View original (French)

Appuyez sur entrée pour interrompre le démarrage normal

Xenode Posted messages 5 Status Membre -  
PouletEnergique39 Posted messages 1 Status Membre -
Hello, I need a little help to remove the startup message that says: "press enter to interrupt normal startup." You might ask how this is bothersome; it just takes a lot of time to boot up since the message appears (P.S.: I have a Lenovo T440s running Windows 10).

4 réponses

Réponse 1 / 4
Anonymous user
 
Good evening,
This type of message is normal at startup. By pressing "Enter" you will enter the BIOS. I don't think the slow startup is related to this message.

Do you have a lot of programs launching at startup? That might be the cause.

It could also be a hard drive issue, which is quite common on laptops. A test with CrystalDiskInfo can help eliminate doubts.
9
Xenode Posted messages 5 Status Membre 2
 
Yes, but before it didn't do this to me... before there was no BIOS either and everything was fast...
1
Anonymous user
 
How long do you see the message "Press enter to interrupt normal setup"?
More generally, at what point during startup does the PC seem to take a long time?
0
Xenode Posted messages 5 Status Membre 2 > Anonymous user
 
About 15 seconds after pressing the on button.
0
Anonymous user
 
It's true that 15 seconds feels long on this screen. Usually, it's more like 3 seconds. Maybe the computer is trying to figure out what to boot from.
In the BIOS settings, you need to check that the hard drive with Windows is set as the first boot option. If a USB stick, external hard drive, or SD card is plugged in, it needs to be unplugged.

If none of that works, it might be that the hard drive isn't functioning properly. As I mentioned earlier, you should check with CrystalDiskInfo.
1
Xenode Posted messages 5 Status Membre 2 > Anonymous user
 
Okay, thank you very much for your help :)
1
Réponse 2 / 4
Fred
 
Hello and thank you,
I know the post is a bit old but I managed to solve the same problem today, if that can help.
You need to make sure there is no USB plugged in. For me, it was a webcam that was blocking the startup...
11
Fred_le_heros
 
Thank you so much for the post update! I bought a wireless controller and plugged the dongle into the PC and I didn't even make the connection!

You've saved me; I almost thought I didn't have a PC anymore because even the keyboard wasn't responding...

Thanks again!!
0
Guel
 

You saved my life.

For me, it was my phone that was plugged into the PC via cable, which was blocking the startup.

1
ISA
 

Hello, thanks for the help indeed! For my part, it was a wireless mouse that was blocking the startup. Thanks a thousand times again ????

0
PouletEnergique39 Posted messages 1 Status Membre
 

OK

0
Réponse 3 / 4
levo
 
or more simply, go check if fast startup is enabled in the power options,
if it is not, enable it and see the difference, I have already had this problem on a few machines running W10
2
Réponse 4 / 4
Malekal_morte- Posted messages 178136 Registration date   Status Modérateur, Contributeur sécurité Last intervention   24 710
 
Hi,

Reset the BIOS settings to default: https://www.malekal.com/reinitialiser-parametres-bios-defaut/
This should remove the message.

--
Please press a key to continue the disinfection...
0
Xenode Posted messages 5 Status Membre 2
 
I've already done it, it doesn't work :(
0
Malekal_morte- Posted messages 178136 Registration date   Status Modérateur, Contributeur sécurité Last intervention   24 710 > Xenode Posted messages 5 Status Membre
 
Is it a Lenovo?

Make sure the HDD is first in the boot order.
Set "Option Key Display" to Disable.
Save the changes and exit the BIOS.

0