Universal Remote ZN-401S
Solved
Bbbbbbb
-
Joe -
Joe -
Hello,
How to make a universal remote ZN-401S work with a DVD
player Philips dvp3620/F7
Configuration: Android / Chrome 63.0.3239.111
How to make a universal remote ZN-401S work with a DVD
player Philips dvp3620/F7
Configuration: Android / Chrome 63.0.3239.111
2 réponses
Hello,
See with code 176 ..
https://www.remotecodelist.com/remotes/zenith/zen100-700.pdf
" Manually turn on the device you want to program.
Press and hold the CODE SEARCH button until the indicator light turns on, then release the CODE SEARCH button.
Press TV, VCR, CBL, or AUX (depending on the device you want to program). The light will blink again then stay on.
Cycle through the codes by pressing and releasing the POWER button. Keep pressing POWER until the device turns off, this may take up to 300 attempts. (If skipping a code, press CHANNEL DOWN to save)
Press MUTE to complete the setup.
Now read below to find out how to identify your code number for future use.
COPYING THE CODE:
Press and hold CODE SEARCH until the light comes on. Release the CODE SEARCH button.
Press and release the desired mode button (TV, VCR, CBL, or AUX). The light will blink once to indicate
Key press acceptance.
Press and release the CODE SEARCH button. The light will go off to indicate acceptance of the press.
To find the first digit, press the numeric keys from 0 to 9. When the light blinks once, that number is the first recorded digit. Repeat to find the second recorded digit. Repeat to find the second digit.
To find the third digit, repeat step four. This time the light stays off once the key corresponding to the third digit is pressed.
Note the code for future reference. "
http://www.gowithboh.com/s/code-manette-universelle-zenith/
https://fr.wikihow.com/programmer-une-t%C3%A9l%C3%A9commande-RCA-universelle
--
The enemy is foolish: he thinks we are the enemy when it is him!
Pierre Desproges
See with code 176 ..
https://www.remotecodelist.com/remotes/zenith/zen100-700.pdf
" Manually turn on the device you want to program.
Press and hold the CODE SEARCH button until the indicator light turns on, then release the CODE SEARCH button.
Press TV, VCR, CBL, or AUX (depending on the device you want to program). The light will blink again then stay on.
Cycle through the codes by pressing and releasing the POWER button. Keep pressing POWER until the device turns off, this may take up to 300 attempts. (If skipping a code, press CHANNEL DOWN to save)
Press MUTE to complete the setup.
Now read below to find out how to identify your code number for future use.
COPYING THE CODE:
Press and hold CODE SEARCH until the light comes on. Release the CODE SEARCH button.
Press and release the desired mode button (TV, VCR, CBL, or AUX). The light will blink once to indicate
Key press acceptance.
Press and release the CODE SEARCH button. The light will go off to indicate acceptance of the press.
To find the first digit, press the numeric keys from 0 to 9. When the light blinks once, that number is the first recorded digit. Repeat to find the second recorded digit. Repeat to find the second digit.
To find the third digit, repeat step four. This time the light stays off once the key corresponding to the third digit is pressed.
Note the code for future reference. "
http://www.gowithboh.com/s/code-manette-universelle-zenith/
https://fr.wikihow.com/programmer-une-t%C3%A9l%C3%A9commande-RCA-universelle
--
The enemy is foolish: he thinks we are the enemy when it is him!
Pierre Desproges
Noob
Super, it worked (the first one, I haven't tested the second one). Thanks again.
MPMP10
Posted messages
46984
Registration date
Status
Membre
Last intervention
18 841
>
Noob
You're welcome.