacer X par <>

pour résumer, laisser tourner top et quand la machine ralenti observer si une tâche consomme tout le cpu (colonne %CPU) et occupe de plus en plus de mémoire (colonne %MEM)

patoche

voila ce que j'ai ce matin et mon ordi qui bug a mort !

 top - 13:04:48 up 9 min,  2 users,  load average: 2.63, 2.18, 1.15
Tasks: 121 total,   1 running, 119 sleeping,   0 stopped,   1 zombie
Cpu(s):  3.6%us,  2.9%sy,  0.0%ni, 93.2%id,  0.0%wa,  0.2%hi,  0.2%si,  0.0%st
Mem:   2985824k total,   627508k used,  2358316k free,    40020k buffers
Swap:  3229024k total,        0k used,  3229024k free,   339668k cached

  PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND            
 5930 root      20   0  359m  51m  16m S    3  1.8   0:51.43 Xorg               
 9129 pat       20   0 73668  19m  11m S    1  0.7   0:07.34 gnome-terminal     
 1614 root      15  -5     0    0    0 S    1  0.0   0:00.24 ata/0              
 6333 pat       20   0 19348  10m 7668 S    1  0.4   0:08.04 metacity           
 9175 pat       20   0  2308 1116  852 R    1  0.0   0:00.30 top                
 6913 pat       20   0 45188  29m 6324 S    0  1.0   0:26.29 wish8.5            
    1 root      20   0  2844 1688  544 S    0  0.1   0:02.02 init               
    2 root      15  -5     0    0    0 S    0  0.0   0:00.00 kthreadd           
    3 root      RT  -5     0    0    0 S    0  0.0   0:00.00 migration/0        
    4 root      15  -5     0    0    0 S    0  0.0   0:00.04 ksoftirqd/0        
    5 root      RT  -5     0    0    0 S    0  0.0   0:00.00 watchdog/0         
    6 root      RT  -5     0    0    0 S    0  0.0   0:00.00 migration/1        
    7 root      15  -5     0    0    0 S    0  0.0   0:00.00 ksoftirqd/1        
    8 root      RT  -5     0    0    0 S    0  0.0   0:00.00 watchdog/1         
    9 root      15  -5     0    0    0 S    0  0.0   0:00.04 events/0           
   10 root      15  -5     0    0    0 S    0  0.0   0:00.04 events/1           
   11 root      15  -5     0    0    0 S    0  0.0   0:00.00 khelper

patoche > patoche

et top qui n'arrete pas de changer et j'ai une ligne que je n'avais jamais vu ( celle avec haldaemo en user ! ) je ne sais pas ce que c'est ! j'ai reussi a lancer la commande pour verifier les trojan mais rien n'est infecté !

 top - 13:12:41 up 17 min,  2 users,  load average: 1.17, 1.93, 1.43
Tasks: 122 total,   1 running, 120 sleeping,   0 stopped,   1 zombie
Cpu(s): 32.6%us, 10.3%sy,  0.0%ni, 56.5%id,  0.0%wa,  0.6%hi,  0.0%si,  0.0%st
Mem:   2985824k total,   681224k used,  2304600k free,    40540k buffers
Swap:  3229024k total,        0k used,  3229024k free,   347008k cached

  PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND            
 9197 pat       20   0  187m  67m  24m S   41  2.3   7:38.10 firefox            
 5930 root      20   0  361m  56m  20m S   19  1.9   2:10.95 Xorg               
 9129 pat       20   0 74440  19m  11m S    6  0.7   0:13.70 gnome-terminal     
 6913 pat       20   0 45188  29m 6324 S    4  1.0   0:51.80 wish8.5            
 9175 pat       20   0  2308 1116  852 R    3  0.0   0:16.58 top                
 6334 pat       20   0 15812 2672 1688 S    2  0.1   0:10.28 gnome-screensav    
 5356 messageb  20   0  2852 1336  800 S    1  0.0   0:09.96 dbus-daemon        
 6333 pat       20   0 19348  10m 7676 S    1  0.4   0:11.20 metacity           
 5196 root      15  -5     0    0    0 S    1  0.0   0:00.70 kondemand/1        
 5372 root      20   0 30192 2236 1920 S    1  0.1   0:02.68 NetworkManager     
 5662 haldaemo  20   0  6144 4248 3560 S    1  0.1   0:07.18 hald               
 5727 root      20   0  3236 1068  900 S    1  0.0   0:01.14 hald-runner        
 5780 root      20   0  3304 1040  908 S    1  0.0   0:02.20 hald-addon-stor    
 6335 pat       20   0 42468  24m  15m S    1  0.9   0:09.20 gnome-panel        
 6377 pat       20   0 25864  12m 8312 S    1  0.4   0:07.96 nm-applet          
 6516 pat       20   0 15060 2756 2292 S    0  0.1   0:01.41 gvfsd-trash

dubcek Messages postés 18786 Date d'inscription Statut Contributeur Dernière intervention 5 641 > patoche

côté CPU, Mem et Swap, il n'y a rien d'anormal. voir l'espace disque comme le suggérait kiki : df -h
est-ce que tu dois éteindre le pc comme dit au post 1 ? peut-être un problème matériel, tourner des diagnostiques ?

patoche > dubcek Messages postés 18786 Date d'inscription Statut Contributeur Dernière intervention

sur mon dique dur j'ai pas grand chose 16go occuppé sur 71 go !
coté materiel j'ai utilisé un logiciel " test LAB express" qui teste le processeur, la memoire , le disque dur , l'affichage standard , le lecteur cd et la connexion internet ! les resultats étaient très bons !

Réponse 12 / 35

bob031 Messages postés 8228 Statut Membre 473

salut,

Firefox semble prendre toutes tes ressources (119 et 62 %CPU dans les résultats top montrés ) !

quelle version Firefox as-tu ?

as-tu le même problème si Firefox n'est pas ouvert ?

patoche

j'ai la version 3.0
et si firefox n'est pas ouvert je peux avoir aussi des problemes !

Réponse 13 / 35

bob031 Messages postés 8228 Statut Membre 473

dans ce cas fais ce que dubcek préconise, càd :

pour résumer, laisser tourner top et quand la machine ralenti observer si une tâche consomme tout le cpu (colonne %CPU) et occupe de plus en plus de mémoire (colonne %MEM)

... puis dis-nous ce qu'il en ait ...

patoche

salut

alors j'ai fais ce que vous m'avez conseillé ! j'ai observé que firefox pouvait tourner entre 100 et 150 % cpu et la memoire allait jusqu'a 10 %
y'a xorg (je ne sais pas ce que c'est ) qui monte a 30% cpu et 5% mem !
sinon je n'ai rien vu de special dans top !
peut etre que ça vous donne une piste parce que ça devient vraiment galere !
et j'allais oublié depuis 3 jours ( je ne sais pas si c'est en rapport ) mais ça m'arrive d'avoir internet qui se ferme tout seul !

Réponse 14 / 35

dubcek Messages postés 18786 Date d'inscription Statut Contributeur Dernière intervention 5 641

Xorg c'est le serveur X
la tâche qui consomme du cpu n'est pas forcémment celle qui consomme de la mémoire, il faudrait voir toutes les tâches au moment du problème.
il faudrait aussi voir les lignes Mem et Swap

Réponse 15 / 35

dubcek Messages postés 18786 Date d'inscription Statut Contributeur Dernière intervention 5 641

pas de messages dans /var/adm/messages ?

patoche

je ne sais pas !
ou et comment est ce que je peux le verifier ?

Réponse 16 / 35

dubcek Messages postés 18786 Date d'inscription Statut Contributeur Dernière intervention 5 641

more /var/adm/messages
ou
dmesg

patoche

j'ai préferé te poster le resultat, moi je ne vois rien qui me saute aux yeux !

[   22.984229] system 00:0a: ioport range 0xa40-0xa4f has been reserved
[   22.984239] system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
[   22.984244] system 00:0b: ioport range 0x800-0x87f has been reserved
[   22.984249] system 00:0b: ioport range 0x400-0x41f has been reserved
[   22.984254] system 00:0b: ioport range 0x480-0x4bf has been reserved
[   22.984260] system 00:0b: iomem range 0xfed1c000-0xfed1ffff has been reserved
[   22.984266] system 00:0b: iomem range 0xfed20000-0xfed3ffff has been reserved
[   22.984271] system 00:0b: iomem range 0xfed45000-0xfed89fff has been reserved
[   22.984276] system 00:0b: iomem range 0xffb00000-0xffbfffff has been reserved
[   22.984282] system 00:0b: iomem range 0xfff00000-0xffffffff could not be reserved
[   22.984292] system 00:0c: ioport range 0x250-0x253 has been reserved
[   22.984297] system 00:0c: ioport range 0x256-0x25f has been reserved
[   22.984305] system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved
[   22.984311] system 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved
[   22.984316] system 00:0c: iomem range 0xfec10000-0xfec17fff has been reserved
[   22.984321] system 00:0c: iomem range 0xfec18000-0xfec1ffff has been reserved
[   22.984327] system 00:0c: iomem range 0xfec20000-0xfec27fff has been reserved
[   22.984337] system 00:0d: iomem range 0xe0000000-0xe3ffffff has been reserved
[   22.984347] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[   22.984353] system 00:0e: iomem range 0xc0000-0xcffff could not be reserved
[   22.984358] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[   22.984363] system 00:0e: iomem range 0x100000-0xb7ffffff could not be reserved
[   22.984369] system 00:0e: iomem range 0x0-0x0 could not be reserved
[   23.015051] PCI: Bridge: 0000:00:01.0
[   23.015056]   IO window: b000-dfff
[   23.015062]   MEM window: fe000000-fe0fffff
[   23.015067]   PREFETCH window: bff00000-dfefffff
[   23.015073] PCI: Bridge: 0000:00:1c.0
[   23.015077]   IO window: a000-afff
[   23.015084]   MEM window: fdf00000-fdffffff
[   23.015089]   PREFETCH window: disabled.
[   23.015096] PCI: Bridge: 0000:00:1c.1
[   23.015099]   IO window: disabled.
[   23.015106]   MEM window: fde00000-fdefffff
[   23.015112]   PREFETCH window: disabled.
[   23.015118] PCI: Bridge: 0000:00:1c.2
[   23.015123]   IO window: 9000-9fff
[   23.015130]   MEM window: fd600000-fddfffff
[   23.015136]   PREFETCH window: bdf00000-bfefffff
[   23.015144] PCI: Bridge: 0000:00:1e.0
[   23.015146]   IO window: disabled.
[   23.015153]   MEM window: fd500000-fd5fffff
[   23.015159]   PREFETCH window: disabled.
[   23.015183] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[   23.015191] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   23.015217] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[   23.015226] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   23.015253] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
[   23.015261] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   23.015288] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[   23.015297] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[   23.015313] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   23.015329] NET: Registered protocol family 2
[   23.052270] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   23.052496] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[   23.053622] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   23.054220] TCP: Hash tables configured (established 131072 bind 65536)
[   23.054225] TCP reno registered
[   23.064434] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0
[   23.465322] Switched to high resolution mode on CPU 1
[   23.678281]  it is
[   24.327801] Freeing initrd memory: 7733k freed
[   24.328023] Simple Boot Flag at 0x52 set to 0x1
[   24.329093] audit: initializing netlink socket (disabled)
[   24.329110] audit(1233412772.404:1): initialized
[   24.329490] highmem bounce pool size: 64 pages
[   24.332886] VFS: Disk quotas dquot_6.5.1
[   24.333006] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   24.333229] io scheduler noop registered
[   24.333232] io scheduler anticipatory registered
[   24.333236] io scheduler deadline registered
[   24.333255] io scheduler cfq registered (default)
[   24.333366] Boot video device is 0000:06:00.0
[   24.333553] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   24.333604] assign_interrupt_mode Found MSI capability
[   24.333646] Allocate Port Service[0000:00:01.0:pcie00]
[   24.333763] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   24.333823] assign_interrupt_mode Found MSI capability
[   24.333880] Allocate Port Service[0000:00:1c.0:pcie00]
[   24.333937] Allocate Port Service[0000:00:1c.0:pcie02]
[   24.334064] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   24.334125] assign_interrupt_mode Found MSI capability
[   24.334174] Allocate Port Service[0000:00:1c.1:pcie00]
[   24.334229] Allocate Port Service[0000:00:1c.1:pcie02]
[   24.334355] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[   24.334416] assign_interrupt_mode Found MSI capability
[   24.334465] Allocate Port Service[0000:00:1c.2:pcie00]
[   24.334521] Allocate Port Service[0000:00:1c.2:pcie02]
[   24.334936] isapnp: Scanning for PnP cards...
[   24.688734] isapnp: No Plug & Play device found
[   24.734752] Real Time Clock Driver v1.12ac
[   24.734931] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   24.735050] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 8250
[   24.735235] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   24.737093] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   24.737203] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[   24.737380] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[   24.739398] i8042.c: Detected active multiplexing controller, rev 1.1.
[   24.740552] serio: i8042 KBD port at 0x60,0x64 irq 1
[   24.740560] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[   24.740564] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[   24.740569] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[   24.740573] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[   24.765247] mice: PS/2 mouse device common for all mice
[   24.765364] EISA: Probing bus 0 at eisa.0
[   24.765399] EISA: Detected 0 cards.
[   24.765403] cpuidle: using governor ladder
[   24.765405] cpuidle: using governor menu
[   24.765495] NET: Registered protocol family 1
[   24.765522] Using IPI No-Shortcut mode
[   24.765551] registered taskstats version 1
[   24.765665]   Magic number: 9:914:688
[   24.765748] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   24.765750] EDD information not available.
[   24.765940] Freeing unused kernel memory: 368k freed
[   24.765968] Write protecting the kernel read-only data: 806k
[   24.797598] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[   26.128986] fuse init (API version 7.9)
[   26.152220] ACPI: Transitioning device [FN00] to D3
[   26.152224] ACPI: Transitioning device [FN00] to D3
[   26.152227] ACPI: Fan [FN00] (off)
[   26.161342] ACPI: SSDT B7FC97B0, 0465 (r1    AMI   CPU1PM        1 INTL  2002026)
[   26.162481] ACPI: CPU0 (power states: C1[C1] C2[C2])
[   26.162489] ACPI: Processor [CPU1] (supports 8 throttling states)
[   26.162587] ACPI: SSDT B7FC9C20, 0465 (r1    AMI   CPU2PM        1 INTL  2002026)
[   26.163809] ACPI: CPU1 (power states: C1[C1] C2[C2])
[   26.163818] ACPI: Processor [CPU2] (supports 8 throttling states)
[   26.165882] ACPI: EC: non-query interrupt received, switching to interrupt mode
[   26.171805] ACPI: Thermal Zone [THRM] (102 C)
[   26.982830] r8169 Gigabit Ethernet driver 2.2LK loaded
[   26.982870] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   26.982900] PCI: Setting latency timer of device 0000:05:00.0 to 64
[   26.983507] eth0: RTL8168b/8111b at 0xf8854000, 00:17:31:2c:2a:2a, XID 30000000 IRQ 219
[   27.018434] usbcore: registered new interface driver usbfs
[   27.018483] usbcore: registered new interface driver hub
[   27.019096] usbcore: registered new device driver usb
[   27.041893] USB Universal Host Controller Interface driver v3.0
[   27.041996] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
[   27.042020] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   27.042027] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   27.042381] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[   27.042434] uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000e480
[   27.042727] usb usb1: configuration #1 chosen from 1 choice
[   27.042779] hub 1-0:1.0: USB hub found
[   27.042789] hub 1-0:1.0: 2 ports detected
[   27.147785] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
[   27.147803] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   27.147816] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   27.147865] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[   27.147916] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000e800
[   27.148152] usb usb2: configuration #1 chosen from 1 choice
[   27.148204] hub 2-0:1.0: USB hub found
[   27.148213] hub 2-0:1.0: 2 ports detected
[   27.179084] SCSI subsystem initialized
[   27.250472] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[   27.250490] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   27.250503] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   27.250548] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[   27.250599] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e880
[   27.250828] usb usb3: configuration #1 chosen from 1 choice
[   27.250896] hub 3-0:1.0: USB hub found
[   27.250905] hub 3-0:1.0: 2 ports detected
[   27.288908] libata version 3.00 loaded.
[   27.354317] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[   27.354336] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[   27.354349] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[   27.354422] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[   27.354465] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ec00
[   27.354693] usb usb4: configuration #1 chosen from 1 choice
[   27.354747] hub 4-0:1.0: USB hub found
[   27.354756] hub 4-0:1.0: 2 ports detected
[   27.458234] ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[   27.458369] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
[   27.458384] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[   27.458397] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   27.458447] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[   27.462372] ehci_hcd 0000:00:1d.7: debug port 1
[   27.462382] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[   27.462392] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe1ffc00
[   27.511074] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16]  MMIO=[fd5fe800-fd5fefff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[   27.516121] usb 2-2: new full speed USB device using uhci_hcd and address 2
[   27.525947] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   27.526200] usb usb5: configuration #1 chosen from 1 choice
[   27.526257] hub 5-0:1.0: USB hub found
[   27.526267] hub 5-0:1.0: 8 ports detected
[   27.629921] ata_piix 0000:00:1f.2: version 2.12
[   27.629938] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[   27.629987] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20
[   27.630047] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[   27.630598] scsi0 : ata_piix
[   27.630703] scsi1 : ata_piix
[   27.633224] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[   27.633230] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[   27.797070] ata1.00: ATA-7: FUJITSU MHV2080BH, 00000028, max UDMA/100
[   27.797084] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   27.814054] ata1.00: configured for UDMA/100
[   27.949217] usb 5-4: new high speed USB device using ehci_hcd and address 2
[   28.082961] usb 5-4: configuration #1 chosen from 1 choice
[   28.132736] ata2.00: ATAPI: TSSTcorpCD/DVDW TS-L632C, AS07, max UDMA/33
[   28.304384] ata2.00: configured for UDMA/33
[   28.304576] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHV2080B 0000 PQ: 0 ANSI: 5
[   28.314903] scsi 1:0:0:0: CD-ROM            TSSTcorp CD/DVDW TS-L632C AS07 PQ: 0 ANSI: 5
[   28.335792] Driver 'sd' needs updating - please use bus_type methods
[   28.335933] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[   28.335961] sd 0:0:0:0: [sda] Write Protect is off
[   28.335965] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   28.336002] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   28.336097] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[   28.336125] sd 0:0:0:0: [sda] Write Protect is off
[   28.336129] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   28.336172] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   28.336178]  sda:<4>Driver 'sr' needs updating - please use bus_type methods
[   28.414309]  sda1 sda2 < sda5 >
[   28.440901] sd 0:0:0:0: [sda] Attached SCSI disk
[   28.446867] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   28.446888] sr 1:0:0:0: Attached scsi generic sg1 type 5
[   28.508346] usb 4-1: new low speed USB device using uhci_hcd and address 2
[   28.509532] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[   28.509539] Uniform CD-ROM driver Revision: 3.20
[   28.509640] sr 1:0:0:0: Attached scsi CD-ROM sr0
[   28.683696] usb 4-1: configuration #1 chosen from 1 choice
[   28.710080] Attempting manual resume
[   28.710093] swsusp: Resume From Partition 8:5
[   28.710096] PM: Checking swsusp image.
[   28.710367] PM: Resume from disk failed.
[   28.716853] usbcore: registered new interface driver hiddev
[   28.729849] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.3/usb4/4-1/4-1:1.0/input/input2
[   28.740209] EXT3-fs: INFO: recovery required on readonly filesystem.
[   28.740220] EXT3-fs: write access will be enabled during recovery.
[   28.751075] input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.3-1
[   28.751108] usbcore: registered new interface driver usbhid
[   28.751115] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   28.783143] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00e0180003554fae]
[   35.836727] kjournald starting.  Commit interval 5 seconds
[   35.836758] EXT3-fs: sda1: orphan cleanup on readonly fs
[   36.218021] ext3_orphan_cleanup: deleting unreferenced inode 4244283
[   36.218106] ext3_orphan_cleanup: deleting unreferenced inode 860176
[   36.218121] EXT3-fs: sda1: 2 orphan inodes deleted
[   36.218124] EXT3-fs: recovery complete.
[   36.223314] EXT3-fs: mounted filesystem with ordered data mode.
[   45.148764] ip_tables: (C) 2000-2006 Netfilter Core Team
[   45.249243] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   46.443358] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   46.516371] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   46.755924] Linux agpgart interface v0.102
[   47.249066] iTCO_vendor_support: vendor-support=0
[   47.307175] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[   47.307407] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0860)
[   47.307497] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   47.491033] input: PC Speaker as /devices/platform/pcspkr/input/input3
[   47.625473] intel_rng: FWH not detected
[   47.670993] input: Power Button (FF) as /devices/virtual/input/input4
[   47.686344] ACPI: Power Button (FF) [PWRF]
[   47.686590] input: Lid Switch as /devices/virtual/input/input5
[   47.714809] ACPI: Lid Switch [LID]
[   47.714972] input: Sleep Button (CM) as /devices/virtual/input/input6
[   47.738275] ACPI: Sleep Button (CM) [SLPB]
[   47.738463] input: Power Button (CM) as /devices/virtual/input/input7
[   47.770211] ACPI: Power Button (CM) [PWRB]
[   47.981971] asus-laptop: Asus Laptop Support version 0.42
[   47.982584] asus-laptop:   A7J model detected
[   47.987921] Registered led device: asus:phone
[   48.840647] ricoh-mmc: Ricoh MMC Controller disabling driver
[   48.840653] ricoh-mmc: Copyright(c) Philip Langdale
[   48.840778] ricoh-mmc: Ricoh MMC controller found at 0000:01:01.2 [1180:0843] (rev 1)
[   48.840800] ricoh-mmc: Controller is now disabled.
[   49.080736] sdhci: Secure Digital Host Controller Interface driver
[   49.080742] sdhci: Copyright(c) Pierre Ossman
[   49.080845] sdhci: SDHCI controller found at 0000:01:01.1 [1180:0822] (rev 19)
[   49.080884] ACPI: PCI Interrupt 0000:01:01.1[B] -> GSI 17 (level, low) -> IRQ 17
[   49.080913] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
[   49.081031] mmc0: SDHCI at 0xfd5ff000 irq 17 DMA
[   49.307936] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.0
[   49.307943] iwl3945: Copyright(c) 2003-2007 Intel Corporation
[   49.308101] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[   49.308126] PCI: Setting latency timer of device 0000:04:00.0 to 64
[   49.308164] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[   49.412411] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[   49.776110] [fglrx]   vendor: 1002 device: 71c5 count: 1
[   49.776232] [fglrx] Maximum main memory to use for locked dma buffers: 2771 MBytes.
[   49.778925] [fglrx] PAT is enabled successfully!
[   49.779043] [fglrx] module loaded - fglrx 8.50.3 [Jun  2 2008] with 1 minors
[   49.891418] ACPI: AC Adapter [AC0] (on-line)
[   49.909907] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008
[   49.949992] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[   49.971709] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input9
[   49.997739] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   49.998499] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input10
[   50.029676] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   50.063158] ACPI: Battery Slot [BAT0] (battery present)
[   50.945450] Linux video capture interface: v2.00
[   51.078624] stk11xx: Syntek USB2.0 webcam driver startup
[   51.078725] stk11xx: Syntek USB2.0 - STK-1135 based webcam found.
[   51.078730] stk11xx: Syntek AVStream USB2.0 1.3M WebCam - Product ID 0xA311.
[   51.078741] stk11xx: Release: 0005
[   51.078744] stk11xx: Number of interfaces : 1
[   51.080592] stk11xx: Initialize USB2.0 Syntek Camera
[   51.138802] irda_init()
[   51.138834] NET: Registered protocol family 23
[   51.305387] stk11xx: Syntek USB2.0 Camera is ready
[   51.305474] stk11xx: Syntek USB2.0 Camera is now controlling video device /dev/video0
[   51.305530] usbcore: registered new interface driver usb_stk11xx_driver
[   51.305535] stk11xx: v1.3.1 : Syntek USB Video Camera
[   52.983398] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[   52.983440] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   53.026417] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
[   53.046675] wmaster0: Selected rate control algorithm 'iwl-3945-rs'
[   53.540223] lp: driver loaded but no devices found
[   53.778352] Adding 3229024k swap on /dev/sda5.  Priority:-1 extents:1 across:3229024k
[   54.340309] EXT3 FS on sda1, internal journal
[   54.544360] device-mapper: uevent: version 1.0.3
[   54.544398] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
[   56.587988] No dock devices found.
[   58.072017] apm: BIOS not found.
[   58.370196] ppdev: user-space parallel port driver
[   58.603526] audit(1233412807.252:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5493 profile="/usr/sbin/cupsd" namespace="default"
[   62.185415] r8169: eth0: link down
[   62.335268] Bluetooth: Core ver 2.11
[   62.335399] NET: Registered protocol family 31
[   62.335402] Bluetooth: HCI device and connection manager initialized
[   62.335409] Bluetooth: HCI socket layer initialized
[   62.399843] Bluetooth: L2CAP ver 2.9
[   62.399852] Bluetooth: L2CAP socket layer initialized
[   62.538203] Bluetooth: RFCOMM socket layer initialized
[   62.538226] Bluetooth: RFCOMM TTY layer initialized
[   62.538229] Bluetooth: RFCOMM ver 1.8
[   63.354940] NET: Registered protocol family 17
[   65.658678] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   67.540098] [fglrx] Reserved FB block: Shared offset:0, size:1000000 
[   67.540107] [fglrx] Reserved FB block: Unshared offset:7ffb000, size:5000 
[   67.540111] [fglrx] Reserved FB block: Unshared offset:ffbf000, size:40000 
[   67.540116] [fglrx] Reserved FB block: Unshared offset:ffff000, size:1000 
[  147.544325] NET: Registered protocol family 10
[  147.544843] lo: Disabled Privacy Extensions
[  147.545799] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  147.546804] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  157.401084] CPU0 attaching NULL sched-domain.
[  157.401096] CPU1 attaching NULL sched-domain.
[  157.426454] CPU0 attaching sched-domain:
[  157.426462]  domain 0: span 03
[  157.426465]   groups: 01 02
[  157.426473] CPU1 attaching sched-domain:
[  157.426476]  domain 0: span 03
[  157.426480]   groups: 02 01
[  171.800023] wlan0: Initial auth_alg=0
[  171.800030] wlan0: authenticate with AP 00:1a:6b:e8:b8:c3
[  171.801596] wlan0: RX authentication from 00:1a:6b:e8:b8:c3 (alg=0 transaction=2 status=0)
[  171.801602] wlan0: authenticated
[  171.801607] wlan0: associate with AP 00:1a:6b:e8:b8:c3
[  171.803627] wlan0: RX AssocResp from 00:1a:6b:e8:b8:c3 (capab=0x411 status=0 aid=1)
[  171.803633] wlan0: associated
[  171.803690] wlan0: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 burst=0
[  171.803694] wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0
[  171.803699] wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30
[  171.803703] wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15
[  171.805647] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  188.960058] wlan0: no IPv6 routers present
[  192.037347] Inbound IN=wlan0 OUT= MAC=00:13:02:33:4c:85:00:1b:bf:42:44:34:08:00 SRC=93.186.176.224 DST=192.168.1.10 LEN=60 TOS=0x00 PREC=0x00 TTL=49 ID=65231 DF PROTO=TCP SPT=34961 DPT=6891 WINDOW=5840 RES=0x00 SYN URGP=0 
[  204.484861] Inbound IN=wlan0 OUT= MAC=00:13:02:33:4c:85:00:1b:bf:42:44:34:08:00 SRC=212.63.206.35 DST=192.168.1.10 LEN=54 TOS=0x00 PREC=0x00 TTL=49 ID=9472 DF PROTO=TCP SPT=4242 DPT=54891 WINDOW=6432 RES=0x00 ACK PSH URGP=0 
[  206.491838] Inbound IN=wlan0 OUT= MAC=00:13:02:33:4c:85:00:1b:bf:42:44:34:08:00 SRC=212.63.206.35 DST=192.168.1.10 LEN=54 TOS=0x00 PREC=0x00 TTL=49 ID=9474 DF PROTO=TCP SPT=4242 DPT=54891 WINDOW=6432 RES=0x00 ACK PSH URGP=0 
[  209.166292] Inbound IN=wlan0 OUT= MAC=00:13:02:33:4c:85:00:1b:bf:42:44:34:08:00 SRC=212.63.206.35 DST=192.168.1.10 LEN=54 TOS=0x00 PREC=0x00 TTL=49 ID=9475 DF PROTO=TCP SPT=4242 DPT=54891 WINDOW=6432 RES=0x00 ACK PSH URGP=0 
[  214.515448] Inbound IN=wlan0 OUT= MAC=00:13:02:33:4c:85:00:1b:bf:42:44:34:08:00 SRC=212.63.206.35 DST=192.168.1.10 LEN=54 TOS=0x00 PREC=0x00 TTL=49 ID=9476 DF PROTO=TCP SPT=4242 DPT=54891 WINDOW=6432 RES=0x00 ACK PSH URGP=0 
[  225.223786] Inbound IN=wlan0 OUT= MAC=00:13:02:33:4c:85:00:1b:bf:42:44:34:08:00 SRC=212.63.206.35 DST=192.168.1.10 LEN=54 TOS=0x00 PREC=0x00 TTL=49 ID=9477 DF PROTO=TCP SPT=4242 DPT=54891 WINDOW=6432 RES=0x00 ACK PSH URGP=0 
[  246.632484] Inbound IN=wlan0 OUT= MAC=00:13:02:33:4c:85:00:1b:bf:42:44:34:08:00 SRC=212.63.206.35 DST=192.168.1.10 LEN=54 TOS=0x00 PREC=0x00 TTL=49 ID=9478 DF PROTO=TCP SPT=4242 DPT=54891 WINDOW=6432 RES=0x00 ACK PSH URGP=0 
[  289.446076] Inbound IN=wlan0 OUT= MAC=00:13:02:33:4c:85:00:1b:bf:42:44:34:08:00 SRC=212.63.206.35 DST=192.168.1.10 LEN=54 TOS=0x00 PREC=0x00 TTL=49 ID=9479 DF PROTO=TCP SPT=4242 DPT=54891 WINDOW=6432 RES=0x00 ACK PSH URGP=0 
[  375.077560] Inbound IN=wlan0 OUT= MAC=00:13:02:33:4c:85:00:1b:bf:42:44:34:08:00 SRC=212.63.206.35 DST=192.168.1.10 LEN=54 TOS=0x00 PREC=0x00 TTL=49 ID=9480 DF PROTO=TCP SPT=4242 DPT=54891 WINDOW=6432 RES=0x00 ACK PSH URGP=0 
[  494.900649] Inbound IN=wlan0 OUT= MAC=00:13:02:33:4c:85:00:1b:bf:42:44:34:08:00 SRC=212.63.206.35 DST=192.168.1.10 LEN=54 TOS=0x00 PREC=0x00 TTL=49 ID=9481 DF PROTO=TCP SPT=4242 DPT=54891 WINDOW=6432 RES=0x00 ACK PSH URGP=0 
[  614.721826] Inbound IN=wlan0 OUT= MAC=00:13:02:33:4c:85:00:1b:bf:42:44:34:08:00 SRC=212.63.206.35 DST=192.168.1.10 LEN=54 TOS=0x00 PREC=0x00 TTL=49 ID=9482 DF PROTO=TCP SPT=4242 DPT=54891 WINDOW=6432 RES=0x00 ACK PSH URGP=0 
[  734.542601] Inbound IN=wlan0 OUT= MAC=00:13:02:33:4c:85:00:1b:bf:42:44:34:08:00 SRC=212.63.206.35 DST=192.168.1.10 LEN=54 TOS=0x00 PREC=0x00 TTL=49 ID=9483 DF PROTO=TCP SPT=4242 DPT=54891 WINDOW=6432 RES=0x00 ACK PSH URGP=0 
[  854.364669] Inbound IN=wlan0 OUT= MAC=00:13:02:33:4c:85:00:1b:bf:42:44:34:08:00 SRC=212.63.206.35 DST=192.168.1.10 LEN=54 TOS=0x00 PREC=0x00 TTL=49 ID=9484 DF PROTO=TCP SPT=4242 DPT=54891 WINDOW=6432 RES=0x00 ACK PSH URGP=0 
[  974.185822] Inbound IN=wlan0 OUT= MAC=00:13:02:33:4c:85:00:1b:bf:42:44:34:08:00 SRC=212.63.206.35 DST=192.168.1.10 LEN=54 TOS=0x00 PREC=0x00 TTL=49 ID=9485 DF PROTO=TCP SPT=4242 DPT=54891 WINDOW=6432 RES=0x00 ACK PSH URGP=0 
[ 1094.002701] Inbound IN=wlan0 OUT= MAC=00:13:02:33:4c:85:00:1b:bf:42:44:34:08:00 SRC=212.63.206.35 DST=192.168.1.10 LEN=54 TOS=0x00 PREC=0x00 TTL=49 ID=9486 DF PROTO=TCP SPT=4242 DPT=54891 WINDOW=6432 RES=0x00 ACK PSH URGP=0 
[ 1213.826358] Inbound IN=wlan0 OUT= MAC=00:13:02:33:4c:85:00:1b:bf:42:44:34:08:00 SRC=212.63.206.35 DST=192.168.1.10 LEN=54 TOS=0x00 PREC=0x00 TTL=49 ID=9487 DF PROTO=TCP SPT=4242 DPT=54891 WINDOW=6432 RES=0x00 ACK PSH URGP=0 
[ 1324.269021] possible SYN flooding on port 4663. Sending cookies.
[ 2057.021091] Inbound IN=wlan0 OUT= MAC=00:13:02:33:4c:85:00:1b:bf:42:44:34:08:00 SRC=91.180.121.99 DST=192.168.1.10 LEN=40 TOS=0x00 PREC=0x00 TTL=112 ID=44393 DF PROTO=TCP SPT=13917 DPT=47670 WINDOW=60196 RES=0x00 ACK URGP=0 
[ 2070.641738] Inbound IN=wlan0 OUT= MAC=00:13:02:33:4c:85:00:1b:bf:42:44:34:08:00 SRC=91.180.121.99 DST=192.168.1.10 LEN=40 TOS=0x00 PREC=0x00 TTL=112 ID=48539 DF PROTO=TCP SPT=13917 DPT=47670 WINDOW=64512 RES=0x00 ACK URGP=0 
[ 4915.743009] usb 5-2: new high speed USB device using ehci_hcd and address 4
[ 4915.876349] usb 5-2: configuration #1 chosen from 1 choice
[ 4916.000387] usbcore: registered new interface driver libusual
[ 4916.024845] Initializing USB Mass Storage driver...
[ 4916.026601] scsi2 : SCSI emulation for USB Mass Storage devices
[ 4916.027614] usbcore: registered new interface driver usb-storage
[ 4916.027620] USB Mass Storage support registered.
[ 4916.027739] usb-storage: device found at 4
[ 4916.027742] usb-storage: waiting for device to settle before scanning
[ 4921.017871] usb-storage: device scan complete
[ 4921.018512] scsi 2:0:0:0: Direct-Access     WD       1600BEVExternal  1.02 PQ: 0 ANSI: 0
[ 4921.023209] sd 2:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
[ 4921.023952] sd 2:0:0:0: [sdb] Write Protect is off
[ 4921.023958] sd 2:0:0:0: [sdb] Mode Sense: 00 00 00 00
[ 4921.023963] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 4921.025197] sd 2:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
[ 4921.025948] sd 2:0:0:0: [sdb] Write Protect is off
[ 4921.025954] sd 2:0:0:0: [sdb] Mode Sense: 00 00 00 00
[ 4921.025958] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 4921.025965]  sdb: sdb1
[ 4921.080459] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 4921.080506] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 5199.169291] usb 5-2: USB disconnect, address 4

Réponse 17 / 35

bob031 Messages postés 8228 Statut Membre 473

salut,

je lance une autre piste de réflexion : j'ai remarqué que tu avais un processus zombie !

une "topo" sur Ubuntu Hardy Heron : https://www.paperblog.fr/665980/les-processus-zombies-sous-linux/

de la doc : http://web.archive.org/web/*/https://debian-administration.org/article/261/Finding_zombie_processes

patoche

salut !

j'ai regardé le 1er lien que tu m'a donné ! j'ai lancé la commande ps xaf mais je n'ai pas tout compris ! est ce que les zombies sont tous ceux qui dans la colonne TTY portent un point d'interrogation ( là j'en ai plein ) ou ce sont seulement ceux qui portent la lettre Z dans la colonne STAT !

veut tu que je poste tout le resultat ?

Réponse 18 / 35

bob031 Messages postés 8228 Statut Membre 473

ce sont seulement ceux qui portent la lettre Z oui !

top indiquait 1 processus zombie !

pour sortir tous les zombies en cours : ps -el | grep 'Z'

patoche

quand je rentre cette commande voila le resultat :

F S   UID   PID  PPID  C PRI  NI ADDR SZ WCHAN  TTY          TIME CMD
0 Z  1000  9324  7170  0  80   0 -     0 -      ?        00:00:00 xdg-open <defunct>

Réponse 19 / 35

bob031 Messages postés 8228 Statut Membre 473

à priori, je ne pense pas que le souci soit du côté du "zombie" ! désolé, je ne vois pas !

patoche

salut bobo !
j'y comprend plus rien a propos des zombies ! en regardant ce que ça pouvait engendrer sur le fonctionnement je pensais que s'était une bonne piste ! ce que je comprends pas c que dans top des fois j'ai ma présence d'un zombie alors qu'a d'autres moments il n'apparait plus !
bref je te remercie de m'avoir apporté un peu d'aide !

Réponse 20 / 35

dubcek Messages postés 18786 Date d'inscription Statut Contributeur Dernière intervention 5 641

est-ce que tu dois éteindre le pc comme dit au post 1 ? un reboot ne suffit pas ?

patoche

je l'éteind car pour moi s'était la manière la plus simple mais elle ne marche pas a tous les coups!
et j'avoue que je n'ai pas essayé le reboot ! ça fait pas longtemps que je tourne avec linux et je ne sais pas encore comment le rebooter !

patoche

je crois que je vais laisser tomber ! je pense que je vais pas tarder a changer mon disque dur ( ce n'est pas a cause de ce problème ) et je pense aussi revenir a windows xp !
merci aussi a toi pour ton aide !

bob031 Messages postés 8228 Statut Membre 473 > patoche

je pense aussi revenir a windows xp !

bouahhhhhhhhh ! enfin tu es libre de choisir l'OS que tu veux mais bon ...

essaie d'installer une autre distribution : Mandriva ou Fedora ! vois si le problème est toujours présent .....

nous sommes bien d'accord : Linux n'est pas Windows !

patoche > bob031 Messages postés 8228 Statut Membre

je sais !
mais voila mon imprimante n'est pas reconnue par linux et ma carte graphique ne permet pas d'activer le 3d !
donc pour ma part ça me pose des problèmes !
c'est sure que j'aime bien linux mais l'utilisation que je fais de mon ordi, je pense que xp me convient mieux !

Ralentissement brutal

35 réponses

Votre réponse

Discussions similaires

Newsletters