Défaut sur moniteur HP D5259A
williamme
Messages postés
9
Date d'inscription
Statut
Membre
Dernière intervention
-
williamme -
williamme -
Ceci pour faire remonter mon post de octobre 2002
sur un moniteur 17' Hewlett Packard D5259A
il y a le défaut suivant : Trop de largeur et défaut de coussin, ces réglages sont inopérants, tous les autres réglages sont efficaces.
Et répondre à Fil qui a posté le 01/09/2003 :
salut william
j'ai le meme pb que toi sur le hp d5259a, le code chassis est le suivant C7B de chez TATUNG, je n'ai toujours pas trouve la solution
as-tu toi trouve une solution ou bien le schema, si ta des infos sur cette panne sa m'interresse merci d'avance pour t'est reponses et a+
Et voici une réponse que j'ai reçu directement.
bonjour,
pour panne moniteur , remplacer la double diode DMV32 (repere D434) dispo chez http://www.electronique-diffusion.fr/
bon courage
Autrement sur des sites en anglais confrères de ccm, j'ai eu confirmation.
Je n'ai pas encore appliqué la solution (feignant va !)
QUESTION NO. P57-4: H.P. D5259a monitor has no width or pincushion control. All caps check OK and have found no shorts or opens.
First, HP has been marketing different chassis under the same model numbers, and D5259A is one of those models, so you are inviting problems if you do not also provide the chassis code (or FCC). For D5259A chassis C7B, I would check for reverse leakiness or shorts in Q470 or the modulator diode half of dual diode D434, and check out L471. If this gives no help, check the E/W signal out of pin 24 of IC401 = TDA9109, and if bad, try replacing the IC. If your D5259A is chassis C711, try checking D702 & D710.
http://www.anatekcorp.com/faq/archmntr.htm
QUESTION NO. P515-1: Hewlett Packard 5259A monitor Chassis C7B has no width or pincushion adjustment. Thanks to your tip, I found D434 (DMV32)leaky. My problem now is finding a replacement. Who carries this part and is there a substitute?
DMV32 (DMV32A, DMV32B, etc) dual diodes are in a TO220 case, rather than the TO3P or TO3PML cases often used for such duals. A possible sub is the Sanken FMP-2FUR, but it may be even harder to find. Try LJ Enterprises (www.ljent.com) or Nationwide (www.neiparts.com) for DMV32B.
Voili, l'ai-je bien descendu ?
sur un moniteur 17' Hewlett Packard D5259A
il y a le défaut suivant : Trop de largeur et défaut de coussin, ces réglages sont inopérants, tous les autres réglages sont efficaces.
Et répondre à Fil qui a posté le 01/09/2003 :
salut william
j'ai le meme pb que toi sur le hp d5259a, le code chassis est le suivant C7B de chez TATUNG, je n'ai toujours pas trouve la solution
as-tu toi trouve une solution ou bien le schema, si ta des infos sur cette panne sa m'interresse merci d'avance pour t'est reponses et a+
Et voici une réponse que j'ai reçu directement.
bonjour,
pour panne moniteur , remplacer la double diode DMV32 (repere D434) dispo chez http://www.electronique-diffusion.fr/
bon courage
Autrement sur des sites en anglais confrères de ccm, j'ai eu confirmation.
Je n'ai pas encore appliqué la solution (feignant va !)
QUESTION NO. P57-4: H.P. D5259a monitor has no width or pincushion control. All caps check OK and have found no shorts or opens.
First, HP has been marketing different chassis under the same model numbers, and D5259A is one of those models, so you are inviting problems if you do not also provide the chassis code (or FCC). For D5259A chassis C7B, I would check for reverse leakiness or shorts in Q470 or the modulator diode half of dual diode D434, and check out L471. If this gives no help, check the E/W signal out of pin 24 of IC401 = TDA9109, and if bad, try replacing the IC. If your D5259A is chassis C711, try checking D702 & D710.
http://www.anatekcorp.com/faq/archmntr.htm
QUESTION NO. P515-1: Hewlett Packard 5259A monitor Chassis C7B has no width or pincushion adjustment. Thanks to your tip, I found D434 (DMV32)leaky. My problem now is finding a replacement. Who carries this part and is there a substitute?
DMV32 (DMV32A, DMV32B, etc) dual diodes are in a TO220 case, rather than the TO3P or TO3PML cases often used for such duals. A possible sub is the Sanken FMP-2FUR, but it may be even harder to find. Try LJ Enterprises (www.ljent.com) or Nationwide (www.neiparts.com) for DMV32B.
Voili, l'ai-je bien descendu ?
A voir également:
- Défaut sur moniteur HP D5259A
- Hp usb disk storage format tool - Télécharger - Stockage
- Utiliser écran pc portable comme moniteur hdmi - Guide
- Télécharger pilote imprimante hp - Télécharger - Pilotes & Matériel
- Ouvrir avec par défaut - Guide
- Touchpad bloqué hp - Guide
6 réponses
again i also have a dead mon mod number D5259A chassis C-711 and upon a quick look i found resistor R754 andR764 completely fried along with what looks like D0703. NOw i noticed a well informed person(s) on this forum suggested looking at D0702 for this chassis and that was pretty close. I would like to request if someone could perhaps let me know the values for the components i had mentioned as they are cooked pretty bad and i dont have a schematic readily available to me. This would be greatly apppreciated if it is at all possible. Im not sure how long this thread has been open or if anyone will even read this but in case anyone can respond please email me at dan2pk@hotmail.com Again many many thanxs this is a great website too bad im not bilingual but i do know some spanish so im doing my best translating.............lol
again i also have a dead mon mod number D5259A chassis C-711 and upon a quick look i found resistor R754 andR764 completely fried along with what looks like D0703. NOw i noticed a well informed person(s) on this forum suggested looking at D0702 for this chassis and that was pretty close. I would like to request if someone could perhaps let me know the values for the components i had mentioned as they are cooked pretty bad and i dont have a schematic readily available to me. This would be greatly apppreciated if it is at all possible. Im not sure how long this thread has been open or if anyone will even read this but in case anyone can respond please email me at dan2pk@hotmail.com Again many many thanxs this is a great website too bad im not bilingual but i do know some spanish so im doing my best translating.............lol
Bonjour Dan2pk
Bonjour
Cela fait longtemps et je ne me souviens plus des valeurs et je n'ai plus l'écran qui a bien fonctionné.
J'ai trouvé les valeurs par essai successifs.
Je n'ai pas d'autres renseignements.
Bonne chance à toi
Buenos días Esto hace mucho tiempo y no me acuerdo más de valores y no tengo más la pantalla que funcionó bien.
Encontré los valores por prueba(ensayo) sucesivos.
No tengo otras informaciones.
Buena suerte te
Hello It makes for a long time and I do not remember any more values and I have no more the screen which worked well.
I found the values by try(essay) successive.
I have no other information.
Good luck to you
@+
Bonjour
Cela fait longtemps et je ne me souviens plus des valeurs et je n'ai plus l'écran qui a bien fonctionné.
J'ai trouvé les valeurs par essai successifs.
Je n'ai pas d'autres renseignements.
Bonne chance à toi
Buenos días Esto hace mucho tiempo y no me acuerdo más de valores y no tengo más la pantalla que funcionó bien.
Encontré los valores por prueba(ensayo) sucesivos.
No tengo otras informaciones.
Buena suerte te
Hello It makes for a long time and I do not remember any more values and I have no more the screen which worked well.
I found the values by try(essay) successive.
I have no other information.
Good luck to you
@+
Vous n’avez pas trouvé la réponse que vous recherchez ?
Posez votre question
Heu !
Bonjour Kely, excessivement sibyillin comme entrée en matière !
de quel modèle parles-tu ?
Si c'est le 5259A, je n'ai plus le schéma. j'avais cherché sur des sites russes et américain pour le trouver, car c'est un modèle commercialisé par plusieurs marques.
@+ et n'hésite pas à rajouter un soupçon de courtoisie dans tes communications, merci
Bonjour Kely, excessivement sibyillin comme entrée en matière !
de quel modèle parles-tu ?
Si c'est le 5259A, je n'ai plus le schéma. j'avais cherché sur des sites russes et américain pour le trouver, car c'est un modèle commercialisé par plusieurs marques.
@+ et n'hésite pas à rajouter un soupçon de courtoisie dans tes communications, merci