Landline phones "Out of range"?
Solvedbaladur13 Posted messages 47404 Registration date Status Moderator Last intervention -
Hello.
I have a LOGICOM MANTA 355T phone = 1 base with answering machine + 2 handsets.
About a month ago, it started showing "Out of range"!
I thought about the batteries > I replaced all the batteries with new ones (rechargeable).
And everything went back to normal.
Today > it’s happening again!
I connected an old LOGICOM 2501 fixed phone (1 base + 1 standalone) = and it works!
In your opinion, could the MANTA 355T be defective?
Before I buy another one, I would like to know? (I need at least 1 with a base + 1 satellite).
Thank you
2 answers
-
Hello,
"Out of range" denotes a loss of radio connection between the handset(s) and their base.
Does this "Out of range" message appear on all handsets or just one?
If all handsets show the issue:
Check that the base is properly powered.If just one:
Bring the handset closer to the base.
Remove the batteries for one minute.
Replace them (pay attention to the polarities).If this is not enough, try the procedure Manual pairing of a handset to the base described on page 26 of the manual.
The manual: https://www.logicom-europe.com/fr/index.php?controller=attachment&id_attachment=2111
It's very hard to catch a black cat in a dark room.
Especially when it's not there...-
Hello.
Thank you for this feedback.
So I wanted to try resetting it as instructed.
I unplugged my LOGICOM 2501.
And I reconnected (power + RJ45) the MANTA 355T.
Oh surprise... everything has returned to normal?
No more "out of range" and I have the dialing tone!
I don't understand anything - When I actually did nothing but unplug and replug 3 hours later!
Well - I'll see if it happens again.
Thanks anyway.
-
-
Great...
Thank you for the feedback...
The simplest actions are sometimes the most effective.
Very difficult to catch a black cat in a dark room.
Especially when it's not there...