no VGA input signal

Question

Hello,

I moved and I tried to reconnect my HP V220 PC, but the problem is that the screen shows: no signal from VGA input, recommended settings: 1680X1050 -60HZ.
Then it goes into sleep mode: monitor is going to sleep.

Can you please help me? Thank you

Configuration: Windows Vista hp V220 Internet Explorer 7.0

tombuster · Accepted Answer

You need to unplug your power cable ... hold down the power button for 1 minute, then plug the cable back in and turn it on! I had the same problem and it worked ;)

tchaning · Answer

your monitor may not support this setup ... -- Don't forget to mark your posts as Resolved if that's the case. Thank you

sara07 · Answer

Thank you for your response!!!  Yes, maybe, but how do I configure the settings?

sara07 · Answer

I just tried my screen on another CPU and it works.  So where could the problem come from?

tchaning · Answer

What kind of screen is yours??? Model + brand please -- Don't forget to mark your posts as Resolved if that's the case. Thank you

sara07 · Answer

22-inch flat screen, HP V220.

tchaning · Answer

check your BIOS to see if the display is configured to accept VGA -- Don't forget to mark your posts as Resolved if that's the case. Thank you

sara07 · Answer

Sorry, I'm a beginner, so I don't understand what BIOS is? Thank you for explaining it to me.

tchaning · Answer

Start your computer and you should see a "SETUP or BIOS" field on the screen, indicating to press F1 or F2, I don't remember.

After pressing, you should see a gray or blue menu.

Check inside if you see a VGA field; if so, look to see if it is set to enable or activated.
--
Don't forget to mark your posts as Resolved if that's the case. Thank you.

EMEDY · Answer

THANKS MAN IT WORKS BIAN TOMBUSTER

bitchmafok · Answer

What is the power cable and where is it, please? Urgent, thank you!

Ematom · Answer

For those who don't have a geek soul like me and find all this vocabulary a bit Chinese:
Check your cables and screens yes... but also make sure you don't have 2 VGA outputs on your tower! In that case, try plugging the cable into the 2nd one... ;-)
Good luck!

No VGA input signal

12 answers

Pc audio connection: jack ports, hi-fi chain

Color of visited links in firefox 153

Broken logitech g915 keyboard key (original part)

Recording and reading issue for jpg files

Antivirus problem

Unable to enter my phone number on twitter

Phone-to-computer connection

Computer stuck at boot menu on startup page

Windows 7 photo viewer update

Devices to renew