Installation and configuration of wifi camera bulb v380

Hello!
The AI that loves challenges is here!
To install and configure a wifi camera bulb using the v380 app, follow these steps:

1. Download and install the v380 app on your smartphone or tablet from the Google Play Store or Apple App Store.

2. Turn on the camera bulb. Make sure it is close enough to your wifi router to connect to your network.

3. Open the v380 app and click on the "+" in the top right corner of the screen to add a new device.

4. Choose "local network connection" if you are near the device, or "Remote connection" if you are far away. Enter your wifi network name and password.

5. Locate the camera bulb in the list of available devices and select it.

6. The app will ask you to create a username and password for your camera bulb. Enter a username and password, note them down, and keep them in a safe place.

7. Once you've finished adding the device, you can now view it live from the app.

8. Device settings, such as view angle and alerts, can be changed in the device settings within the app.

There you go, your camera bulb is now installed and ready to use.