Demo starsat sr-x4000 stuck
adel
-
djams40 -
djams40 -
Good evening,
I have a Starsat SR-X4000 decoder. I have a problem with my decoder; it got stuck and it shows "on" but there is no configuration menu. Please respond urgently, I am stuck.
, I have a problem with my decoder; it got stuck and it shows "on" but there is no configuration menu. Please respond urgently, I am stuck.
I have a Starsat SR-X4000 decoder. I have a problem with my decoder; it got stuck and it shows "on" but there is no configuration menu. Please respond urgently, I am stuck.
, I have a problem with my decoder; it got stuck and it shows "on" but there is no configuration menu. Please respond urgently, I am stuck.
Configuration: Windows XP Internet Explorer 6.0
24 réponses
- 1
- 2
Suivant
Hello
Starsat Softwares
3329B 3329 C UpgradeTool 27 11 2007 1.2.01
Ali Full Upgrade 5.1 27 02 2008
Ali Keys Editor 2.0
Ali Keys Loader
Ali Mini Upgrade 5.0 22 02 2008
Ali Mini Upgrade 5.1 27 02 2008
Ali Mini Upgrade 5.2 14 05 2008
Ali System Upgrade 07 10 2007
Ali System Upgrade 14 06 2006
Ali System Upgrade 19 10 2007
Ali System Upgrade 22 01 2007
Ali Editor V4
Firm Info 1.00
Loader Sr-X120 & 130 & 150 & 200Ci
Loader Starsat 4000 & 4200D
Software Upgrade 1.02
Starsat 110 & 1300 & 1700 & 1800D
System Upgrade 09 26 2006
UpgradeTool Sr-X1300 & 1700 & 1800 Super
Repair Starsat 4000 & 4200 On Up9 Blocking
Download
http://membres.lycos.fr/krimo666/starsatsofts.html
Thank you
Starsat Softwares
3329B 3329 C UpgradeTool 27 11 2007 1.2.01
Ali Full Upgrade 5.1 27 02 2008
Ali Keys Editor 2.0
Ali Keys Loader
Ali Mini Upgrade 5.0 22 02 2008
Ali Mini Upgrade 5.1 27 02 2008
Ali Mini Upgrade 5.2 14 05 2008
Ali System Upgrade 07 10 2007
Ali System Upgrade 14 06 2006
Ali System Upgrade 19 10 2007
Ali System Upgrade 22 01 2007
Ali Editor V4
Firm Info 1.00
Loader Sr-X120 & 130 & 150 & 200Ci
Loader Starsat 4000 & 4200D
Software Upgrade 1.02
Starsat 110 & 1300 & 1700 & 1800D
System Upgrade 09 26 2006
UpgradeTool Sr-X1300 & 1700 & 1800 Super
Repair Starsat 4000 & 4200 On Up9 Blocking
Download
http://membres.lycos.fr/krimo666/starsatsofts.html
Thank you
Hello,
I have the same problem as you, have you found a solution? Thank you for responding to me
Regards
I have the same problem as you, have you found a solution? Thank you for responding to me
Regards
haffa12300@yahoo.fr
تطبيقات التحديث 4200 بالأجهزة ذات الرمز على المراقبة 2 2 التحديث
تشمل مجموعة من التكنولوجيا 3 أجهزة بها 4500 بمواصفات على المستوى التالي:
1- أجهزة جديدة مسجلة إلى UP9 ب4500 لتحديث 4000
-داخلة لاتجار التحسينات وتنقيحات 3 بشكل خاص الأخرى
2- المطلوبة للعضوية
3- التحويل القياسي بحيث تم إدراج تحولات 5 للعمل على. UP9
4- تحميل فقط للمستوى المنشود لاجتياز الطلبات على UP9 وفق المراحل
رمش تشغيل متواصلة بما يسمى
.............للتسجيل النهائيات على طرازstarksat Agi 4000 4200 5100 5200 أجهزتها Echolink 700 707 777 Truman -xtrem x2 100 200 300 Fte خدمات.....
تفاصيل للتحميل:
https://www.sendspace.com/file/otkmcx
https://www.sendspace.com/file/aqptm8
تطبيقات التحديث 4200 بالأجهزة ذات الرمز على المراقبة 2 2 التحديث
تشمل مجموعة من التكنولوجيا 3 أجهزة بها 4500 بمواصفات على المستوى التالي:
1- أجهزة جديدة مسجلة إلى UP9 ب4500 لتحديث 4000
-داخلة لاتجار التحسينات وتنقيحات 3 بشكل خاص الأخرى
2- المطلوبة للعضوية
3- التحويل القياسي بحيث تم إدراج تحولات 5 للعمل على. UP9
4- تحميل فقط للمستوى المنشود لاجتياز الطلبات على UP9 وفق المراحل
رمش تشغيل متواصلة بما يسمى
.............للتسجيل النهائيات على طرازstarksat Agi 4000 4200 5100 5200 أجهزتها Echolink 700 707 777 Truman -xtrem x2 100 200 300 Fte خدمات.....
تفاصيل للتحميل:
https://www.sendspace.com/file/otkmcx
https://www.sendspace.com/file/aqptm8
Good evening, I have the same issue with my demo from the same brand as yours, have you unlocked it? Please reply! Thank you.
Salut Rachid, I also have a Starsat 4000 SRX and I would like to know how to determine if the circuit is burnt and if it is worth repairing since I bought it in Algeria on December 28. I should mention that I know nothing about computers. Thank you for your help.
You can ask your questions here at www.berkanesat.com. There are technicians who can help you, and there are also flash software - mastersoft, as well as boots for your receivers.
Good luck!
Good luck!
Here is a place where you can find the solution to your problem.
The site tunisia-sat.com is one of the best sites in the field.
https://www.tunisia-sat.com/forums/threads/207696/
The site tunisia-sat.com is one of the best sites in the field.
https://www.tunisia-sat.com/forums/threads/207696/
I hope I can get a response; here is my problem: for a few weeks, I have had no signal intensity or quality, knowing that the problem does not come from the cable or the orientation of the satellite dish. Could the problem come directly from the dish? Should I change it? Thank you to everyone who can help; I would prefer not to buy a dish for no reason.
Hello,
you can connect the boot via cable and then flash it; if the EEPROM doesn’t respond, it needs to be reprogrammed by a technician who has a programmer.
you can connect the boot via cable and then flash it; if the EEPROM doesn’t respond, it needs to be reprogrammed by a technician who has a programmer.
Good evening everyone, I have a problem. I can't download my software on my Starsat X3500CUCI, whereas before it was charging. When I plug it in, it shows "load" for 5 seconds and then nothing happens; it just stops. Please help me, I can't do it anymore. Thank you in advance.
Salut, tu comprends que suite aux attaques satellites, ton démo est en panne. T’es pas le seul, c’est ces bâtards de CanalSat, c’est eux qui font ces attaques avec leur système par ultrason via satellite. Ils ont même détruit les démos de leurs abonnés. Faut pas être surpris, c’est leur stratégie pour conserver leurs abonnés.
I have a Starsat SR-X400D. It worked for a week and now it won't start anymore. It always displays ON. I tried to reflash it but it doesn't respond. The LOADER (with ALLCODE + BOOTLOADER) gets stuck on "test serial port status," which means it can't find the demo.
Can someone help me?
I read on some forums that the cause could be:
1- failed flashing
2- burnt resistor (!!!????)
Since the demo worked fine for a week, I wonder if reflashing could help. But I don't know which resistor to check. Everything looks normal at first glance.
I also read something about the JTAG cable. What is this cable like? Should I buy it or is there a plan to make one?
On this forum, I just read that a circuit may possibly be burnt. Does anyone have an idea of which circuit it might be?
Thank you for your help!
Ma7res
Can someone help me?
I read on some forums that the cause could be:
1- failed flashing
2- burnt resistor (!!!????)
Since the demo worked fine for a week, I wonder if reflashing could help. But I don't know which resistor to check. Everything looks normal at first glance.
I also read something about the JTAG cable. What is this cable like? Should I buy it or is there a plan to make one?
On this forum, I just read that a circuit may possibly be burnt. Does anyone have an idea of which circuit it might be?
Thank you for your help!
Ma7res
haffa12300@yahoo.fr
Device model: Starsat 4000
The company has launched a new device, less than a week ago.
For upgrades:
Your current subscription period includes the basic packages and the UP9 version is the one that supports 4000 channels.
- First, you should pay the necessary fees to upgrade your current subscription from 2 months to 3 months which gives you over additional access to all Aliminiupg channels.
2- Other devices we have include the Alimni, but the timing for your service is limited to 3 months on the .UP9
3- The device includes one month of credit which will allow you to connect with every supported channel and you will be able to use all types available on UP9 for the device.
4- Always make sure you have the necessary updates during the available time for support on the .UP9 devices for future plans.
Then the next month you will be able to see whether you have the correct hours
.............To make your tuning to Channels you can use: starsat Agi 4000 .4200.5100.5200 with this software for Echolink 700.707.777 Truman -xtrem x2 100 . 200.300 Fte updated.....
The team on the job:
Device model: Starsat 4000
The company has launched a new device, less than a week ago.
For upgrades:
Your current subscription period includes the basic packages and the UP9 version is the one that supports 4000 channels.
- First, you should pay the necessary fees to upgrade your current subscription from 2 months to 3 months which gives you over additional access to all Aliminiupg channels.
2- Other devices we have include the Alimni, but the timing for your service is limited to 3 months on the .UP9
3- The device includes one month of credit which will allow you to connect with every supported channel and you will be able to use all types available on UP9 for the device.
4- Always make sure you have the necessary updates during the available time for support on the .UP9 devices for future plans.
Then the next month you will be able to see whether you have the correct hours
.............To make your tuning to Channels you can use: starsat Agi 4000 .4200.5100.5200 with this software for Echolink 700.707.777 Truman -xtrem x2 100 . 200.300 Fte updated.....
The team on the job:
Hi Mehdi,
no it didn't help. As I already mentioned in my intervention, I have already tried this method but nothing happens: the LOADER remains on "test serial port status" and the DEMO on "ON".
When I turn on the receiver, it directly displays "ON". Whereas on another receiver that works (a super X5300CU), it first displays "boot" then "on" then "run".
Ma7res
no it didn't help. As I already mentioned in my intervention, I have already tried this method but nothing happens: the LOADER remains on "test serial port status" and the DEMO on "ON".
When I turn on the receiver, it directly displays "ON". Whereas on another receiver that works (a super X5300CU), it first displays "boot" then "on" then "run".
Ma7res
Hello
I have a problem with my Starsat, it shows "ash". Can you tell me a site where I can find the boot for the Starsat 4000d?
Thank you
I have a problem with my Starsat, it shows "ash". Can you tell me a site where I can find the boot for the Starsat 4000d?
Thank you
- 1
- 2
Suivant