Five beeps on startup + black screen - Fujitsu Esprimo P910-L
SolvedGlitched067 Posted messages 3 Status Membre -
Hello, I have a Fujitsu Esprimo P910-L with Intel HD Graphics 2500 integrated graphics. Recently, I increased the video memory in the BIOS, but I accidentally changed the boot graphics card. I replaced [auto] with [IGD]. Since then, the PC has no display on the DVI-D port. The PC emits five beeps at startup and the fan starts normally. It shuts down after about 30 seconds. No access to the BIOS. I have no way to check the DisplayPort. I have checked all the components and found no issues.
Thank you in advance!
2 réponses
Hello everyone, just a quick update, I managed to reset the BIOS using the CMOS reset jumper. It was hidden in the Front Panel connector.
1. Unplug the PC.
2. Press and hold the power button for about 20 seconds.
3. Open the computer case. Locate the Front Panel connector.
4. Move the jumper (marked in gray) to the recovery position.
Wait 15 seconds.
5. Reposition the jumper to the normal position.
6. Plug in and start the PC.
Hello.
Unplug your PC from the power supply, remove the CR 2032 button battery from your motherboard, wait 10 minutes, put the battery back in your motherboard, plug your PC back into the power supply, start your PC.
bazfile
Moderator/Security Contributor.
A hello, a response, a thank you are always appreciated.