RMT-D231P Remote Control

Solved
Hello,
My remote control, due to a false maneuver, is no longer recognized by my SONY RDR-HX725 recorder-player. My RMT-D231P remote is set to DVD1 when it should be set to DVD3.
What should I do?
Is it another problem?
Will buying another remote of the same type solve the problem?

Configuration: Windows 7 / Internet Explorer 9.0

5 answers

  • Votes
  • Date
  • Descending date
  1. Thank you to pacavidéo
    I pressed stop and found the number displayed on the front
    I was able to reprogram the remote control
    Everything is back to normal
    1. Hello,
      you just need a universal remote to access the settings of the DVD recorder 3 and that's it.
      1. I can't access the player since the remote control is not recognized.
        It's probably the remote that's out of order.
        Thanks for the help.
        1. On the front panel, there is a "stop" button; just press it, and a number will be displayed on the panel.
      2. Thank you for your response. I followed the advice, but I couldn't get it recognized by the player-recorder.
        I have another question; When the player is turned on, should the sensor of the remote control listed as 8 in the manual on the front panel be on (red light)?
        1. You go to the burner menu, then settings. In this same menu, you will see
          basic
          video
          audio
          etc etc
          In the video line, go to "command mode" and validate dvd3 (if it’s already done, just leave it as is).
        2. 8 = Philips
          Sony it's 01
      3. For your remote control, the factory code is "01"
        so you just need to enter it again
        for that, at the bottom of your remote control, you have two small buttons
        the bottom one is a rectangle with an arrow
        the one above is a black square with a capital I
        so you just need to press (hold down) that one and enter the 01 using the numeric keys
        there you go