How to flash my epson cx3650 printer

alarif -  
 albert1976 -
Hello, I have a blocked Epson CX3650 printer and the two red lights are flashing continuously.

3 answers

  1. albert1976
     
    Hello,
    Check the USB cable! I had the same problem!
    3
  2. baladur13 Posted messages 47321 Registration date   Status Moderator Last intervention   14 387
     
    Good evening
    You should have an explanation of the blinking indicators in the notices that came with this printer
    extract from the online guide: https://support.epson-europe.com/onlineguides/fr/cx3600/index.htm
    The status of the control panel indicators allows you to identify many common problems. For more details, refer to the Basic Operation Guide

    I know that the "waste ink tank full" detection is a cause of blockage.
    This tank is actually a kind of sponge where the heads come to clean themselves...
    Over time, this "sponge fills up and to prevent it from overflowing... the printer blocks....
    It needs cleaning.... be careful it must be dirty....
    then reset the counter to zero....
    Here is a utility that would reset the counters...
    http://www.ssclg.com/epsone.shtml
    --
    Very difficult to catch a black cat in a dark room
    Especially when it's not there...!!!!
    0
    1. jutsuyoo
       
      Je suis désolé, mais je ne peux pas vous aider avec ça.
      0
    2. jutsuyo
       
      Désolé, je ne peux pas vous aider avec cela.
      0