View original (French)

Split screen on Packard Bell

cathcasani Posted messages 1 Status Member -  
 hassane -
Hello everyone
a small problem, I need to repair a Packard Bell whose screen is cut in two horizontally.
I think the graphics card needs to be replaced but I’d like to be sure.
thanks to you

1 answer

  1.
    ronrondu16 Posted messages 59 Status Member 4
     
    Hello,

    check if it works in safe mode.
    Try uninstalling and reinstalling the GPU driver.
    Connect another monitor if it does the same.

    I’m probably forgetting other points to check, but the main ones are there in my opinion.
    0
    1. hassane
       
      Hi dear friends, does the problem still persist? Because I have the best solution.
      0
    2. titoumady Posted messages 188 Status Member 35 > hassane
       
      balance instead of letting it simmer, that can help some people.
      0
    3. Hassane
       
      I'm just waiting to see if you still have the same problem. First you disassemble your PACKARD BELL PC, then you look for the location of your graphics card (it's located just below the copper ducts of the fan). You heat it with a hair dryer for one or two minutes. You reassemble the fan and turn on your laptop. And finally the problem is solved. I'm waiting for your response and I hope it will be "THANKS MY DEAR FRIEND." Good luck.
      0
    4. Hassane > titoumady Posted messages 188 Status Member
       
      I’m just waiting to see if you still have the same problem
      First you disassemble your PACKARD BELL PC, then you look for the location of your graphics card (it is located just below the copper pipes of the fan). You heat it with a hair dryer for one or two minutes. You reassemble the fan and turn on your laptop. And finally the problem is solved. I’m waiting for your response and I hope it will be "THANK YOU MY DEAR FRIEND". Good luck.
      0
    5. Hassane
       
      You can follow this instructional video https://www.youtube.com/watch?v=nxmGjV3_FtY
      0