Sujet Précédent Sujet Suivant

Clé usb

Résolu/Fermé
dprave Messages postés 52 Date d'inscription jeudi 9 juin 2011 Statut Membre Dernière intervention 27 avril 2020 - 25 juil. 2019 à 06:26
dprave Messages postés 52 Date d'inscription jeudi 9 juin 2011 Statut Membre Dernière intervention 27 avril 2020 - 1 août 2019 à 21:25
Bonjour
Je suis sous unbuntu 18 et quand je branche une clé usb ou un dd externe (tout les deux reconnus sous Windows) il ne sont pas détectés tout mes ports fonctionnent parfaitement.
Auriez-vous une solution?
Merci
A voir également:

12 réponses

Réponse 1 / 12
Mentalink Messages postés 75 Date d'inscription dimanche 19 février 2017 Statut Membre Dernière intervention 22 février 2021 11
25 juil. 2019 à 13:10
Le système de fichier de ta clé USB n'est peut-être pas compatible avec Ubuntu. Il faut que tu regardes dans les propriétés de la clé si elle utilise le NTFS : dans ce cas, il faut formater la clé et choisir pour système de fichier le FAT32 (attention, en formatant la clé, les fichiers qu'elle contient sont perdus).
0
jns55
25 juil. 2019 à 14:34
Bonjour,
Linux sait parfaitement lire / écrire les partitions ntfs.

Qu'est-ce que tu veux dire avec "il ne sont pas détectés" ?
- Ils n'apparaissent pas dans le résultat de la commande lsusb ?
- Ils n'apparaissent pas dans le navigateur de fichiers ?

Ils peuvent très bien être détectés et ne pas apparaître dans le navigateur de fichiers s'ils ne sont pas montés.
0
Mentalink Messages postés 75 Date d'inscription dimanche 19 février 2017 Statut Membre Dernière intervention 22 février 2021 11 > jns55
25 juil. 2019 à 19:40
En effet, je n'ai rien dit, Linux aujourd'hui sait lire le NTFS. Je me suis très mal renseigné, désolé.
0
dprave Messages postés 52 Date d'inscription jeudi 9 juin 2011 Statut Membre Dernière intervention 27 avril 2020
Modifié le 27 juil. 2019 à 13:10
Salut
Quand je branche mes clés ou disque externe ils n’apparaissent pas à l’écran.
Je ne peux donc pas les ouvrire elles sont toutes en ntfs se qui fonctionné avant la mise à jour 18
0
Réponse 2 / 12
Malekal_morte- Messages postés 180304 Date d'inscription mercredi 17 mai 2006 Statut Modérateur, Contributeur sécurité Dernière intervention 15 décembre 2020 24 627
27 juil. 2019 à 12:57
Salut,

branche le disque ou clé USB.

Ouvre un terminal et tape : 
dmesg

donne le résultat.

puis : 

sudo fdisk -l


donne le résultat.
0
zipe31 Messages postés 36402 Date d'inscription dimanche 7 novembre 2010 Statut Contributeur Dernière intervention 27 janvier 2021 6 407
27 juil. 2019 à 13:08
Salut,

Avec les dernières distribs, 
dmesg
utilises l'option 
-w
qui permet de laisser le terminal ouvert et de voir au fur et à mesure ce qui se passe en direct.

Donc, ouvrir un terminal, lancer 
dmesg -w
et à partir de là brancher le périphérique.
0
Malekal_morte- Messages postés 180304 Date d'inscription mercredi 17 mai 2006 Statut Modérateur, Contributeur sécurité Dernière intervention 15 décembre 2020 24 627 > zipe31 Messages postés 36402 Date d'inscription dimanche 7 novembre 2010 Statut Contributeur Dernière intervention 27 janvier 2021
Modifié le 27 juil. 2019 à 13:20
ok je ne savais pas, je suis un peu old school.
Après dans les deux cas, on doit avoir l'infos.
Merci.
0
zipe31 Messages postés 36402 Date d'inscription dimanche 7 novembre 2010 Statut Contributeur Dernière intervention 27 janvier 2021 6 407 > Malekal_morte- Messages postés 180304 Date d'inscription mercredi 17 mai 2006 Statut Modérateur, Contributeur sécurité Dernière intervention 15 décembre 2020
27 juil. 2019 à 13:30
De rien. Mais effectivement, dans tous les cas le résultat est le même ;-)
Disons qu'avec 
dmesg -w
si tu rajoutes 2 ou 3 lignes vides (touche <Entrée>) tu peux mieux repérer à quel endroit commence l'ajout d'infos…
0
Malekal_morte- Messages postés 180304 Date d'inscription mercredi 17 mai 2006 Statut Modérateur, Contributeur sécurité Dernière intervention 15 décembre 2020 24 627 > zipe31 Messages postés 36402 Date d'inscription dimanche 7 novembre 2010 Statut Contributeur Dernière intervention 27 janvier 2021
27 juil. 2019 à 13:34
oui c'est comme un tail -f =)
0
zipe31 Messages postés 36402 Date d'inscription dimanche 7 novembre 2010 Statut Contributeur Dernière intervention 27 janvier 2021 6 407 > Malekal_morte- Messages postés 180304 Date d'inscription mercredi 17 mai 2006 Statut Modérateur, Contributeur sécurité Dernière intervention 15 décembre 2020
27 juil. 2019 à 13:36
Exactement. Je voulais le spécifier dans mon 1er message, puis je me suis ravisé ;-\
0
Réponse 3 / 12
dprave Messages postés 52 Date d'inscription jeudi 9 juin 2011 Statut Membre Dernière intervention 27 avril 2020
27 juil. 2019 à 13:29
Merci
Je fais ça dès que je peux
0
Réponse 4 / 12
gigi_dsss Messages postés 121 Date d'inscription dimanche 26 mai 2019 Statut Membre Dernière intervention 3 août 2020 12
27 juil. 2019 à 20:45
Je te propose ceci:
1. Débranche tes 2 périphériques de stockages
2. Ouvre un terminal
3. Ecrit: 
lsusb

4. Rebranche tes 2 périphériques...
5. Dans le même terminal écrit: 
lsusb


Envoie si possible le résultat dans 2 sections code diffèrentes:
<-code->resultat lsusb1<-/code->
<-code->resultat lsusb2<-/code->

!!! EFFACE LES '-' entre les <> (chevronnets) !!!
0

Vous n’avez pas trouvé la réponse que vous recherchez ?

Posez votre question
Réponse 5 / 12
dprave Messages postés 52 Date d'inscription jeudi 9 juin 2011 Statut Membre Dernière intervention 27 avril 2020
29 juil. 2019 à 07:19
Bonjour
Voila le résultat pour dmesg

<code>[ 0.000000] Linux version 4.18.0-25-generic (buildd@lcy01-amd64-025) (gcc version 8.3.0 (Ubuntu 8.3.0-6ubuntu1~18.10.1)) #26-Ubuntu SMP Mon Jun 24 09:32:08 UTC 2019 (Ubuntu 4.18.0-25.26-generic 4.18.20)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-25-generic root=UUID=4b80c91e-9484-43fa-8916-e8b53e78393a ro quiet splash vt.handoff=1
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009bbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009bc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dd04d3ff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dd04d400-0x00000000dd04f3ff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dd04f400-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed1bfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feda0000-0x00000000feda5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe60000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011bffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Dell Inc. Latitude E6400 /0W620R, BIOS A34 06/04/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] last_pfn = 0x11c000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D7FFF write-protect
[ 0.000000] D8000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 800000000 write-back
[ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 2 base 0DDC00000 mask FFFC00000 uncachable
[ 0.000000] 3 base 0DE000000 mask FFE000000 uncachable
[ 0.000000] 4 base 11C000000 mask FFC000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] total RAM covered: 32156M
[ 0.000000] gran_size: 64K chunk_size: 64K num_reg: 7 lose cover RAM: 28612M
[ 0.000000] gran_size: 64K chunk_size: 128K num_reg: 7 lose cover RAM: 28612M
[ 0.000000] gran_size: 64K chunk_size: 256K num_reg: 7 lose cover RAM: 28612M
[ 0.000000] gran_size: 64K chunk_size: 512K num_reg: 7 lose cover RAM: 28612M
[ 0.000000] gran_size: 64K chunk_size: 1M num_reg: 7 lose cover RAM: 28612M
[ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 7 lose cover RAM: 28612M
[ 0.000000] gran_size: 64K chunk_size: 4M num_reg: 7 lose cover RAM: 28612M
[ 0.000000] gran_size: 64K chunk_size: 8M num_reg: 7 lose cover RAM: 28608M
[ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 7 lose cover RAM: 28608M
[ 0.000000] gran_size: 64K chunk_size: 32M num_reg: 7 lose cover RAM: 28608M
[ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 7 lose cover RAM: 28224M
[ 0.000000] gran_size: 64K chunk_size: 128M num_reg: 7 lose cover RAM: 28160M
[ 0.000000] gran_size: 64K chunk_size: 256M num_reg: 7 lose cover RAM: 28160M
[ 0.000000] gran_size: 64K chunk_size: 512M num_reg: 7 lose cover RAM: 28160M
[ 0.000000] gran_size: 64K chunk_size: 1G num_reg: 7 lose cover RAM: 26G
[ 0.000000] gran_size: 64K chunk_size: 2G num_reg: 7 lose cover RAM: 24G
[ 0.000000] gran_size: 128K chunk_size: 128K num_reg: 7 lose cover RAM: 28612M
[ 0.000000] gran_size: 128K chunk_size: 256K num_reg: 7 lose cover RAM: 28612M
[ 0.000000] gran_size: 128K chunk_size: 512K num_reg: 7 lose cover RAM: 28612M
[ 0.000000] gran_size: 128K chunk_size: 1M num_reg: 7 lose cover RAM: 28612M
[ 0.000000] gran_size: 128K chunk_size: 2M num_reg: 7 lose cover RAM: 28612M
[ 0.000000] gran_size: 128K chunk_size: 4M num_reg: 7 lose cover RAM: 28612M
[ 0.000000] gran_size: 128K chunk_size: 8M num_reg: 7 lose cover RAM: 28608M
[ 0.000000] gran_size: 128K chunk_size: 16M num_reg: 7 lose cover RAM: 28608M
[ 0.000000] gran_size: 128K chunk_size: 32M num_reg: 7 lose cover RAM: 28608M
[ 0.000000] gran_size: 128K chunk_size: 64M num_reg: 7 lose cover RAM: 28224M
[ 0.000000] gran_size: 128K chunk_size: 128M num_reg: 7 lose cover RAM: 28160M
[ 0.000000] gran_size: 128K chunk_size: 256M num_reg: 7 lose cover RAM: 28160M
[ 0.000000] gran_size: 128K chunk_size: 512M num_reg: 7 lose cover RAM: 28160M
[ 0.000000] gran_size: 128K chunk_size: 1G num_reg: 7 lose cover RAM: 26G
[ 0.000000] gran_size: 128K chunk_size: 2G num_reg: 7 lose cover RAM: 24G
[ 0.000000] gran_size: 256K chunk_size: 256K num_reg: 7 lose cover RAM: 28612M
[ 0.000000] gran_size: 256K chunk_size: 512K num_reg: 7 lose cover RAM: 28612M
[ 0.000000] gran_size: 256K chunk_size: 1M num_reg: 7 lose cover RAM: 28612M
[ 0.000000] gran_size: 256K chunk_size: 2M num_reg: 7 lose cover RAM: 28612M
[ 0.000000] gran_size: 256K chunk_size: 4M num_reg: 7 lose cover RAM: 28612M
[ 0.000000] gran_size: 256K chunk_size: 8M num_reg: 7 lose cover RAM: 28608M
[ 0.000000] gran_size: 256K chunk_size: 16M num_reg: 7 lose cover RAM: 28608M
[ 0.000000] gran_size: 256K chunk_size: 32M num_reg: 7 lose cover RAM: 28608M
[ 0.000000] gran_size: 256K chunk_size: 64M num_reg: 7 lose cover RAM: 28224M
[ 0.000000] gran_size: 256K chunk_size: 128M num_reg: 7 lose cover RAM: 28160M
[ 0.000000] gran_size: 256K chunk_size: 256M num_reg: 7 lose cover RAM: 28160M
[ 0.000000] gran_size: 256K chunk_size: 512M num_reg: 7 lose cover RAM: 28160M
[ 0.000000] gran_size: 256K chunk_size: 1G num_reg: 7 lose cover RAM: 26G
[ 0.000000] gran_size: 256K chunk_size: 2G num_reg: 7 lose cover RAM: 24G
[ 0.000000] gran_size: 512K chunk_size: 512K num_reg: 7 lose cover RAM: 28612M
[ 0.000000] gran_size: 512K chunk_size: 1M num_reg: 7 lose cover RAM: 28612M
[ 0.000000] gran_size: 512K chunk_size: 2M num_reg: 7 lose cover RAM: 28612M
[ 0.000000] gran_size: 512K chunk_size: 4M num_reg: 7 lose cover RAM: 28612M
[ 0.000000] gran_size: 512K chunk_size: 8M num_reg: 7 lose cover RAM: 28608M
[ 0.000000] gran_size: 512K chunk_size: 16M num_reg: 7 lose cover RAM: 28608M
[ 0.000000] gran_size: 512K chunk_size: 32M num_reg: 7 lose cover RAM: 28608M
[ 0.000000] gran_size: 512K chunk_size: 64M num_reg: 7 lose cover RAM: 28224M
[ 0.000000] gran_size: 512K chunk_size: 128M num_reg: 7 lose cover RAM: 28160M
[ 0.000000] gran_size: 512K chunk_size: 256M num_reg: 7 lose cover RAM: 28160M
[ 0.000000] gran_size: 512K chunk_size: 512M num_reg: 7 lose cover RAM: 28160M
[ 0.000000] gran_size: 512K chunk_size: 1G num_reg: 7 lose cover RAM: 26G
[ 0.000000] gran_size: 512K chunk_size: 2G num_reg: 7 lose cover RAM: 24G
[ 0.000000] gran_size: 1M chunk_size: 1M num_reg: 7 lose cover RAM: 28612M
[ 0.000000] gran_size: 1M chunk_size: 2M num_reg: 7 lose cover RAM: 28612M
[ 0.000000] gran_size: 1M chunk_size: 4M num_reg: 7 lose cover RAM: 28612M
[ 0.000000] gran_size: 1M chunk_size: 8M num_reg: 7 lose cover RAM: 28608M
[ 0.000000] gran_size: 1M chunk_size: 16M num_reg: 7 lose cover RAM: 28608M
[ 0.000000] gran_size: 1M chunk_size: 32M num_reg: 7 lose cover RAM: 28608M
[ 0.000000] gran_size: 1M chunk_size: 64M num_reg: 7 lose cover RAM: 28224M
[ 0.000000] gran_size: 1M chunk_size: 128M num_reg: 7 lose cover RAM: 28160M
[ 0.000000] gran_size: 1M chunk_size: 256M num_reg: 7 lose cover RAM: 28160M
[ 0.000000] gran_size: 1M chunk_size: 512M num_reg: 7 lose cover RAM: 28160M
[ 0.000000] gran_size: 1M chunk_size: 1G num_reg: 7 lose cover RAM: 26G
[ 0.000000] gran_size: 1M chunk_size: 2G num_reg: 7 lose cover RAM: 24G
[ 0.000000] gran_size: 2M chunk_size: 2M num_reg: 7 lose cover RAM: 28612M
[ 0.000000] gran_size: 2M chunk_size: 4M num_reg: 7 lose cover RAM: 28612M
[ 0.000000] gran_size: 2M chunk_size: 8M num_reg: 7 lose cover RAM: 28608M
[ 0.000000] gran_size: 2M chunk_size: 16M num_reg: 7 lose cover RAM: 28608M
[ 0.000000] gran_size: 2M chunk_size: 32M num_reg: 7 lose cover RAM: 28608M
[ 0.000000] gran_size: 2M chunk_size: 64M num_reg: 7 lose cover RAM: 28224M
[ 0.000000] gran_size: 2M chunk_size: 128M num_reg: 7 lose cover RAM: 28160M
[ 0.000000] gran_size: 2M chunk_size: 256M num_reg: 7 lose cover RAM: 28160M
[ 0.000000] gran_size: 2M chunk_size: 512M num_reg: 7 lose cover RAM: 28160M
[ 0.000000] gran_size: 2M chunk_size: 1G num_reg: 7 lose cover RAM: 26G
[ 0.000000] gran_size: 2M chunk_size: 2G num_reg: 7 lose cover RAM: 24G
[ 0.000000] gran_size: 4M chunk_size: 4M num_reg: 7 lose cover RAM: 28612M
[ 0.000000] gran_size: 4M chunk_size: 8M num_reg: 7 lose cover RAM: 28608M
[ 0.000000] gran_size: 4M chunk_size: 16M num_reg: 7 lose cover RAM: 28608M
[ 0.000000] gran_size: 4M chunk_size: 32M num_reg: 7 lose cover RAM: 28608M
[ 0.000000] gran_size: 4M chunk_size: 64M num_reg: 7 lose cover RAM: 28224M
[ 0.000000] gran_size: 4M chunk_size: 128M num_reg: 7 lose cover RAM: 28160M
[ 0.000000] gran_size: 4M chunk_size: 256M num_reg: 7 lose cover RAM: 28160M
[ 0.000000] gran_size: 4M chunk_size: 512M num_reg: 7 lose cover RAM: 28160M
[ 0.000000] gran_size: 4M chunk_size: 1G num_reg: 7 lose cover RAM: 26G
[ 0.000000] gran_size: 4M chunk_size: 2G num_reg: 7 lose cover RAM: 24G
[ 0.000000] gran_size: 8M chunk_size: 8M num_reg: 7 lose cover RAM: 28612M
[ 0.000000] gran_size: 8M chunk_size: 16M num_reg: 7 lose cover RAM: 28612M
[ 0.000000] gran_size: 8M chunk_size: 32M num_reg: 7 lose cover RAM: 28612M
[ 0.000000] gran_size: 8M chunk_size: 64M num_reg: 7 lose cover RAM: 28228M
[ 0.000000] gran_size: 8M chunk_size: 128M num_reg: 7 lose cover RAM: 28164M
[ 0.000000] gran_size: 8M chunk_size: 256M num_reg: 7 lose cover RAM: 28164M
[ 0.000000] gran_size: 8M chunk_size: 512M num_reg: 7 lose cover RAM: 28164M
[ 0.000000] gran_size: 8M chunk_size: 1G num_reg: 7 lose cover RAM: 26628M
[ 0.000000] gran_size: 8M chunk_size: 2G num_reg: 7 lose cover RAM: 24580M
[ 0.000000] gran_size: 16M chunk_size: 16M num_reg: 7 lose cover RAM: 28364M
[ 0.000000] gran_size: 16M chunk_size: 32M num_reg: 7 lose cover RAM: 28620M
[ 0.000000] gran_size: 16M chunk_size: 64M num_reg: 7 lose cover RAM: 28236M
[ 0.000000] gran_size: 16M chunk_size: 128M num_reg: 7 lose cover RAM: 28172M
[ 0.000000] gran_size: 16M chunk_size: 256M num_reg: 7 lose cover RAM: 28172M
[ 0.000000] gran_size: 16M chunk_size: 512M num_reg: 7 lose cover RAM: 28172M
[ 0.000000] gran_size: 16M chunk_size: 1G num_reg: 7 lose cover RAM: 26636M
[ 0.000000] gran_size: 16M chunk_size: 2G num_reg: 7 lose cover RAM: 24588M
[ 0.000000] gran_size: 32M chunk_size: 32M num_reg: 7 lose cover RAM: 28252M
[ 0.000000] gran_size: 32M chunk_size: 64M num_reg: 7 lose cover RAM: 28252M
[ 0.000000] gran_size: 32M chunk_size: 128M num_reg: 7 lose cover RAM: 27676M
[ 0.000000] gran_size: 32M chunk_size: 256M num_reg: 7 lose cover RAM: 27676M
[ 0.000000] gran_size: 32M chunk_size: 512M num_reg: 7 lose cover RAM: 27676M
[ 0.000000] gran_size: 32M chunk_size: 1G num_reg: 7 lose cover RAM: 24604M
[ 0.000000] gran_size: 32M chunk_size: 2G num_reg: 7 lose cover RAM: 16412M
[ 0.000000] gran_size: 64M chunk_size: 64M num_reg: 7 lose cover RAM: 28252M
[ 0.000000] gran_size: 64M chunk_size: 128M num_reg: 7 lose cover RAM: 27676M
[ 0.000000] gran_size: 64M chunk_size: 256M num_reg: 7 lose cover RAM: 27676M
[ 0.000000] gran_size: 64M chunk_size: 512M num_reg: 7 lose cover RAM: 27676M
[ 0.000000] gran_size: 64M chunk_size: 1G num_reg: 7 lose cover RAM: 24604M
[ 0.000000] gran_size: 64M chunk_size: 2G num_reg: 7 lose cover RAM: 16412M
[ 0.000000] gran_size: 128M chunk_size: 128M num_reg: 7 lose cover RAM: 27804M
[ 0.000000] gran_size: 128M chunk_size: 256M num_reg: 7 lose cover RAM: 27804M
[ 0.000000] gran_size: 128M chunk_size: 512M num_reg: 7 lose cover RAM: 27804M
[ 0.000000] gran_size: 128M chunk_size: 1G num_reg: 7 lose cover RAM: 24732M
[ 0.000000] gran_size: 128M chunk_size: 2G num_reg: 7 lose cover RAM: 16540M
[ 0.000000] gran_size: 256M chunk_size: 256M num_reg: 7 lose cover RAM: 24988M
[ 0.000000] gran_size: 256M chunk_size: 512M num_reg: 7 lose cover RAM: 27036M
[ 0.000000] gran_size: 256M chunk_size: 1G num_reg: 7 lose cover RAM: 24988M
[ 0.000000] gran_size: 256M chunk_size: 2G num_reg: 7 lose cover RAM: 16796M
[ 0.000000] gran_size: 512M chunk_size: 512M num_reg: 7 lose cover RAM: 924M
[ 0.000000] gran_size: 512M chunk_size: 1G num_reg: 7 lose cover RAM: 924M
[ 0.000000] gran_size: 512M chunk_size: 2G num_reg: 7 lose cover RAM: 924M
[ 0.000000] gran_size: 1G chunk_size: 1G num_reg: 7 lose cover RAM: 9116M
[ 0.000000] gran_size: 1G chunk_size: 2G num_reg: 7 lose cover RAM: 924M
[ 0.000000] gran_size: 2G chunk_size: 2G num_reg: 7 lose cover RAM: 6044M
[ 0.000000] mtrr_cleanup: can not find optimal value
[ 0.000000] please specify mtrr_gran_size/mtrr_chunk_size
[ 0.000000] e820: update [mem 0xddc00000-0xffffffff] usable ==> reserved
[ 0.000000] e820: update [mem 0x11c000000-0x11fffffff] usable ==> reserved
[ 0.000000] last_pfn = 0xdd04d max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [(____ptrval____)] 95000 size 24576
[ 0.000000] BRK [0x55d60000, 0x55d60fff] PGTABLE
[ 0.000000] BRK [0x55d61000, 0x55d61fff] PGTABLE
[ 0.000000] BRK [0x55d62000, 0x55d62fff] PGTABLE
[ 0.000000] BRK [0x55d63000, 0x55d63fff] PGTABLE
[ 0.000000] BRK [0x55d64000, 0x55d64fff] PGTABLE
[ 0.000000] BRK [0x55d65000, 0x55d65fff] PGTABLE
[ 0.000000] BRK [0x55d66000, 0x55d66fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x332cb000-0x3595cfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FB9C0 000024 (v02 DELL )
[ 0.000000] ACPI: XSDT 0x00000000DD051E00 00006C (v01 DELL M09 27DD0604 ASL 00000061)
[ 0.000000] ACPI: FACP 0x00000000DD051C9C 0000F4 (v04 DELL M09 27DD0604 ASL 00000061)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20180531/tbfadt-569)
[ 0.000000] ACPI: DSDT 0x00000000DD052400 006E14 (v02 INT430 SYSFexxx 00001001 INTL 20050624)
[ 0.000000] ACPI: FACS 0x00000000DD060C00 000040
[ 0.000000] ACPI: FACS 0x00000000DD060C00 000040
[ 0.000000] ACPI: HPET 0x00000000DD051F00 000038 (v01 DELL M09 00000001 ASL 00000061)
[ 0.000000] ACPI: ____ 0x00000000DD060400 000030 (v01 DELL M09 27DD0604 ASL 00000061)
[ 0.000000] ACPI: APIC 0x00000000DD052000 000068 (v01 DELL M09 27DD0604 ASL 00000047)
[ 0.000000] ACPI: ASF! 0x00000000DD051C00 00006A (v32 DELL M09 27DD0604 ASL 00000061)
[ 0.000000] ACPI: MCFG 0x00000000DD051FC0 00003C (v16 DELL M09 27DD0604 ASL 00000061)
[ 0.000000] ACPI: TCPA 0x00000000DD052300 000032 (v01 00000000 ASL 00000000)
[ 0.000000] ACPI: SLIC 0x00000000DD05209C 000176 (v01 DELL M09 27DD0604 ASL 00000061)
[ 0.000000] ACPI: SSDT 0x00000000DD05032D 00066C (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011bffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x11bfd3000-0x11bffdfff]
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000011bffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009afff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000dd04cfff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000011bffffff]
[ 0.000000] Reserved but unavailable: 12313 pages
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011bffffff]
[ 0.000000] On node 0 totalpages: 1019879
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3994 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14082 pages used for memmap
[ 0.000000] DMA32 zone: 901197 pages, LIFO batch:31
[ 0.000000] Normal zone: 1792 pages used for memmap
[ 0.000000] Normal zone: 114688 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at [mem 0xde000000-0xdfffffff]
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009b000-0x0009bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdd04d000-0xdd04dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdd04e000-0xdd04efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdd04f000-0xdd04ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdd050000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfed17fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed9ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeda0000-0xfeda5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeda6000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee10000-0xffe5ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffe60000-0xffffffff]
[ 0.000000] [mem 0xe0000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x55a with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192 d28672 u1048576
[ 0.000000] pcpu-alloc: s151552 r8192 d28672 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1003920
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-25-generic root=UUID=4b80c91e-9484-43fa-8916-e8b53e78393a ro quiet splash vt.handoff=1
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3879764K/4079516K available (12300K kernel code, 2633K rwdata, 4244K rodata, 2456K init, 2336K bss, 199752K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 40830 entries in 160 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS: 524544, nr_irqs: 440, preallocated irqs: 16
[ 0.000000] vt handoff: transparent VT on vt#1
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20180531
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.020000] tsc: Fast TSC calibration using PIT
[ 0.024000] tsc: Detected 2394.034 MHz processor
[ 0.024000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x228233d704a, max_idle_ns: 440795325646 ns
[ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.06 BogoMIPS (lpj=9576136)
[ 0.024000] pid_max: default: 32768 minimum: 301
[ 0.024000] Security Framework initialized
[ 0.024000] Yama: becoming mindful.
[ 0.024000] AppArmor: AppArmor initialized
[ 0.024000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.024000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.024000] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.024000] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.024000] mce: CPU supports 6 MCE banks
[ 0.024000] CPU0: Thermal monitoring enabled (TM2)
[ 0.024000] process: using mwait in idle threads
[ 0.024000] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.024000] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.024000] Spectre V2 : Mitigation: Full generic retpoline
[ 0.024000] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.024000] Speculative Store Bypass: Vulnerable
[ 0.024000] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.024000] Freeing SMP alternatives memory: 36K
[ 0.036000] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz (family: 0x6, model: 0x17, stepping: 0xa)
[ 0.036000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.036000] ... version: 2
[ 0.036000] ... bit width: 40
[ 0.036000] ... generic registers: 2
[ 0.036000] ... value mask: 000000ffffffffff
[ 0.036000] ... max period: 000000007fffffff
[ 0.036000] ... fixed-purpose events: 3
[ 0.036000] ... event mask: 0000000700000003
[ 0.036000] Hierarchical SRCU implementation.
[ 0.036000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.036000] smp: Bringing up secondary CPUs ...
[ 0.036000] x86: Booting SMP configuration:
[ 0.036000] .... node #0, CPUs: #1
[ 0.036043] smp: Brought up 1 node, 2 CPUs
[ 0.036043] smpboot: Max logical packages: 1
[ 0.036043] smpboot: Total of 2 processors activated (9576.13 BogoMIPS)
[ 0.037986] devtmpfs: initialized
[ 0.037986] x86/mm: Memory block size: 128MB
[ 0.037986] PM: Registering ACPI NVS region [mem 0xdd04d400-0xdd04f3ff] (8192 bytes)
[ 0.037986] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.037986] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.037986] pinctrl core: initialized pinctrl subsystem
[ 0.037986] RTC time: 4:35:44, date: 07/29/19
[ 0.040106] NET: Registered protocol family 16
[ 0.040232] audit: initializing netlink subsys (disabled)
[ 0.040239] audit: type=2000 audit(1564374944.040:1): state=initialized audit_enabled=0 res=1
[ 0.040239] cpuidle: using governor ladder
[ 0.040239] cpuidle: using governor menu
[ 0.040239] ACPI: bus type PCI registered
[ 0.040239] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.040239] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.040239] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.040239] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[ 0.040239] PCI: Using configuration type 1 for base access
[ 0.041725] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.041725] ACPI: Added _OSI(Module Device)
[ 0.041725] ACPI: Added _OSI(Processor Device)
[ 0.041725] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.041725] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.041725] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.041725] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.050462] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.060174] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.064886] ACPI: Dynamic OEM Table Load:
[ 0.064894] ACPI: SSDT 0xFFFF904D5660A000 000281 (v01 PmRef BspIst 00003000 INTL 20050624)
[ 0.065357] ACPI: Dynamic OEM Table Load:
[ 0.065363] ACPI: SSDT 0xFFFF904D564F0000 0005C6 (v01 PmRef BspCst 00003001 INTL 20050624)
[ 0.066120] ACPI: Dynamic OEM Table Load:
[ 0.066125] ACPI: SSDT 0xFFFF904D565DF800 0001D7 (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.066417] ACPI: Dynamic OEM Table Load:
[ 0.066422] ACPI: SSDT 0xFFFF904D565C8C00 00008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.066893] ACPI: EC: EC started
[ 0.066894] ACPI: EC: interrupt blocked
[ 0.067663] ACPI: \_SB_.PCI0.ISAB.ECDV: Used as first EC
[ 0.067665] ACPI: \_SB_.PCI0.ISAB.ECDV: GPE=0x11, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.067667] ACPI: \_SB_.PCI0.ISAB.ECDV: Used as boot DSDT EC to handle transactions
[ 0.067668] ACPI: Interpreter enabled
[ 0.067689] ACPI: (supports S0 S3 S4 S5)
[ 0.067691] ACPI: Using IOAPIC for interrupt routing
[ 0.067719] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.068000] ACPI: Enabled 12 GPEs in block 00 to 3F
[ 0.262516] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.262523] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.262529] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.262541] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.279383] PCI host bridge to bus 0000:00
[ 0.279385] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.279387] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.279388] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.279390] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dffff window]
[ 0.279391] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff window]
[ 0.279393] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfebfffff window]
[ 0.279394] pci_bus 0000:00: root bus resource [mem 0xfec10000-0xfecfffff window]
[ 0.279396] pci_bus 0000:00: root bus resource [mem 0xfed1c000-0xfed1ffff window]
[ 0.279397] pci_bus 0000:00: root bus resource [mem 0xfed90000-0xfed9ffff window]
[ 0.279399] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.279400] pci_bus 0000:00: root bus resource [mem 0xfeda7000-0xfedfffff window]
[ 0.279402] pci_bus 0000:00: root bus resource [mem 0xfee10000-0xff9fffff window]
[ 0.279403] pci_bus 0000:00: root bus resource [mem 0xffc00000-0xffdfffff window]
[ 0.279405] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.279415] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[ 0.279441] DMAR: Forcing write-buffer flush capability
[ 0.279442] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.279562] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
[ 0.279575] pci 0000:00:02.0: reg 0x10: [mem 0xf6c00000-0xf6ffffff 64bit]
[ 0.279582] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.279587] pci 0000:00:02.0: reg 0x20: [io 0xef70-0xef77]
[ 0.279726] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
[ 0.279737] pci 0000:00:02.1: reg 0x10: [mem 0xf6b00000-0xf6bfffff 64bit]
[ 0.279882] pci 0000:00:03.0: [8086:2a44] type 00 class 0x078000
[ 0.279898] pci 0000:00:03.0: reg 0x10: [mem 0xf6ad9ef0-0xf6ad9eff 64bit]
[ 0.279948] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.280064] pci 0000:00:03.2: [8086:2a46] type 00 class 0x010185
[ 0.280079] pci 0000:00:03.2: reg 0x10: [io 0xef78-0xef7f]
[ 0.280085] pci 0000:00:03.2: reg 0x14: [io 0xef68-0xef6b]
[ 0.280091] pci 0000:00:03.2: reg 0x18: [io 0xef80-0xef87]
[ 0.280097] pci 0000:00:03.2: reg 0x1c: [io 0xef6c-0xef6f]
[ 0.280104] pci 0000:00:03.2: reg 0x20: [io 0xef90-0xef9f]
[ 0.280245] pci 0000:00:03.3: [8086:2a47] type 00 class 0x070002
[ 0.280259] pci 0000:00:03.3: reg 0x10: [io 0xef88-0xef8f]
[ 0.280265] pci 0000:00:03.3: reg 0x14: [mem 0xf6ada000-0xf6adafff]
[ 0.280459] pci 0000:00:19.0: [8086:10f5] type 00 class 0x020000
[ 0.280485] pci 0000:00:19.0: reg 0x10: [mem 0xf6ae0000-0xf6afffff]
[ 0.280496] pci 0000:00:19.0: reg 0x14: [mem 0xf6adb000-0xf6adbfff]
[ 0.280507] pci 0000:00:19.0: reg 0x18: [io 0xefe0-0xefff]
[ 0.280591] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.280712] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.280771] pci 0000:00:1a.0: reg 0x20: [io 0x6f60-0x6f7f]
[ 0.280944] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.281003] pci 0000:00:1a.1: reg 0x20: [io 0x6f80-0x6f9f]
[ 0.281173] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[ 0.281232] pci 0000:00:1a.2: reg 0x20: [io 0x6fa0-0x6fbf]
[ 0.281412] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.281438] pci 0000:00:1a.7: reg 0x10: [mem 0xfed1c400-0xfed1c7ff]
[ 0.281540] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.281676] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.281706] pci 0000:00:1b.0: reg 0x10: [mem 0xf6adc000-0xf6adffff 64bit]
[ 0.281811] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.281944] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.282058] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.282205] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[ 0.282318] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.282464] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
[ 0.282576] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.282726] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.282785] pci 0000:00:1d.0: reg 0x20: [io 0x6f00-0x6f1f]
[ 0.282954] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.283013] pci 0000:00:1d.1: reg 0x20: [io 0x6f20-0x6f3f]
[ 0.283186] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.283245] pci 0000:00:1d.2: reg 0x20: [io 0x6f40-0x6f5f]
[ 0.283422] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.283448] pci 0000:00:1d.7: reg 0x10: [mem 0xfed1c000-0xfed1c3ff]
[ 0.283550] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.283680] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.283876] pci 0000:00:1f.0: [8086:2917] type 00 class 0x060100
[ 0.284147] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
[ 0.284175] pci 0000:00:1f.2: reg 0x10: [io 0x6e70-0x6e77]
[ 0.284185] pci 0000:00:1f.2: reg 0x14: [io 0x6e78-0x6e7b]
[ 0.284196] pci 0000:00:1f.2: reg 0x18: [io 0x6e80-0x6e87]
[ 0.284206] pci 0000:00:1f.2: reg 0x1c: [io 0x6e88-0x6e8b]
[ 0.284217] pci 0000:00:1f.2: reg 0x20: [io 0x6ea0-0x6ebf]
[ 0.284228] pci 0000:00:1f.2: reg 0x24: [mem 0xfed1c800-0xfed1cfff]
[ 0.284290] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.284418] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.284444] pci 0000:00:1f.3: reg 0x10: [mem 0xf6ad9f00-0xf6ad9fff 64bit]
[ 0.284473] pci 0000:00:1f.3: reg 0x20: [io 0x1100-0x111f]
[ 0.284675] pci 0000:00:1c.0: PCI bridge to [bus 0b]
[ 0.284786] pci 0000:0c:00.0: [8086:4232] type 00 class 0x028000
[ 0.284847] pci 0000:0c:00.0: reg 0x10: [mem 0xf69fe000-0xf69fffff 64bit]
[ 0.285057] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
[ 0.285206] pci 0000:00:1c.1: PCI bridge to [bus 0c]
[ 0.285213] pci 0000:00:1c.1: bridge window [mem 0xf6900000-0xf69fffff]
[ 0.285290] pci 0000:00:1c.2: PCI bridge to [bus 0d]
[ 0.285325] pci_bus 0000:03: extended config space not accessible
[ 0.285384] pci 0000:03:01.0: [1180:0476] type 02 class 0x060700
[ 0.285396] pci 0000:03:01.0: proprietary Ricoh MMC controller disabled (via CardBus function)
[ 0.285397] pci 0000:03:01.0: MMC cards are now supported by standard SDHCI controller
[ 0.285417] pci 0000:03:01.0: reg 0x10: [mem 0x00000000-0x00000fff]
[ 0.285455] pci 0000:03:01.0: supports D1 D2
[ 0.285457] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.285536] pci 0000:03:01.1: [1180:0832] type 00 class 0x0c0010
[ 0.285556] pci 0000:03:01.1: reg 0x10: [mem 0xf68ff800-0xf68fffff]
[ 0.285650] pci 0000:03:01.1: supports D1 D2
[ 0.285652] pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.285722] pci 0000:03:01.2: [1180:0822] type 00 class 0x080501
[ 0.285742] pci 0000:03:01.2: reg 0x10: [mem 0xf68ff600-0xf68ff6ff]
[ 0.285835] pci 0000:03:01.2: supports D1 D2
[ 0.285836] pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.285954] pci 0000:00:1e.0: PCI bridge to [bus 03-04] (subtractive decode)
[ 0.285961] pci 0000:00:1e.0: bridge window [mem 0xf6800000-0xf68fffff]
[ 0.285968] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.285969] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.285971] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.285973] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dffff window] (subtractive decode)
[ 0.285974] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xf7ffffff window] (subtractive decode)
[ 0.285976] pci 0000:00:1e.0: bridge window [mem 0xfc000000-0xfebfffff window] (subtractive decode)
[ 0.285977] pci 0000:00:1e.0: bridge window [mem 0xfec10000-0xfecfffff window] (subtractive decode)
[ 0.285979] pci 0000:00:1e.0: bridge window [mem 0xfed1c000-0xfed1ffff window] (subtractive decode)
[ 0.285980] pci 0000:00:1e.0: bridge window [mem 0xfed90000-0xfed9ffff window] (subtractive decode)
[ 0.285982] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
[ 0.285984] pci 0000:00:1e.0: bridge window [mem 0xfeda7000-0xfedfffff window] (subtractive decode)
[ 0.285985] pci 0000:00:1e.0: bridge window [mem 0xfee10000-0xff9fffff window] (subtractive decode)
[ 0.285987] pci 0000:00:1e.0: bridge window [mem 0xffc00000-0xffdfffff window] (subtractive decode)
[ 0.286016] pci_bus 0000:04: extended config space not accessible
[ 0.286039] pci_bus 0000:04: busn_res: [bus 04] end can not be updated to 07
[ 0.286044] pci 0000:00:1e.0: bridge has subordinate 04 but max busn 07
[ 0.309526] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11)
[ 0.309666] ACPI: PCI Interrupt Link [LNKB] (IRQs *5 7)
[ 0.309806] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11)
[ 0.309945] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)
[ 0.310085] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.310227] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.310369] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.310492] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.313887] ACPI: EC: interrupt unblocked
[ 0.313917] ACPI: EC: event unblocked
[ 0.313943] ACPI: \_SB_.PCI0.ISAB.ECDV: GPE=0x11, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.313946] ACPI: \_SB_.PCI0.ISAB.ECDV: Used as boot DSDT EC to handle transactions and events
[ 0.314391] SCSI subsystem initialized
[ 0.314437] libata version 3.00 loaded.
[ 0.314437] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.314437] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.314437] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.314437] vgaarb: loaded
[ 0.314437] ACPI: bus type USB registered
[ 0.314437] usbcore: registered new interface driver usbfs
[ 0.314437] usbcore: registered new interface driver hub
[ 0.314437] usbcore: registered new device driver usb
[ 0.314437] pps_core: LinuxPPS API ver. 1 registered
[ 0.314437] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.314437] PTP clock support registered
[ 0.314437] EDAC MC: Ver: 3.0.0
[ 0.314437] PCI: Using ACPI for IRQ routing
[ 0.317321] PCI: pci_cache_line_size set to 64 bytes
[ 0.317402] e820: reserve RAM buffer [mem 0x0009bc00-0x0009ffff]
[ 0.317404] e820: reserve RAM buffer [mem 0xdd04d400-0xdfffffff]
[ 0.317538] NetLabel: Initializing
[ 0.317539] NetLabel: domain hash size = 128
[ 0.317540] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.317562] NetLabel: unlabeled traffic allowed by default
[ 0.317582] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.317582] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.317582] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.320133] clocksource: Switched to clocksource tsc-early
[ 0.340804] VFS: Disk quotas dquot_6.6.0
[ 0.340827] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.341007] AppArmor: AppArmor Filesystem Enabled
[ 0.341055] pnp: PnP ACPI init
[ 0.341192] pnp 00:00: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.341238] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.341283] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.341369] system 00:03: [io 0x0c80-0x0caf] has been reserved
[ 0.341371] system 00:03: [io 0x0cc0-0x0cff] could not be reserved
[ 0.341376] system 00:03: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.341487] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.341492] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.358891] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.374875] system 00:06: [io 0x0cb0-0x0cbb] has been reserved
[ 0.374878] system 00:06: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.374883] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.377624] system 00:07: [io 0x0900-0x092f] has been reserved
[ 0.377626] system 00:07: [io 0x0931-0x0933] has been reserved
[ 0.377628] system 00:07: [io 0x0935-0x097f] has been reserved
[ 0.377630] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.377632] system 00:07: [io 0x1000-0x1005] has been reserved
[ 0.377637] system 00:07: [io 0x1008-0x100f] has been reserved
[ 0.377642] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.377704] system 00:08: [io 0xf400-0xf4fe] has been reserved
[ 0.377706] system 00:08: [io 0x1006-0x1007] has been reserved
[ 0.377708] system 00:08: [io 0x100a-0x1059] could not be reserved
[ 0.377709] system 00:08: [io 0x1060-0x107f] has been reserved
[ 0.377711] system 00:08: [io 0x1080-0x10bf] has been reserved
[ 0.377713] system 00:08: [io 0x1100-0x111f] has been reserved
[ 0.377715] system 00:08: [io 0x1010-0x102f] has been reserved
[ 0.377716] system 00:08: [io 0x0809] has been reserved
[ 0.377721] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.400287] system 00:09: [mem 0x00000000-0x0009efff] could not be reserved
[ 0.400290] system 00:09: [mem 0x0009f000-0x0009ffff] could not be reserved
[ 0.400291] system 00:09: [mem 0x000c0000-0x000d7fff] could not be reserved
[ 0.400293] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.400295] system 00:09: [mem 0x00100000-0xdd04d3ff] could not be reserved
[ 0.400297] system 00:09: [mem 0xdd04d400-0xddafffff] could not be reserved
[ 0.400299] system 00:09: [mem 0xddb00000-0xddbfffff] has been reserved
[ 0.400301] system 00:09: [mem 0xffe00000-0xffffffff] could not be reserved
[ 0.400302] system 00:09: [mem 0xffa00000-0xffbfffff] has been reserved
[ 0.400304] system 00:09: [mem 0xfec00000-0xfec0ffff] could not be reserved
[ 0.400306] system 00:09: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.400308] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.400310] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.400312] system 00:09: [mem 0xfeda0000-0xfeda3fff] has been reserved
[ 0.400313] system 00:09: [mem 0xfeda4000-0xfeda4fff] has been reserved
[ 0.400315] system 00:09: [mem 0xfeda5000-0xfeda5fff] has been reserved
[ 0.400317] system 00:09: [mem 0xfeda6000-0xfeda6fff] has been reserved
[ 0.400319] system 00:09: [mem 0xfed1c800-0xfed1cfff] has been reserved
[ 0.400320] system 00:09: [mem 0xfed18000-0xfed1bfff] has been reserved
[ 0.400322] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.400328] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.402785] pnp: PnP ACPI: found 10 devices
[ 0.409232] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.409252] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 0b] add_size 1000
[ 0.409255] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 200000 add_align 100000
[ 0.409257] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 0b] add_size 200000 add_align 100000
[ 0.409267] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 0c] add_size 1000
[ 0.409269] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0c] add_size 200000 add_align 100000
[ 0.409280] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 0d] add_size 1000
[ 0.409282] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0d] add_size 200000 add_align 100000
[ 0.409284] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 0d] add_size 200000 add_align 100000
[ 0.409300] pci 0000:00:1e.0: bridge window [io 0x1000-0x0fff] to [bus 03-04] add_size 1000
[ 0.409314] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf01fffff]
[ 0.409321] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
[ 0.409328] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref]
[ 0.409330] pci 0000:00:1c.2: BAR 14: assigned [mem 0xf0600000-0xf07fffff]
[ 0.409336] pci 0000:00:1c.2: BAR 15: assigned [mem 0xf0800000-0xf09fffff 64bit pref]
[ 0.409339] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.409341] pci 0000:00:1c.1: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.409344] pci 0000:00:1c.2: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.409346] pci 0000:00:1e.0: BAR 13: assigned [io 0x5000-0x5fff]
[ 0.409351] pci 0000:00:1c.0: PCI bridge to [bus 0b]
[ 0.409354] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.409359] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff]
[ 0.409363] pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
[ 0.409370] pci 0000:00:1c.1: PCI bridge to [bus 0c]
[ 0.409373] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.409378] pci 0000:00:1c.1: bridge window [mem 0xf6900000-0xf69fffff]
[ 0.409382] pci 0000:00:1c.1: bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
[ 0.409389] pci 0000:00:1c.2: PCI bridge to [bus 0d]
[ 0.409392] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
[ 0.409397] pci 0000:00:1c.2: bridge window [mem 0xf0600000-0xf07fffff]
[ 0.409401] pci 0000:00:1c.2: bridge window [mem 0xf0800000-0xf09fffff 64bit pref]
[ 0.409412] pci 0000:03:01.0: BAR 0: assigned [mem 0xf4000000-0xf4000fff]
[ 0.409424] pci 0000:03:01.0: BAR 15: no space for [mem size 0x04000000 pref]
[ 0.409426] pci 0000:03:01.0: BAR 15: failed to assign [mem size 0x04000000 pref]
[ 0.409434] pci 0000:03:01.0: BAR 16: no space for [mem size 0x04000000]
[ 0.409436] pci 0000:03:01.0: BAR 16: failed to assign [mem size 0x04000000]
[ 0.409437] pci 0000:03:01.0: BAR 13: assigned [io 0x5000-0x50ff]
[ 0.409439] pci 0000:03:01.0: BAR 14: assigned [io 0x5400-0x54ff]
[ 0.409443] pci 0000:03:01.0: BAR 0: assigned [mem 0xf4000000-0xf4000fff]
[ 0.409453] pci 0000:03:01.0: BAR 16: no space for [mem size 0x04000000]
[ 0.409455] pci 0000:03:01.0: BAR 16: failed to assign [mem size 0x04000000]
[ 0.409464] pci 0000:03:01.0: BAR 15: no space for [mem size 0x04000000 pref]
[ 0.409465] pci 0000:03:01.0: BAR 15: failed to assign [mem size 0x04000000 pref]
[ 0.409467] pci 0000:03:01.0: CardBus bridge to [bus 04]
[ 0.409469] pci 0000:03:01.0: bridge window [io 0x5000-0x50ff]
[ 0.409473] pci 0000:03:01.0: bridge window [io 0x5400-0x54ff]
[ 0.409477] pci 0000:00:1e.0: PCI bridge to [bus 03-04]
[ 0.409480] pci 0000:00:1e.0: bridge window [io 0x5000-0x5fff]
[ 0.409485] pci 0000:00:1e.0: bridge window [mem 0xf6800000-0xf68fffff]
[ 0.409495] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.409497] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.409498] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.409500] pci_bus 0000:00: resource 7 [mem 0x000d8000-0x000dffff window]
[ 0.409501] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xf7ffffff window]
[ 0.409503] pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfebfffff window]
[ 0.409504] pci_bus 0000:00: resource 10 [mem 0xfec10000-0xfecfffff window]
[ 0.409506] pci_bus 0000:00: resource 11 [mem 0xfed1c000-0xfed1ffff window]
[ 0.409508] pci_bus 0000:00: resource 12 [mem 0xfed90000-0xfed9ffff window]
[ 0.409509] pci_bus 0000:00: resource 13 [mem 0xfed40000-0xfed44fff window]
[ 0.409510] pci_bus 0000:00: resource 14 [mem 0xfeda7000-0xfedfffff window]
[ 0.409512] pci_bus 0000:00: resource 15 [mem 0xfee10000-0xff9fffff window]
[ 0.409513] pci_bus 0000:00: resource 16 [mem 0xffc00000-0xffdfffff window]
[ 0.409515] pci_bus 0000:0b: resource 0 [io 0x2000-0x2fff]
[ 0.409517] pci_bus 0000:0b: resource 1 [mem 0xf0000000-0xf01fffff]
[ 0.409518] pci_bus 0000:0b: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
[ 0.409520] pci_bus 0000:0c: resource 0 [io 0x3000-0x3fff]
[ 0.409521] pci_bus 0000:0c: resource 1 [mem 0xf6900000-0xf69fffff]
[ 0.409522] pci_bus 0000:0c: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
[ 0.409524] pci_bus 0000:0d: resource 0 [io 0x4000-0x4fff]
[ 0.409525] pci_bus 0000:0d: resource 1 [mem 0xf0600000-0xf07fffff]
[ 0.409527] pci_bus 0000:0d: resource 2 [mem 0xf0800000-0xf09fffff 64bit pref]
[ 0.409528] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
[ 0.409530] pci_bus 0000:03: resource 1 [mem 0xf6800000-0xf68fffff]
[ 0.409531] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window]
[ 0.409533] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window]
[ 0.409534] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.409536] pci_bus 0000:03: resource 7 [mem 0x000d8000-0x000dffff window]
[ 0.409537] pci_bus 0000:03: resource 8 [mem 0xe0000000-0xf7ffffff window]
[ 0.409539] pci_bus 0000:03: resource 9 [mem 0xfc000000-0xfebfffff window]
[ 0.409540] pci_bus 0000:03: resource 10 [mem 0xfec10000-0xfecfffff window]
[ 0.409542] pci_bus 0000:03: resource 11 [mem 0xfed1c000-0xfed1ffff window]
[ 0.409543] pci_bus 0000:03: resource 12 [mem 0xfed90000-0xfed9ffff window]
[ 0.409545] pci_bus 0000:03: resource 13 [mem 0xfed40000-0xfed44fff window]
[ 0.409546] pci_bus 0000:03: resource 14 [mem 0xfeda7000-0xfedfffff window]
[ 0.409548] pci_bus 0000:03: resource 15 [mem 0xfee10000-0xff9fffff window]
[ 0.409549] pci_bus 0000:03: resource 16 [mem 0xffc00000-0xffdfffff window]
[ 0.409551] pci_bus 0000:04: resource 0 [io 0x5000-0x50ff]
[ 0.409552] pci_bus 0000:04: resource 1 [io 0x5400-0x54ff]
[ 0.409698] NET: Registered protocol family 2
[ 0.409981] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
[ 0.410007] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.410117] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.410285] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.410336] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.410363] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.410426] NET: Registered protocol family 1
[ 0.410432] NET: Registered protocol family 44
[ 0.410444] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.413552] PCI: CLS 64 bytes, default 64
[ 0.413606] Unpacking initramfs...
[ 1.075865] Freeing initrd memory: 39496K
[ 1.075903] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.075907] software IO TLB [mem 0xd904d000-0xdd04d000] (64MB) mapped at [(____ptrval____)-(____ptrval____)]
[ 1.076141] Scanning for low memory corruption every 60 seconds
[ 1.076960] Initialise system trusted keyrings
[ 1.076974] Key type blacklist registered
[ 1.077060] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[ 1.079236] zbud: loaded
[ 1.079920] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.080201] fuse init (API version 7.27)
[ 1.080282] pstore: using deflate compression
[ 1.081771] Key type asymmetric registered
[ 1.081773] Asymmetric key parser 'x509' registered
[ 1.081820] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 1.081859] io scheduler noop registered
[ 1.081860] io scheduler deadline registered
[ 1.081900] io scheduler cfq registered (default)
[ 1.082917] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.082996] vesafb: mode is 1280x768x32, linelength=5120, pages=0
[ 1.082997] vesafb: scrolling: redraw
[ 1.082999] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.083023] vesafb: framebuffer at 0xe0000000, mapped to 0x(____ptrval____), using 3840k, total 3840k
[ 1.083153] Console: switching to colour frame buffer device 160x48
[ 1.083182] fb0: VESA VGA frame buffer device
[ 1.083200] intel_idle: does not run on family 6 model 23
[ 1.083354] ACPI: AC Adapter [AC] (off-line)
[ 1.083436] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 1.083452] ACPI: Lid Switch [LID]
[ 1.083498] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 1.083506] ACPI: Power Button [PBTN]
[ 1.083550] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 1.083561] ACPI: Sleep Button [SBTN]
[ 1.083697] Monitor-Mwait will be used to enter C-1 state
[ 1.083701] Monitor-Mwait will be used to enter C-2 state
[ 1.083704] Monitor-Mwait will be used to enter C-3 state
[ 1.083707] tsc: Marking TSC unstable due to TSC halts in idle
[ 1.083765] clocksource: Switched to clocksource hpet
[ 1.093740] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.093741] ACPI: Thermal Zone [THM] (30 C)
[ 1.093991] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.114671] 00:05: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 1.138672] 0000:00:03.3: ttyS4 at I/O 0xef88 (irq = 17, base_baud = 115200) is a 16550A
[ 1.139021] Linux agpgart interface v0.103
[ 1.141447] loop: module loaded
[ 1.142523] scsi host0: ata_generic
[ 1.142691] scsi host1: ata_generic
[ 1.142734] ata1: PATA max UDMA/100 cmd 0xef78 ctl 0xef68 bmdma 0xef90 irq 18
[ 1.142735] ata2: PATA max UDMA/100 cmd 0xef80 ctl 0xef6c bmdma 0xef98 irq 18
[ 1.142892] libphy: Fixed MDIO Bus: probed
[ 1.142893] tun: Universal TUN/TAP device driver, 1.6
[ 1.142950] PPP generic driver version 2.4.2
[ 1.143010] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.143014] ehci-pci: EHCI PCI platform driver
[ 1.143262] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 1.143269] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.143295] ehci-pci 0000:00:1a.7: debug port 1
[ 1.147210] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 1.147221] ehci-pci 0000:00:1a.7: irq 22, io mem 0xfed1c400
[ 1.160049] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.160124] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[ 1.160127] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.160129] usb usb1: Product: EHCI Host Controller
[ 1.160132] usb usb1: Manufacturer: Linux 4.18.0-25-generic ehci_hcd
[ 1.160139] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.160393] hub 1-0:1.0: USB hub found
[ 1.160402] hub 1-0:1.0: 6 ports detected
[ 1.160864] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.160870] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.160882] ehci-pci 0000:00:1d.7: debug port 1
[ 1.164788] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 1.164801] ehci-pci 0000:00:1d.7: irq 20, io mem 0xfed1c000
[ 1.165758] ACPI: Battery Slot [BAT0] (battery present)
[ 1.165808] ACPI: Battery Slot [BAT1] (battery absent)
[ 1.180044] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.180121] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[ 1.180124] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.180127] usb usb2: Product: EHCI Host Controller
[ 1.180129] usb usb2: Manufacturer: Linux 4.18.0-25-generic ehci_hcd
[ 1.180137] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.180297] hub 2-0:1.0: USB hub found
[ 1.180304] hub 2-0:1.0: 6 ports detected
[ 1.180539] ehci-platform: EHCI generic platform driver
[ 1.180554] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.180558] ohci-pci: OHCI PCI platform driver
[ 1.180571] ohci-platform: OHCI generic platform driver
[ 1.180582] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.180786] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.180792] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.180800] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 1.180821] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f60
[ 1.180871] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18
[ 1.180873] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.180874] usb usb3: Product: UHCI Host Controller
[ 1.180875] usb usb3: Manufacturer: Linux 4.18.0-25-generic uhci_hcd
[ 1.180877] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.181013] hub 3-0:1.0: USB hub found
[ 1.181019] hub 3-0:1.0: 2 ports detected
[ 1.181354] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.181359] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.181369] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 1.181396] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f80
[ 1.181453] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18
[ 1.181454] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.181456] usb usb4: Product: UHCI Host Controller
[ 1.181457] usb usb4: Manufacturer: Linux 4.18.0-25-generic uhci_hcd
[ 1.181459] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.181604] hub 4-0:1.0: USB hub found
[ 1.181610] hub 4-0:1.0: 2 ports detected
[ 1.181922] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.181928] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.181935] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 1.181955] uhci_hcd 0000:00:1a.2: irq 22, io base 0x00006fa0
[ 1.182004] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18
[ 1.182006] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.182007] usb usb5: Product: UHCI Host Controller
[ 1.182008] usb usb5: Manufacturer: Linux 4.18.0-25-generic uhci_hcd
[ 1.182010] usb usb5: SerialNumber: 0000:00:1a.2
[ 1.182156] hub 5-0:1.0: USB hub found
[ 1.182163] hub 5-0:1.0: 2 ports detected
[ 1.182492] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.182498] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.182505] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 1.182524] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f00
[ 1.182573] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18
[ 1.182575] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.182576] usb usb6: Product: UHCI Host Controller
[ 1.182578] usb usb6: Manufacturer: Linux 4.18.0-25-generic uhci_hcd
[ 1.182579] usb usb6: SerialNumber: 0000:00:1d.0
[ 1.182718] hub 6-0:1.0: USB hub found
[ 1.182724] hub 6-0:1.0: 2 ports detected
[ 1.183031] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.183036] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.183043] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 1.183063] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f20
[ 1.183111] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18
[ 1.183113] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.183114] usb usb7: Product: UHCI Host Controller
[ 1.183116] usb usb7: Manufacturer: Linux 4.18.0-25-generic uhci_hcd
[ 1.183117] usb usb7: SerialNumber: 0000:00:1d.1
[ 1.183235] hub 7-0:1.0: USB hub found
[ 1.183242] hub 7-0:1.0: 2 ports detected
[ 1.183545] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.183553] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.183560] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 1.183579] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
[ 1.183629] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18
[ 1.183631] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.183632] usb usb8: Product: UHCI Host Controller
[ 1.183634] usb usb8: Manufacturer: Linux 4.18.0-25-generic uhci_hcd
[ 1.183635] usb usb8: SerialNumber: 0000:00:1d.2
[ 1.183768] hub 8-0:1.0: USB hub found
[ 1.183774] hub 8-0:1.0: 2 ports detected
[ 1.183987] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.184807] i8042: Warning: Keylock active
[ 1.187986] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.187991] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.188189] mousedev: PS/2 mouse device common for all mice
[ 1.188442] rtc_cmos 00:02: RTC can wake from S4
[ 1.188613] rtc_cmos 00:02: registered as rtc0
[ 1.188639] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.188648] i2c /dev entries driver
[ 1.188716] device-mapper: uevent: version 1.0.3
[ 1.188803] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[ 1.188833] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.189324] NET: Registered protocol family 10
[ 1.190663] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.195656] Segment Routing with IPv6
[ 1.195683] NET: Registered protocol family 17
[ 1.195740] Key type dns_resolver registered
[ 1.195947] RAS: Correctable Errors collector initialized.
[ 1.195998] microcode: sig=0x1067a, pf=0x80, revision=0xa0c
[ 1.196074] microcode: Microcode Update Driver: v2.2.
[ 1.196262] registered taskstats version 1
[ 1.196274] Loading compiled-in X.509 certificates
[ 1.199981] Loaded X.509 cert 'Build time autogenerated kernel key: 015552d29213a3bbc55f8c55bbf0148276022678'
[ 1.200020] zswap: loaded using pool lzo/zbud
[ 1.205350] Key type big_key registered
[ 1.205354] Key type trusted registered
[ 1.207904] Key type encrypted registered
[ 1.207908] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.207916] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 1.207922] ima: Allocated hash algorithm: sha1
[ 1.207945] evm: Initialising EVM extended attributes:
[ 1.207946] evm: security.selinux
[ 1.207947] evm: security.SMACK64
[ 1.207947] evm: security.SMACK64EXEC
[ 1.207948] evm: security.SMACK64TRANSMUTE
[ 1.207949] evm: security.SMACK64MMAP
[ 1.207949] evm: security.apparmor
[ 1.207950] evm: security.ima
[ 1.207951] evm: security.capability
[ 1.207951] evm: HMAC attrs: 0x1
[ 1.208535] Magic number: 11:636:566
[ 1.208715] rtc_cmos 00:02: setting system clock to 2019-07-29 04:35:46 UTC (1564374946)
[ 1.210363] Unstable clock detected, switching default tracing clock to "global"
If you want to keep using the local clock, then add:
"trace_clock=local"
on the kernel command line
[ 1.482731] Freeing unused kernel image memory: 2456K
[ 1.492083] Write protecting the kernel read-only data: 20480k
[ 1.493248] Freeing unused kernel image memory: 2008K
[ 1.494096] Freeing unused kernel image memory: 1900K
[ 1.508103] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.508104] x86/mm: Checking user space page tables
[ 1.521714] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.685745] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.685746] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.686079] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.694450] sdhci: Secure Digital Host Controller Interface driver
[ 1.694451] sdhci: Copyright(c) Pierre Ossman
[ 1.697850] sdhci-pci 0000:03:01.2: SDHCI controller found [1180:0822] (rev 21)
[ 1.698033] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[ 1.698164] mmc0: SDHCI controller on PCI [0000:03:01.2] using DMA
[ 1.702337] ahci 0000:00:1f.2: version 3.0
[ 1.702653] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.702694] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl RAID mode
[ 1.702696] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
[ 1.708028] usb 3-1: new full-speed USB device
0
Réponse 6 / 12
dprave Messages postés 52 Date d'inscription jeudi 9 juin 2011 Statut Membre Dernière intervention 27 avril 2020
Modifié le 29 juil. 2019 à 07:43
Pour sudo il me demande le mot de passe pais je ne peut pas le taper??
Voila le résultat pour lsusb1 

Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 002: ID 046d:c52f Logitech, Inc. Unifying Receiver
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 0c45:63f0 Microdia 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 002: ID 0a5c:5801 Broadcom Corp. BCM5880 Secure Applications Processor with fingerprint swipe sensor
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 005: ID 413c:8156 Dell Computer Corp. Wireless 370 Bluetooth Mini-card
Bus 003 Device 004: ID 413c:8158 Dell Computer Corp. Integrated Touchpad / Trackstick
Bus 003 Device 003: ID 413c:8157 Dell Computer Corp. Integrated Keyboard
Bus 003 Device 002: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


Voila le résultat pour lsusb2 

Bus 002 Device 009: ID 0781:5580 SanDisk Corp. SDCZ80 Flash Drive
Bus 002 Device 010: ID 13fd:0840 Initio Corporation INIC-1618L SATA
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 002: ID 046d:c52f Logitech, Inc. Unifying Receiver
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 0c45:63f0 Microdia 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 002: ID 0a5c:5801 Broadcom Corp. BCM5880 Secure Applications Processor with fingerprint swipe sensor
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 005: ID 413c:8156 Dell Computer Corp. Wireless 370 Bluetooth Mini-card
Bus 003 Device 004: ID 413c:8158 Dell Computer Corp. Integrated Touchpad / Trackstick
Bus 003 Device 003: ID 413c:8157 Dell Computer Corp. Integrated Keyboard
Bus 003 Device 002: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Je ne sais pas mettre les chevronnets.
J'ai deux disques dur externe et une clé usb de brancher mais je crois que la clé est mal formater en plus gparted ne veux pas se lancer sur mon ubuntu.
Merci pour vos réponses.

J'ai reuçie pour sudo fdisk -l 

Disque /dev/loop17 : 2,3 MiB, 2355200 octets, 4600 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets


Disque /dev/loop18 : 236 MiB, 247422976 octets, 483248 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets


Disque /dev/sdb : 14,9 GiB, 16013942784 octets, 31277232 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Type d'étiquette de disque : dos
Identifiant de disque : 0x69eb2f0a

Périphérique Amorçage Début      Fin Secteurs Taille Id Type
/dev/sdb1                32 31266815 31266784  14,9G  7 HPFS/NTFS/exFAT

là je n'avais qu'une clé et un disque dur externe
0
Réponse 7 / 12
Malekal_morte- Messages postés 180304 Date d'inscription mercredi 17 mai 2006 Statut Modérateur, Contributeur sécurité Dernière intervention 15 décembre 2020 24 627
Modifié le 29 juil. 2019 à 10:13
Le dmesg doit être coupé à la fin et pas entier ?
Tu peux recommencer, il faut bien utiliser dmesg après avoir inséré les clés et disques.
Ensuite copier/coller dans un fichier texte et l'enregistrer.

Envoie le fichier sur https://pjjoint.malekal.com
et donne le lien en retour.

0
Réponse 8 / 12
dprave Messages postés 52 Date d'inscription jeudi 9 juin 2011 Statut Membre Dernière intervention 27 avril 2020
29 juil. 2019 à 10:23
Ok je fais ça au mieux quand je rentre chez moi
0
zipe31 Messages postés 36402 Date d'inscription dimanche 7 novembre 2010 Statut Contributeur Dernière intervention 27 janvier 2021 6 407
29 juil. 2019 à 11:10
Je te redonne la procédure pour ne copier/coller que ce qui nous intéresse :
  • Débrancher tous les périphériques USB que tu veux lister
  • Ouvrir un terminal
  • Lancer la commande 
    dmesg -w
  • Créer 2 ou 3 lignes vides en appuyant 2 ou 3 fois sur la touche <Entrée>
  • Brancher un des périphériques USB
  • Copier/coller les lignes apparues sur le terminal à partir des lignes vides précédemment créées


Ci-dessous un exemple. Ce qui nous intéresse est encadré en rouge (après les lignes vides). En jaune un exemple de dénomination pour une clé USB :

0
Réponse 9 / 12
dprave Messages postés 52 Date d'inscription jeudi 9 juin 2011 Statut Membre Dernière intervention 27 avril 2020
29 juil. 2019 à 11:38
Ok
0
dprave Messages postés 52 Date d'inscription jeudi 9 juin 2011 Statut Membre Dernière intervention 27 avril 2020
Modifié le 29 juil. 2019 à 13:50
Voila se que j'ai eu pour ma clé usb 
[  977.796047] usb 2-2: new high-speed USB device number 5 using ehci-pci
[  977.957142] usb 2-2: New USB device found, idVendor=0781, idProduct=5580, bcdDevice= 0.10
[  977.957145] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  977.957147] usb 2-2: Product: Extreme
[  977.957149] usb 2-2: Manufacturer: SanDisk
[  977.957150] usb 2-2: SerialNumber: AA011027141111260827
[  977.957438] usb-storage 2-2:1.0: USB Mass Storage device detected
[  977.963295] scsi host8: usb-storage 2-2:1.0
[  978.976679] scsi 8:0:0:0: Direct-Access     SanDisk  Extreme          0001 PQ: 0 ANSI: 6
[  978.977027] sd 8:0:0:0: Attached scsi generic sg2 type 0
[  978.977651] sd 8:0:0:0: [sdb] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB)
[  978.978658] sd 8:0:0:0: [sdb] Write Protect is off
[  978.978661] sd 8:0:0:0: [sdb] Mode Sense: 53 00 00 08
[  978.979660] sd 8:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  978.988599]  sdb: sdb1
[  978.992497] sd 8:0:0:0: [sdb] Attached SCSI removable disk


Se que je ne comprend pas c'est quand je branche ma clé juste après le boot de linux souvent elle est reconnue

Voila pour le disque dur 
[ 1850.240043] usb 2-4: new high-speed USB device number 6 using ehci-pci
[ 1850.445160] usb 2-4: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 1.00
[ 1850.445163] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1850.445165] usb 2-4: Product: USB3.0 External HDD
[ 1850.445166] usb 2-4: Manufacturer: JMicron
[ 1850.445167] usb 2-4: SerialNumber: 0000AB1237D1
[ 1850.445841] scsi host8: uas
[ 1850.450410] scsi 8:0:0:0: Direct-Access     ST916041 1AS              8101 PQ: 0 ANSI: 6
[ 1850.455948] sd 8:0:0:0: Attached scsi generic sg2 type 0
[ 1851.272595] usb 2-4: USB disconnect, device number 6
[ 1851.272917] sd 8:0:0:0: tag#0 uas_zap_pending 0 uas-tag 1 inflight: CMD 
[ 1851.272920] sd 8:0:0:0: tag#0 CDB: Test Unit Ready 00 00 00 00 00 00
[ 1851.512178] sd 8:0:0:0: [sdb] Read Capacity(16) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[ 1851.512182] sd 8:0:0:0: [sdb] Sense not available.
[ 1851.752131] sd 8:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[ 1851.752135] sd 8:0:0:0: [sdb] Sense not available.
[ 1851.848104] sd 8:0:0:0: [sdb] 0 512-byte logical blocks: (0 B/0 B)
[ 1851.848108] sd 8:0:0:0: [sdb] 0-byte physical blocks
[ 1851.928087] sd 8:0:0:0: [sdb] Write Protect is on
[ 1851.928091] sd 8:0:0:0: [sdb] Mode Sense: 00 46 b7 91
[ 1852.012176] sd 8:0:0:0: [sdb] Asking for cache data failed
[ 1852.012183] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 1852.476168] sd 8:0:0:0: [sdb] Read Capacity(16) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[ 1852.476172] sd 8:0:0:0: [sdb] Sense not available.
[ 1852.716184] sd 8:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[ 1852.716188] sd 8:0:0:0: [sdb] Sense not available.
[ 1852.892145] sd 8:0:0:0: [sdb] Write Protect is off
[ 1852.892149] sd 8:0:0:0: [sdb] Mode Sense: 98 43 00 ca
[ 1853.196117] sd 8:0:0:0: [sdb] Attached SCSI disk
[ 1854.305306] perf: interrupt took too long (4938 > 4928), lowering kernel.perf_event_max_sample_rate to 40500
0
Malekal_morte- Messages postés 180304 Date d'inscription mercredi 17 mai 2006 Statut Modérateur, Contributeur sécurité Dernière intervention 15 décembre 2020 24 627 > dprave Messages postés 52 Date d'inscription jeudi 9 juin 2011 Statut Membre Dernière intervention 27 avril 2020
Modifié le 29 juil. 2019 à 14:36
On dirait qu'il y a des erreurs de lectures

Read Capacity(16) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK

Quand tu utilises le disque et que tu as terminé, tu éjectes bien sur Windows ?
Peut-être que le système de fichiers est marqué en erreur.
Il fonctionne bien de manière générale, pas d'erreur de copies ou autres ?

Ce serait bien de faire un checkdisk depuis Windows.
Voir là : https://www.malekal.com/chkdsk-erreur-reparation-disque/
Tu peux faire la vérification en graphique.

ou depuis Ubuntu : 
sudo fsck -V -n /dev/sdb1


A toi de voir le plus simple.

~~

Vérifie aussi les disques dur externes avec CrystalDiskInfo
ou depuis Ubuntu avec GSmartControl
0
Réponse 10 / 12
dprave Messages postés 52 Date d'inscription jeudi 9 juin 2011 Statut Membre Dernière intervention 27 avril 2020
29 juil. 2019 à 16:47
Pas de soucis je fait ça le disque dur vient de mon pc portable que j’ai remplacé par un ssd j’ai formaté le système pour en faire un dd externe
0
jns55
29 juil. 2019 à 19:12
Bonjour,
j’ai formaté le système pour en faire un dd externe
Quel format ? ntfs, fat32, ext4 , autre ?
Tu l'as formaté comment ?

Si on se fie aux résultats de la commande dmesg, il n'est pas possible de déterminer la taille du disque... il a un souci ton disque.

Et si gparted ne se lance pas, c'est pas normal, ton install d'ubuntu est sans doute bancale. Essaie avec le live-usb. Si c'est la même chose, il faudrait vérifier l'intégrité de l'image iso avec la somme de contrôle md5.
0
dprave Messages postés 52 Date d'inscription jeudi 9 juin 2011 Statut Membre Dernière intervention 27 avril 2020
29 juil. 2019 à 19:29
Impossible de réparer le disque avec windows même avec CrystalDiskInfo
Il était formater en ntfs avec windows puis j'ai voulu en faire un dd bootable pour windows 10 je n'y suis pas arrivé donc reformatage
Je suis en train de le réparer avec easaus partition master je vous tiens au courant
0
dprave Messages postés 52 Date d'inscription jeudi 9 juin 2011 Statut Membre Dernière intervention 27 avril 2020 > dprave Messages postés 52 Date d'inscription jeudi 9 juin 2011 Statut Membre Dernière intervention 27 avril 2020
29 juil. 2019 à 23:46
Disque dur réparer et détecté sous windows tous va bien je vois demain sous linux
0
dprave Messages postés 52 Date d'inscription jeudi 9 juin 2011 Statut Membre Dernière intervention 27 avril 2020 > dprave Messages postés 52 Date d'inscription jeudi 9 juin 2011 Statut Membre Dernière intervention 27 avril 2020
Modifié le 30 juil. 2019 à 08:29
Bonjour
Voile se que j'obtiens avec mon disque dur après réparation 

[  260.124058] usb 2-2: new high-speed USB device number 3 using ehci-pci
[  260.322327] usb 2-2: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 1.00
[  260.322331] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  260.322333] usb 2-2: Product: USB3.0 External HDD
[  260.322334] usb 2-2: Manufacturer: JMicron
[  260.322336] usb 2-2: SerialNumber: 0000AB1237D1


Comment voir si mon ubuntu est bancale comme tu dit???
0
zipe31 Messages postés 36402 Date d'inscription dimanche 7 novembre 2010 Statut Contributeur Dernière intervention 27 janvier 2021 6 407
30 juil. 2019 à 08:35
Si les infos s'arrêtent là, c'est qu'il y a encore un souci ;-(
Ton disque est détecté, mais aucune info sur sa table de partitions et/ou, à défaut, sa structure n'est remontée ;-(
0
Réponse 11 / 12
dprave Messages postés 52 Date d'inscription jeudi 9 juin 2011 Statut Membre Dernière intervention 27 avril 2020
31 juil. 2019 à 12:24
Voila le résultat 
/dev/sda1 on / type ext4 (rw,relatime,errors=remount-ro)
/dev/sdb1 on /media/dprave/Dprave type fuseblk (rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096,uhelper=udisks2)
0
zipe31 Messages postés 36402 Date d'inscription dimanche 7 novembre 2010 Statut Contributeur Dernière intervention 27 janvier 2021 6 407
31 juil. 2019 à 13:36 
/dev/sdb1 on /media/dprave/Dprave type fuseblk

Ben voilà, ton disque est accessible via 
/media/dprave/Dprave
et tu devrais le voir dans l'explorateur de fichiers…
0
dprave Messages postés 52 Date d'inscription jeudi 9 juin 2011 Statut Membre Dernière intervention 27 avril 2020 > zipe31 Messages postés 36402 Date d'inscription dimanche 7 novembre 2010 Statut Contributeur Dernière intervention 27 janvier 2021
31 juil. 2019 à 13:54
Exactement je le vois nickel merci
J'aurais d'autre question un peut plus tard je doit partir
0
dprave Messages postés 52 Date d'inscription jeudi 9 juin 2011 Statut Membre Dernière intervention 27 avril 2020
Modifié le 31 juil. 2019 à 18:42
Bonsoir
Gparted ne se lance toujours pas sur mon pc là je viens de brancher mon dd et uns clé usb et je ne les vois pas
J'en ai marre alors que sous windows tous va bien
0
jns55
31 juil. 2019 à 20:31
Gparted ne démarre pas ou bien il démarre et tu ne vois pas ton disque dur et ta clé usb ? (c'est pas la même chose)
0
dprave Messages postés 52 Date d'inscription jeudi 9 juin 2011 Statut Membre Dernière intervention 27 avril 2020 > jns55
Modifié le 31 juil. 2019 à 21:18
Non le logiciel ne démarre pas donc impossible de voire le disque ou les clés et pourquoi mon Linux ne les détecte pas de suite comme Windows?
0
Réponse 12 / 12
dprave Messages postés 52 Date d'inscription jeudi 9 juin 2011 Statut Membre Dernière intervention 27 avril 2020
31 juil. 2019 à 19:31
ça y est enfin détecter je comprend pas
0

Discussions similaires

Convertir musique sur ma clef USB en MP3 ou WMA
Apol123 -
barale61 -

1 réponse