help for programming CAME remote control Solved

Question

Hello, I can't manage to program my second gate remote control of the brand CAME TAM 432SA. Does anyone have a detailed manual or a descriptive diagram? The manual is too simplistic to understand.

Geoffroy · Accepted Answer

Here is the methodology for programming a Came TOP 432 NA or 432 SA remote control:

To make your new remote control work, you need to code it as follows:
1- Press both buttons on the new remote control simultaneously until the
LED blinks faster. Release the buttons.
2- Press the first button: the LED lights up continuously.
3- Within 10 seconds, place your old remote control against your new
remote control (as shown in the diagram below: the nose of the old one against the bottom of the
new one) and press the first button on your old remote control. The new
remote control will blink 3 times: the operation is successful.
4- Release all buttons.
5- With the first button coded, repeat the same operation for the second button on the
remote control.
6- Check the proper functioning of your remote control.

If it does not work, contact Telecommande Express at 01 44 70 04 06.

alain · Answer

Hello, I have the same problem when I program the second one, it cancels the first one, I can't find the solution.

Karl · Answer

As a property manager, I order my CAME remotes from www.ergometal.com; I don't take the TAM model, contact them and they will be able to find a solution for you!

jmh · Answer

maybe a bit late but here it is
take the second remote (the one to be programmed) press the button to be used (the LED blinks)
when the LED stays on, release the button
take the already programmed remote, place it behind the second one, press the button
that you want to program and release it.
if your programming was successful, the LED on your second remote will blink 3 times.
and that's it
jmh

MissBip · Answer

Good evening,

To program a CAME TAM432SA remote control,
you have a step-by-step explanation with pictures here: http://www.sezam.fr/notices/programmation_telecommande_came-tam432sa.pdf

Have a nice evening!

franciscinsix · Answer

simply bravo  useful forum to avoid expenses  Francis

maruCraft · Answer

I'm doing the same procedure but the blank remote is not flashing!!! Has anyone ever had this kind of problem?? My remote is a CAME 432NA.

maruCraft · Answer

Sorry, I meant the remote doesn't validate the reception of the codes (no blinking 3 times).

Franck D · Answer

Thank you so much, I was starting to lose hope.

BIPBIP · Answer

How to program my 2nd AME TAM-432SA remote control Thank you for your response.

viinoz · Answer

Hello, put your first remote at the back of the second, press both at the same time, and you'll see they’ll connect.
One in your left hand, the other in your right hand, and press simultaneously on the right or left buttons, it’s the only way to transmit the data.
See you, Fred from Nantes.

jean-claude · Answer

If you want good advice, call a real pro, www.france-automatismes.com they're great, they have all the answers about remote controls and automation. see you!

lulu · Answer

Remote control CAME top432na at €26 http://www.comptoirelectrique.com

anita · Answer

Help!!! What to do if both remote controls aren't working anymore??? Thanks in advance!

astier simon · Answer

SUPER!!! It works on the first try, but let's not get worked up! Be sure to put the first remote underneath. WELL DONE and thank you, SIMON.

domi · Answer

Great for the link, I've been struggling for a quarter of an hour, you need to properly place the master remote on the one to be programmed.  Thank you.

misterbip · Answer

Miss Bip is really talented! I must have spent 2 hours in vain attempts and was finally saved by Miss Bip's diagrams. I am still astonished by the lack of explanations in the instructions that came with these beeps…

Olivier · Answer

Hello I have a problem with the commissioning of the 1st remote control 432NA during the installation of my motorization ...??? Thank you

vinoz-club · Answer

Here is the manual, or you press the button of the first left hand, take the news in the right hand, put it at the "bottom" of the first one while also pressing one of the buttons for 6 seconds.
http://www.sezam.fr/notices/programmation_telecommande_came-tam432sa.pdf

alex29 · Answer

Good evening,
Here’s the thing, I have a problem, I had a remote that stopped working and one that was fine.
But now the second one is running low on batteries.
I change the batteries and now, nothing, the red LED blinks, etc., but the garage door doesn’t open anymore. What to do??

joel · Answer

Hello,  I found a video to program the Top432NA remote on this site:  http://www.telecommande-express.com/telecommande+CAME+:+TOP432NA  Take note.

fadilate · Answer

Hello, you can find a notice at https://www.telecommande-express.com/telecommande+CAME+:+TOP432NA#notice  the video is quite well made! I managed to program my remote thanks to this video :)

Help for programming CAME remote control

22 answers

Sim card not recognized on galaxy a7

Cannot create a new email address on iphone

First pc tip:

Headset jack 3.5 mm (3.5mm)

Slow startup on asus vivobook after battery drained

Customize and sanctuarize your windows folder icons

Update w10 kb5122878 impossible

Trio gigaset a605h no longer works

Very slow computer

Outlook problem