View original (French)

Decoder assembly

AB -  
 ab -
Hello,

how to set up the Bercy B52 decoder with the two LNBs
I am counting on your expertise and sense of responsibility to help me.
Best regards

Configuration: Windows / Opera Next 65.0.3467.78

8 answers

  1.
    Andy31200 Posted messages 26918 Registration date   Status Moderator Last intervention   12 201
     
    Hello,
    Why two LNBs? To aim at two satellites,
    In that case, you need a diseqc switch and configure the decoder to switch between two satellites;


    I call a spade a spade *
         *in French in the text
    0
  2. ab
     
    Hello,
    Thank you very much for your help.
    0
  3. Andy31200 Posted messages 26918 Registration date   Status Moderator Last intervention   12 201
     
    But you're welcome, and is your problem solved?

    --
    I call a spade a spade *
    *in French in the text
    0
    1. ab
       
      Yes, it's working well, the installation is done.
      But for some channels it shows service unavailable and others have no signal. Also, when I connect certain channels do not display and other functions, but the image cuts off for a few seconds then appears. Can you explain the cause?
      0
  4. Andy31200 Posted messages 26918 Registration date   Status Moderator Last intervention   12 201
     
    "Service not available" = encrypted string?
    For the rest, apparently, wrong pointing of the satellite dish and/or wrong adjustment of cross-polarity

    --
    I call a spade a spade *
    *in French in the text
    0
  7. Andy31200 Posted messages 26918 Registration date   Status Moderator Last intervention   12 201
     
    In your question, you mentioned a sense of responsibility, so I will respond that no help with hacking can be provided on this forum and if you want to have encrypted channels, you should subscribe legally with the operator:
    https://www.commentcamarche.net/faq/17334-pourquoi-ccm-n-aide-pas-a-flasher-les-recepteurs-satellite

    --
    I call a cat a cat *
    *in French in the text
    0
  8. ab
     
    Sure, no problem, thank you very much for your help.
    0
  9. Andy31200 Posted messages 26918 Registration date   Status Moderator Last intervention   12 201
     
    But no problem, and feel free to come back for updates or if you have any other questions.

    --
    I call a spade a spade *
         *in French in the text
    0
    1. ab
       
      Alright, count on me.
      0