Wifi Sous ubuntu

Résolu
Bonjour,
Slt tout le monde
Jé un probleme pour configurer le wifi sous ubuntu, c'es ke le wifi se detecte mé avec 0db et IP = 0.0.0.0. Mon pc est DELL Latitude 120L . jé tt essayé j sé pa cmt resoudre le prob si kkun peut m'aider svp et merci
Configuration: Windows XP
Internet Explorer 7.0

16 réponses

  1. Merci bcp Franzux pr la commande sudo aptitude install b43-fwcutter elle ma resolu le probleme, encore une foi merci bcp pr tn aide et bn chnce
    0
    1. wé jé redemaré ma donné ceci
      eth0 Link encap:Ethernet HWaddr 00:15:c5:6b:c7:f1
      UP BROADCAST MULTICAST MTU:1500 Metric:1
      Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
      TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
      collisions:0 lg file transmission:1000
      Octets reçus:0 (0.0 B) Octets transmis:0 (0.0 B)
      Interruption:19

      lo Link encap:Boucle locale
      inet adr:127.0.0.1 Masque:255.0.0.0
      adr inet6: ::1/128 Scope:Hôte
      UP LOOPBACK RUNNING MTU:16436 Metric:1
      Packets reçus:1636 erreurs:0 :0 overruns:0 frame:0
      TX packets:1636 errors:0 dropped:0 overruns:0 carrier:0
      collisions:0 lg file transmission:0
      Octets reçus:81800 (79.8 KB) Octets transmis:81800 (79.8 KB)
      0
      1. ifconfig me donne :
        eth0 Link encap:Ethernet HWaddr 00:15:c5:6b:c7:f1
        UP BROADCAST MULTICAST MTU:1500 Metric:1
        Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
        TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
        collisions:0 lg file transmission:1000
        Octets reçus:0 (0.0 B) Octets transmis:0 (0.0 B)
        Interruption:19

        lo Link encap:Boucle locale
        inet adr:127.0.0.1 Masque:255.0.0.0
        adr inet6: ::1/128 Scope:Hôte
        UP LOOPBACK RUNNING MTU:16436 Metric:1
        Packets reçus:1736 erreurs:0 :0 overruns:0 frame:0
        TX packets:1736 errors:0 dropped:0 overruns:0 carrier:0
        collisions:0 lg file transmission:0
        Octets reçus:86800 (84.7 KB) Octets transmis:86800 (84.7 KB)
        0
        1. Contributeur
          Tu as redémarré le réseau avant de tenter le ifconfig ?
          0
      2. J'ai verifié l'existance des paquet et j'ai trouvé:
        wget 1.10.2
        libc6 2.7
        debconf 1.5.20


        la commande lspci me donne :

        00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
        00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
        00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
        00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03)
        00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
        00:1c.3 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 4 (rev 03)
        00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
        00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
        00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
        00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
        00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
        00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
        00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
        00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03)
        02:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
        02:03.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)

        J'attend votre reponse et Merci d'avance
        0
        1. Contributeur
          Un petit "ifconfig" ? ;)
          0
      3. slt , j'ai installé b43-fwcutter mé tjrs le meme prob ya pa de connexion
        0
        1. merci franz j vé essayé et t repondre apré
          cordialement
          0
          1. Contributeur
            Bon, dans un premier temps, il faut que tu vérifies que tu as bien les paquets suivants d'installés :

            - debconf (version supérieure à la 0.5) ou debconf-2.0
            - libc6 (version supérieure à 2.7-1)
            - wget

            Ensuite tu n'as qu'à télécharger et installer avec dpkg ce paquet

            Cordialement,

            Franz
            0
            1. le probleme c ke jé pa de connexion cable .pr l'installer?
              0
              1. Contributeur
                Ton pilote n'est pas installé :

                sudo aptitude install b43-fwcutter


                Cela devrait résoudre ton problème.
                0
                1. J n pa tapé k la command k vs mavé di lspci. jé pa compri ta dernier phrase : Par contre, il faut l'installer en tant que tel.
                  0
                  1. root@niharmine-laptop:~# lspci
                    00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
                    00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
                    00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
                    00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03)
                    00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
                    00:1c.3 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 4 (rev 03)
                    00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
                    00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
                    00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
                    00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
                    00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
                    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
                    00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
                    00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03)
                    02:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
                    02:03.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
                    root@niharmine-laptop:~# lo no wireless extensions.
                    bash: lo : commande introuvable
                    root@niharmine-laptop:~#
                    root@niharmine-laptop:~# eth0 no wireless extensions.
                    bash: eth0 : commande introuvable
                    root@niharmine-laptop:~#
                    root@niharmine-laptop:~# wmaster0 no wireless extensions.
                    bash: wmaster0 : commande introuvable
                    root@niharmine-laptop:~#
                    root@niharmine-laptop:~# wlan0 IEEE 802.11g ESSID:""
                    bash: wlan0 : commande introuvable
                    root@niharmine-laptop:~# Mode:Managed Channel:0 Access Point: Not-Associated
                    bash: Mode:Managed : commande introuvable
                    root@niharmine-laptop:~# Tx-Power=0 dBm
                    bash: Tx-Power=0 : commande introuvable
                    root@niharmine-laptop:~# Retry min limit:7 RTS thr:off Fragment thr=2346 B
                    bash: Retry : commande introuvable
                    root@niharmine-laptop:~# Encryption key:off
                    bash: Encryption : commande introuvable
                    root@niharmine-laptop:~# Link Quality:0 Signal level:0 Noise level:0
                    bash: Link : commande introuvable
                    root@niharmine-laptop:~# Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
                    bash: Rx : commande introuvable
                    root@niharmine-laptop:~# Tx excessive retries:0 Invalid misc:0 Missed beacon:0
                    0
                    1. Contributeur
                      C'est quoi les commandes que tu as tapées après ???

                      Ta carte wifi se trouve là :

                      02:03.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless

                      Par contre, il faut l'installer en tant que tel.
                      0
                  2. voila ce ki il me donne
                    eth0 Link encap:Ethernet HWaddr 00:15:c5:6b:c7:f1
                    UP BROADCAST MULTICAST MTU:1500 Metric:1
                    Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
                    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
                    collisions:0 lg file transmission:1000
                    Octets reçus:0 (0.0 B) Octets transmis:0 (0.0 B)
                    Interruption:19

                    lo Link encap:Boucle locale
                    inet adr:127.0.0.1 Masque:255.0.0.0
                    adr inet6: ::1/128 Scope:Hôte
                    UP LOOPBACK RUNNING MTU:16436 Metric:1
                    Packets reçus:1600 erreurs:0 :0 overruns:0 frame:0
                    TX packets:1600 errors:0 dropped:0 overruns:0 carrier:0
                    collisions:0 lg file transmission:0
                    Octets reçus:80000 (78.1 KB) Octets transmis:80000 (78.1 KB)
                    0
                    1. Contributeur
                      Donc aucune connexion wifi.

                      et que donne un "lspci" ?
                      0
                  3. ok atten j me connecte sous ubuntu
                    0
                    1. type de peripherik : carte MINI-PCI Dell wireless 1370. peut ill es reconnu car il me donne nom de connexion avec 0% de debit, merci pr tes reponses Franzux
                      0
                      1. Contributeur
                        Ouvre un terminal, tape "ifconfig" et affiche le résultat ici s'il te plaît.
                        0
                    2. Wé jé configuré , c'es une connexion wifi sans clé , pt etre c le prob de pc mé je sé pa, car jé un ami il a installé ubuntu et directemen il es connecté sans prob.
                      0
                      1. Contributeur
                        Quel type de périphérique wifi utilises-tu ? Est-il bien reconnu ?
                        0
                    3. Contributeur
                      Tu as configuré ta connexion à ton point d'accès wifi ?
                      0