Gigaset AS470H Cordless Handset AS470A
Domino
-
domino -
domino -
Hello,
I have a Gigaset AS470H phone with a AS470A handset. The battery doesn’t last, I thought it was due to the batteries and after changing them, it’s still the same. I put it on the base to charge and when it’s charged, I make a call and right away it discharges (white screen), but despite that I can talk for about 5 minutes and the battery discharges again. What should I do? Thank you
Configuration: Android / Chrome 85.0.4183.81
I have a Gigaset AS470H phone with a AS470A handset. The battery doesn’t last, I thought it was due to the batteries and after changing them, it’s still the same. I put it on the base to charge and when it’s charged, I make a call and right away it discharges (white screen), but despite that I can talk for about 5 minutes and the battery discharges again. What should I do? Thank you
Configuration: Android / Chrome 85.0.4183.81
4 answers
-
Hello Baladur13
I don’t have rechargeable batteries, but they are new and well placed. No button is stuck. The base is properly powered, with the light on, and when I put the phone on charge, I can hear the beep. The phone charges more slowly than usual. When it is charged and I make a call, there is a beep and the screen indicates low battery, but I can still talk for about 4 minutes before it cuts off, and I have to put it on charge again.-
No rechargeable batteries, just regular batteries...
You're living dangerously... Placing regular batteries on a charger can cause them to explode and even start a fire.
Excerpt from the notice on page 4:
So... remove the handset from the charger immediately... and tomorrow buy the appropriate rechargeable batteries.
Then we’ll see if the problem persists or not.
-
-
Hello,
The handset is AS470h and the phone is AS470A...
That said, if you have new rechargeable batteries (they need to be NiMH; size: AAA (Micro, HR03); voltage: 1.2 V; capacity: from 450 to 1000 mAh), well charged, the handset probably has an issue...
Check that no button is stuck
I assume the base is properly powered, with the light on if the answering machine is on.
Make sure that when you place the handset on the base, there is a characteristic beep.
Still, try to unplug everything... and remove the batteries from the handset...
wait a good minute, and put everything back in place... (be careful with the battery polarities, they must be inverted).
--
Very difficult to catch a black cat in a dark room.
Especially when it's not there... -
These are 2 batteries that I replaced in the phone and not in the base. I think that's what you understood correctly.
-
Ok thanks, I’m going to buy rechargeable batteries, and in the meantime, I’ve taken the phone off the base.