View original (French)

NSE URC20-C4B Universal Remote Control Manual

sagesse -  
 Da -
Hello,
I lost the manual for my universal remote and I no longer have the codes. Can someone do something for me????
Thanks in advance.
Configuration: Windows XP Internet Explorer 6.0

7 answers

  1.
    jmp59 Posted messages 29286 Registration date   Status Contributor Last intervention   6 349
     
    Hello,
    You will find the translation into French of a manual in German HERE. At the beginning of the translation, there is a link to access the German manual that contains the list of codes.

    --
    To err is human, to persist is diabolical.
    26
  2. j59
     
    Hi, I have an NSE URC20 remote control
    how do I perform an automatic search for a Grandin TV
    I tried your method but it doesn't seem to work
    5
    1. Da
       

      Hello, I have a Thomson and I've lost the manual, could you please provide me with the code? Thank you.

      0
  3. sergio
     
    Hello,
    I lost the manual for my universal remote and I no longer have the codes. Can someone do something for me???? I have a Bluesky TV and I can't read English.
    Thank you in advance.
    3
  4. pdaddy2008
     
    Hello, I have a problem with my Blue Sky television, and I would like you to help me with the code for the universal remote controller URC 22B.
    1
  7. jmp59 Posted messages 29286 Registration date   Status Contributor Last intervention   6 349
     
    Hi, this is not my method but that of NSE!
    Your TV and this remote control are probably incompatible. Unfortunately, this is much more common than what the manufacturers of so-called universal remote controls claim. https://www.telecommandier.com/PBCPPlayer.asp?ID=55449

    --
    To err is human, to persist is diabolical.
    1
  8. rleone2222 Posted messages 2 Status Member 1
     
    Hello
    here is the programming procedure for a urc20 remote control
    manual code search
    1. turn on your device (for example, the TV)
    2. press the corresponding device selection button (TV, VCR, SAT...)
    3. press the FUNC button until the LED display lights up (± 2 seconds)
    4. press the Power button
    5. start your manual code search by pressing the VOL+ or VOL- button and aim the remote at the powered-on device.
    Each time the VOL+ or VOL- button is pressed, the remote will advance to the next code in the ascending or descending order in the code list.
    The LED display lights up for each code.
    Note: if the LED display blinks 3 times, you have reached the end or the beginning of the code list.
    6. if the device for which you are searching for the code turns off, it means the correct code has been reached: immediately press the FUNC button before the remote advances to the next code. The LED display blinks once to indicate that the code has been saved.

    hoping this can help
    regards
    -1