View original (French)

DTI Test Box

Closed
Carole49 -  
MPMP10 Posted messages 47331 Registration date   Status Member Last intervention   -
Hello, can someone tell me which wires need to be connected in the DTI box?

Thank you all in advance

Configuration: Android / Chrome 94.0.4606.85

1 answer

  1.
    jee pee Posted messages 31883 Registration date   Status Moderator Last intervention   9 979
     
    Hello,

    The DTI is used for the telephone/ADSL line.

    There are 2 wires (often white/grey) as input, and there can be 2 wires, 3, or 4 wires as output if the wall sockets are served directly from the DTI.

    You should send us a photo of the open DTI and specify what exactly you want to do.

    --
            a foreigner is a friend we haven't met yet.
    1
    1. jee pee Posted messages 31883 Registration date   Status Moderator Last intervention   9 979
       
      Here is an open DTI, with the telephone input in white/gray on the left
      and the output to a wall socket in yellow/orange on the right (we could connect 2 additional cables in the DTI to wire 3 wall sockets) here we have a PTT298 cable, if at the end it’s an RJ45 wall socket, the yellow/orange wires will be connected to positions 4 and 5 of the socket.
      0
      1. Seb > jee pee Posted messages 31883 Registration date   Status Moderator Last intervention  
         
        Hello, I would like to know where all the cables go: the pink, the blue, the brown, and the purple. When I wanted to look inside the DTI, there was only the gray and white cable connected, and since then I have not had internet. Thank you in advance.
        -2
      2. jee pee Posted messages 31883 Registration date   Status Moderator Last intervention   9 979 > Seb
         
        open a new question to detail your problem: https://forums.commentcamarche.net/forum/cablage-282/new

        because the DTI is only used for telephony/ADSL where 2 wires are sufficient, the others are not connected
        3
      3. Prescilla > jee pee Posted messages 31883 Registration date   Status Moderator Last intervention  
         

        How to fit the cables in?

        -1