View original (French)

CPL Issue It Works 500

AMCPL -  
Hello
The powerline indicator on the CPL 500 (IT Works)1 connected to the BBox no longer lights up after the addition of a CPL 750 to a CPL 500 network. There are still 2 out of 3 LEDs lit. The one for the powerline is not illuminated.
Request for assistance.
Thank you

1 answer

  1.  brupala
    Hello,
    he must have found himself disconnected when the added one paired with the main one.
    it needs to be repaired.

    --
    and ... there you go!
    1
    1. AMCPL
      Despite several attempts, the 3rd diode does not light up.
      On the other CPL, only the 1st one is blinking green.
      1
    2. brupala
      @AMCPLtry to unpair it (press and hold the button for 10 seconds) and re-pair all 3 together on a power strip.
      press and hold the button on each for 2 seconds.
      0
    3. AMCPL
      @brupalaI disappear 10s the CPL connected to the box?
      0
    4. brupala
      @AMCPLyes, why not ...
      then reconnect the 3 to a power strip, it's more convenient.
      0