Antenne en surcharge
Solved
Hello,
I have a TV in my living room and a TV in my kitchen (both work with the TNT signal from the rooftop antenna),
I just replaced one of the TVs with a Samsung connected 4K that works very well.
However, since then, the kitchen TV displays "antenna overload" and I can no longer change anything. If I unplug the antenna from the Samsung, then the kitchen TV works normally.
What can I do to watch both TVs without any issues?
Thank you.
I have a TV in my living room and a TV in my kitchen (both work with the TNT signal from the rooftop antenna),
I just replaced one of the TVs with a Samsung connected 4K that works very well.
However, since then, the kitchen TV displays "antenna overload" and I can no longer change anything. If I unplug the antenna from the Samsung, then the kitchen TV works normally.
What can I do to watch both TVs without any issues?
Thank you.
2 réponses
I found nothing in the manual regarding such a function...
How is the signal distributed between these two TVs, simple T, splitter?
Otherwise, try resetting the Samsung:
Settings>Support > Self Diagnosis>Reset.
But you will have to set everything up again from the beginning, just like when you first plugged it in.
--
I call a spade a spade *
*in French in the text
How is the signal distributed between these two TVs, simple T, splitter?
Otherwise, try resetting the Samsung:
Settings>Support > Self Diagnosis>Reset.
But you will have to set everything up again from the beginning, just like when you first plugged it in.
--
I call a spade a spade *
*in French in the text
It's a Samsung UE40KU6000W.