View original (French)

Low ID on SFR Box

Solved/Closed
Overlander24 -  
Bonsoir, for the configuration of eMule, does anyone know which ports need to be opened and how to open them on the SFR Box? Thank you in advance for your information...

10 answers

  1. coucoufamily
    hi

    you need to go to the options tool in emule and select "first launch assistant for emule" then click on configure upnp ports wait a bit and normally emule will take care of opening the ports on your sfr box; if the operation was successful, connect to a server and normally you should be on high id. I just did it and it's working like a charm.
    38
    1. Arno
      Hello, I have an SFR box and when I connect to eMule, I have a Low ID. What steps should I take to change it to High ID? Thank you in advance.
      13
      1. CouNk

        Me, I have the SFR box and I would like to know how to open a port with it?

        2
        1. stangaciu
          Salut, I would like to know the port for Azureus for the SFR box, thank you.
          1
          2. raph
            To have a high ID, you just need to go and remove the firewall rule from the box (http://boxsfr/expert/fr/config_firewall.htm)
            Then, click TOOLS in eMule, FIRST RUN ASSISTANT and follow the instructions. I've been doing well for 6 months. Hi.
            0
            1. Dams63
              I can't access your link.
              1
          3. marion
            Bonjour, j'ai une petite question. Je résilie mon abonnement Club Internet car j'ai appris que c'étaient eux qui m'avaient bloqué l'accès à eMule, donc je voudrais me mettre chez SFR et est-ce que c'est la même chose pour eMule ? Merci.
            -1
            1. quidam
              And I suppose you will use eMule to download a spelling book?
              0
          4. Loohaa
            Hi,

            well, I'm in the same situation as you, I can't connect to eMule with my SFR box, I need to change the ports and I don't understand much... I wanted to know if you managed to configure it, and if so, if you could help me do it...
            I'll leave you my MSN khidaa@hotmail.com

            Thank you for your help

            LoO
            -2
            1. CHRISS28@hotmail.fr
              Ok, I confirm the thing about the "first launch of Emule," it's working great!! I'm going to do it on two PCs, it's TOP LEVEL! Contact me if you still have a problem, I'll try to help you as best as I can.. bye Chris
              -2
              1. mennock
                Hi, do you know how to open my ports for lphant because I'm on low ID while with my previous provider I was on high ID.
                Thanks
                0
              2. chavy
                Sorry, but I have the same issue; I can't configure my Neuf box.
                0
            2. thierry 7
              Hi, I'm encountering the same issue. When I connect, I'm always on low ID. Could it be the firewall of the SFR box that's causing the problem? If anyone has a solution, I'm all ears. Thank you.
              -3
              1. druilel
                Hello, I am currently with Orange Livebox for the internet and I would like to switch to SFR Box.
                I wanted to know if it works well?
                Thank you.
                -3
                1. xFury
                  absolutely not.
                  0
                2. foxy
                  It’s going well, I’ve been at theirs for a day now, cool, except that the TV decoder they provided doesn’t work, card issue, so no TV. Otherwise, it’s all good.
                  0
                3. joseg85
                  I don't know where Xfury went to see "absolutely not", there are two cases, either he's useless, or he doesn't know how to set up his box.
                  I'm with them, everything works wonderfully, I'm in the countryside, and they were one of the first to increase my X" speed compared to Neuf and Club-Internet, I even had the live box four years ago... so I know what I'm talking about.
                  Kind regards
                  0
                4. mennock
                  @joseg85Can you tell me how to open the ports for lphant with my SFR box?
                  Thank you
                  0