1 réponse
It is feasible to create something (on Windows) where you will enter into a file the dimensions of the panels and their nature (walls, partitions, returns, etc.); for example:
Panel 1: partition width height
Panel 2: wall width height
Panel 3: return width height
Moreover, you will need to provide fixed parameters (dimensions of the boards, length of the rails, their spacing, the number of screws per linear meter, the amount of glue per m², length of the joint tape rolls, and others...?).
If you are on Windows, you can send the parameters.
Hoping that you are not taking the scraps from your sites.
Panel 1: partition width height
Panel 2: wall width height
Panel 3: return width height
Moreover, you will need to provide fixed parameters (dimensions of the boards, length of the rails, their spacing, the number of screws per linear meter, the amount of glue per m², length of the joint tape rolls, and others...?).
If you are on Windows, you can send the parameters.
Hoping that you are not taking the scraps from your sites.
But hey, if you come back around here, know that your software is on the right track, it just needs one piece of information: Is a plasterboard false ceiling mounted on rails or directly onto the frame?