View original (French)

Issue with my Epson Stylus SX115 printer

emalis Posted messages 6 Status Member -  
glg29 Posted messages 29751 Registration date   Status Contributor Last intervention   -
Hello,

I have a printing problem, and every time it says that I have insufficient memory or that files are missing.

I have uninstalled and reinstalled the drivers several times, and I get the same message.

PS: I no longer have the installation CD.

If anyone has a solution, I would be grateful.

Configuration: Windows 7 / Chrome 38.0.2125.104

2 answers

  1.
    glg29 Posted messages 29751 Registration date   Status Contributor Last intervention   4 584
     
    Hello,
    It’s not XS115, but probably SX115 your printer!
    Is Windows 7 a 32-bit or 64-bit version?
    To find out, Start, right-click on Computer, Properties, it’s noted on the line System type.
    Best regards.
    0
    1. emalis Posted messages 6 Status Member
       
      Yes, I reversed the letters and I have Windows 7 in 64 bits.
      0
    2. emalis Posted messages 6 Status Member > emalis Posted messages 6 Status Member
       
      I have already tried changing the driver properties for compatibility and running the driver as an administrator, but that didn't change anything either.
      0
    3. glg29 Posted messages 29751 Registration date   Status Contributor Last intervention   4 584
       
      Very well, I will correct the title of the question.
      Ok, for Windows 7 64 bits.
      I suggest you completely uninstall this printer, then start a clean installation.
      Before that, everything related to Epson SX115 must disappear from the computer, drivers, software, everything that is currently present must be removed, mandatory.
      Once this is done, disconnect the printer from the PC and restart the computer.
      Download, save, and install this driver Epson Stylus SX115 Driver 6.61.
      During the installation, when prompted, connect the printer to the PC.
      Download, save, and install EPSON Scan 3.731 next, to be able to manage the scanner.
      In principle, the printer should work normally after that.
      @+
      0
    4. emalis Posted messages 6 Status Member
       
      I am stuck, I receive a message saying that the entire printer driver cannot be installed.
      0
    5. glg29 Posted messages 29751 Registration date   Status Contributor Last intervention   4 584
       
      Did you do everything that was indicated?
      Did you manage to download the driver?
      See you later.
      0
  2. glg29 Posted messages 29751 Registration date   Status Contributor Last intervention   4 584
     
    Surprising, it is compatible according to the manufacturer's site, proof in the image below.

    I don't understand what's going on for the moment!
    See you later

    --
    He who does not please upon arrival, ALWAYS pleases upon departure!
    Breizh a tao
    0
    1. emalis Posted messages 6 Status Member
       
      B me neither since it worked on my computer before!
      0
    2. glg29 Posted messages 29751 Registration date   Status Contributor Last intervention   4 584
       
      Maybe it was running with a native Windows 7 driver, unplug it from the PC and restart the computer, connect it again and look for updates for Windows 7 with Windows Update.
      @+
      0