View original (French)

No program selection. echosonic receiver

Solved
halima -  
Andy31200 Posted messages 26918 Registration date   Status Moderator Last intervention   -
Hello, I bought an echosonic receiver a month ago and it was working well. Now when I turn it on, it shows me the message 'no program selection'. I don't know how to solve this problem. Thank you.

5 answers

  1.
    Andy31200 Posted messages 26918 Registration date   Status Moderator Last intervention   12 200
     
    Hello,
    Try unplugging everything, HDMI cables, antenna, and power plug, wait five minutes, and then plug them back in.
    If there's no result and if you have access to the menu, perform a "reset" or "factory reset" or "initial setup" (see menu), but you will have to redo the entire installation and settings.

    --
    I call a cat a cat *
         *in French in the text
    0
    1. halima
       
      Thank you very much.
      0
  2. matousurnet Posted messages 1179 Registration date   Status Member Last intervention   506
     
    Hello,

    Otherwise, warranty return (since purchased a month ago)
    0
  4. halima
     
    Finally, I was able to solve the problem thanks to the settings and parameters of the channels. Thank you very much.
    0
  6. Andy31200 Posted messages 26918 Registration date   Status Moderator Last intervention   12 200
     
    You're welcome, and feel free to come back if you have any other questions.

    --
    I call a spade a spade *
         *in French in the text
    0