View original (French)

Démarrage "Le châssis a été ouvert"

Solved
br1dil Posted messages 26 Registration date   Status Member -  
 Erik -
Hello,

Following the addition of a graphics card on an ACER VERITON M661, I receive this message at startup, during boot, "chassis has been opened." To continue booting into XP, I must press the F1 key each time.
Is it possible to disable this message? I read something about removing a jumper or a setting in the BIOS, can someone tell me more?

Have a great day everyone
Configuration: Windows Vista Firefox 2.0.0.13

10 answers

  1.
    br1dil Posted messages 26 Registration date   Status Member 37
     
    Hello,

    Thank you for your responses. However, simply disabling it in the BIOS is not enough. You need to reset the chassis open status directly. Here's what I did.
    1) BIOS -> PC Health Status
    2) Alert Chassis Opened -> Clear

    I don't have the BIOS in front of me, so the terms may not be exact.

    In any case, thank you and see you soon.
    23
    1. Erik
       
      Thank you very much br1dil, that's exactly what needs to be done, at least for me. However, it's worth noting that there can be variations, but without your explanation, I wouldn't have looked in that part of the BIOS. In my BIOS, it was just below PC health status: Bios/Bios Security Features/Chassis opened warning. There, three options: Enable, Disable or Clear. Best of luck.
      1