View original (French)

Erreur de somme de contrôle

Solved
IsaB -  
Cesel45 Posted messages 13762 Registration date   Status Contributor Last intervention   -
Hello, my computer (HP laptop) shows me the following error message when I turn it on:

Checksum error
Press f1 to load Cmos Default value
Press f10 to BIOS setup options

I really don't know much about computers and I'm afraid to touch anything for fear of losing everything... can you help me??? Thank you very much!!!

2 answers

  1. IsaB
     
    Thank you very much for this clarification! And how do I access the location of the battery in question? Thank you!
    3
    1. Cesel45 Posted messages 13762 Registration date   Status Contributor Last intervention   2 845
       
      You need to open the laptop.

      Access to the motherboard ===> https://www.commentcamarche.net/informatique/composants/1447-erreur-de-bios-changer-la-pile-de-la-carte-mere/
      0
      1. IsaB > Cesel45 Posted messages 13762 Registration date   Status Contributor Last intervention  
         
        Hello Cesel, thank you very much. I didn't feel up to doing it myself, but the problem has been resolved and it was indeed the motherboard battery!!!
        0
      2. Cesel45 Posted messages 13762 Registration date   Status Contributor Last intervention   2 845 > IsaB
         
        Good continuation..!!!
        0
  2. Cesel45 Posted messages 13762 Registration date   Status Contributor Last intervention   2 845
     
    Hello

    The message "Checksum Error" is generally attributed to the motherboard battery which may be faulty or delivering a voltage that is too low. Simply replace this battery with one of the same type (CR2032 battery in most cases, available commercially).

    If you have a multimeter, test the voltage across the terminals of your battery before buying another one. If the measured voltage is below 2.90V, replace it.

    --
    Have a nice day.
    Cesel45
    1